No products in the cart.

Sailing Ellidah is supported by our readers. Buying through our links may earn us an affiliate commission at no extra cost to you.

The Standing Rigging On A Sailboat Explained

The standing rigging on a sailboat is a system of stainless steel wires that holds the mast upright and supports the spars.

In this guide, I’ll explain the basics of a sailboat’s hardware and rigging, how it works, and why it is a fundamental and vital part of the vessel. We’ll look at the different parts of the rig, where they are located, and their function.

We will also peek at a couple of different types of rigs and their variations to determine their differences. In the end, I will explain some additional terms and answer some practical questions I often get asked.

But first off, it is essential to understand what standing rigging is and its purpose on a sailboat.

The purpose of the standing rigging

Like I said in the beginning, the standing rigging on a sailboat is a system of stainless steel wires that holds the mast upright and supports the spars. When sailing, the rig helps transfer wind forces from the sails to the boat’s structure. This is critical for maintaining the stability and performance of the vessel.

The rig can also consist of other materials, such as synthetic lines or steel rods, yet its purpose is the same. But more on that later.

Since the rig supports the mast, you’ll need to ensure that it is always in appropriate condition before taking your boat out to sea. Let me give you an example from a recent experience.

Dismasting horrors

I had a company inspect the entire rig on my sailboat while preparing for an Atlantic crossing. The rigger didn’t find any issues, but I decided to replace the rig anyway because of its unknown age. I wanted to do the job myself so I could learn how it is done correctly.

Not long after, we left Gibraltar and sailed through rough weather for eight days before arriving in Las Palmas. We were safe and sound and didn’t experience any issues. Unfortunately, several other boats arriving before us had suffered rig failures. They lost their masts and sails—a sorrowful sight but also a reminder of how vital the rigging is on a sailboat.

The most common types of rigging on a sailboat

The most commonly used rig type on modern sailing boats is the fore-and-aft Bermuda Sloop rig with one mast and just one headsail. Closely follows the Cutter rig and the Ketch rig. They all have a relatively simple rigging layout. Still, there are several variations and differences in how they are set up.

A sloop has a single mast, and the Ketch has one main mast and an additional shorter mizzen mast further aft. A Cutter rig is similar to the Bermuda Sloop with an additional cutter forestay, allowing it to fly two overlapping headsails.

You can learn more about the differences and the different types of sails they use in this guide. For now, we’ll focus on the Bermuda rig.

The difference between standing rigging and running rigging

Sometimes things can get confusing as some of our nautical terms are used for multiple items depending on the context. Let me clarify just briefly:

The  rig  or  rigging  on a sailboat is a common term for two parts:

  • The  standing rigging  consists of wires supporting the mast on a sailboat and reinforcing the spars from the force of the sails when sailing.
  • The  running rigging  consists of the halyards, sheets, and lines we use to hoist, lower, operate, and control the sails on a sailboat.

Check out my guide on running rigging here !

The difference between a fractional and a masthead rig

A Bermuda rig is split into two groups. The  Masthead  rig and the  Fractional  rig.

The  Masthead  rig has a forestay running from the bow to the top of the mast, and the spreaders point 90 degrees to the sides. A boat with a masthead rig typically carries a bigger overlapping headsail ( Genoa)  and a smaller mainsail. Very typical on the Sloop, Ketch, and Cutter rigs.

A  Fractional  rig has forestays running from the bow to 1/4 – 1/8 from the top of the mast, and the spreaders are swept backward. A boat with a fractional rig also has the mast farther forward than a masthead rig, a bigger mainsail, and a smaller headsail, usually a Jib. Very typical on more performance-oriented sailboats.

There are exceptions in regards to the type of headsail, though. Many performance cruisers use a Genoa instead of a Jib , making the difference smaller.

Some people also fit an inner forestay, or a babystay, to allow flying a smaller staysail.

Explaining the parts and hardware of the standing rigging

The rigging on a sailing vessel relies on stays and shrouds in addition to many hardware parts to secure the mast properly. And we also have nautical terms for each of them. Since a system relies on every aspect of it to be in equally good condition, we want to familiarize ourselves with each part and understand its function.

Forestay and Backstay

The  forestay  is a wire that runs from the bow to the top of the mast. Some boats, like the Cutter rig, can have several additional inner forestays in different configurations.

The  backstay  is the wire that runs from the back of the boat to the top of the mast. Backstays have a tensioner, often hydraulic, to increase the tension when sailing upwind. Some rigs, like the Cutter, have running backstays and sometimes checkstays or runners, to support the rig.

The primary purpose of the forestay and backstay is to prevent the mast from moving fore and aft. The tensioner on the backstay also allows us to trim and tune the rig to get a better shape of the sails.

The shrouds are the wires or lines used on modern sailboats and yachts to support the mast from sideways motion.

There are usually four shrouds on each side of the vessel. They are connected to the side of the mast and run down to turnbuckles attached through toggles to the chainplates bolted on the deck.

  • Cap shrouds run from the top of the mast to the deck, passing through the tips of the upper spreaders.
  • Intermediate shrouds  run from the lower part of the mast to the deck, passing through the lower set of spreaders.
  • Lower shrouds  are connected to the mast under the first spreader and run down to the deck – one fore and one aft on each side of the boat.

This configuration is called continuous rigging. We won’t go into the discontinuous rigging used on bigger boats in this guide, but if you are interested, you can read more about it here .

Shroud materials

Shrouds are usually made of 1 x 19 stainless steel wire. These wires are strong and relatively easy to install but are prone to stretch and corrosion to a certain degree. Another option is using stainless steel rods.

Rod rigging

Rod rigging has a stretch coefficient lower than wire but is more expensive and can be intricate to install. Alternatively, synthetic rigging is becoming more popular as it weighs less than wire and rods.

Synthetic rigging

Fibers like Dyneema and other aramids are lightweight and provide ultra-high tensile strength. However, they are expensive and much more vulnerable to chafing and UV damage than other options. In my opinion, they are best suited for racing and regatta-oriented sailboats.

Wire rigging

I recommend sticking to the classic 316-graded stainless steel wire rigging for cruising sailboats. It is also the most reasonable of the options. If you find yourself in trouble far from home, you are more likely to find replacement wire than another complex rigging type.

Relevant terms on sailboat rigging and hardware

The spreaders are the fins or wings that space the shrouds away from the mast. Most sailboats have at least one set, but some also have two or three. Once a vessel has more than three pairs of spreaders, we are probably talking about a big sailing yacht.

A turnbuckle is the fitting that connects the shrouds to the toggle and chainplate on the deck. These are adjustable, allowing you to tension the rig.

A chainplate is a metal plate bolted to a strong point on the deck or side of the hull. It is usually reinforced with a backing plate underneath to withstand the tension from the shrouds.

The term mast head should be distinct from the term masthead rigging. Out of context, the mast head is the top of the mast.

A toggle is a hardware fitting to connect the turnbuckles on the shrouds and the chainplate.

How tight should the standing rigging be?

It is essential to periodically check the tension of the standing rigging and make adjustments to ensure it is appropriately set. If the rig is too loose, it allows the mast to sway excessively, making the boat perform poorly.

You also risk applying a snatch load during a tack or a gybe which can damage the rig. On the other hand, if the standing rigging is too tight, it can strain the rig and the hull and lead to structural failure.

The standing rigging should be tightened enough to prevent the mast from bending sideways under any point of sail. If you can move the mast by pulling the cap shrouds by hand, the rigging is too loose and should be tensioned. Once the cap shrouds are tightened, follow up with the intermediates and finish with the lower shrouds. It is critical to tension the rig evenly on both sides.

The next you want to do is to take the boat out for a trip. Ensure that the mast isn’t bending over to the leeward side when you are sailing. A little movement in the leeward shrouds is normal, but they shouldn’t swing around. If the mast bends to the leeward side under load, the windward shrouds need to be tightened. Check the shrouds while sailing on both starboard and port tack.

Once the mast is in a column at any point of sail, your rigging should be tight and ready for action.

If you feel uncomfortable adjusting your rig, get a professional rigger to inspect and reset it.

How often should the standing rigging be replaced on a sailboat?

I asked the rigger who produced my new rig for Ellidah about how long I could expect my new rig to last, and he replied with the following:

The standing rigging should be replaced after 10 – 15 years, depending on how hard and often the boat has sailed. If it is well maintained and the vessel has sailed conservatively, it will probably last more than 20 years. However, corrosion or cracked strands indicate that the rig or parts are due for replacement regardless of age.

If you plan on doing extended offshore sailing and don’t know the age of your rig, I recommend replacing it even if it looks fine. This can be done without removing the mast from the boat while it is still in the water.

How much does it cost to replace the standing rigging?

The cost of replacing the standing rigging will vary greatly depending on the size of your boat and the location you get the job done. For my 41 feet sloop, I did most of the installation myself and paid approximately $4700 for the entire rig replacement.

Can Dyneema be used for standing rigging?

Dyneema is a durable synthetic fiber that can be used for standing rigging. Its low weight, and high tensile strength makes it especially popular amongst racers. Many cruisers also carry Dyneema onboard as spare parts for failing rigging.

How long does dyneema standing rigging last?

Dyneema rigging can outlast wire rigging if it doesn’t chafe on anything sharp. There are reports of Dyneema rigging lasting as long as 15 years, but manufacturers like Colligo claim their PVC shrink-wrapped lines should last 8 to 10 years. You can read more here .

Final words

Congratulations! By now, you should have a much better understanding of standing rigging on a sailboat. We’ve covered its purpose and its importance for performance and safety. While many types of rigs and variations exist, the hardware and concepts are often similar. Now it’s time to put your newfound knowledge into practice and set sail!

Or, if you’re not ready just yet, I recommend heading over to my following guide to learn more about running rigging on a sailboat.

Sharing is caring!

Skipper, Electrician and ROV Pilot

Robin is the founder and owner of Sailing Ellidah and has been living on his sailboat since 2019. He is currently on a journey to sail around the world and is passionate about writing his story and helpful content to inspire others who share his interest in sailing.

Very well written. Common sense layout with just enough photos and sketches. I enjoyed reading this article.

Thank you for the kind words.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Standing Rigging (or ‘Name That Stay’)

Published by rigworks on november 19, 2019.

Question: When your riggers talk about standing rigging, they often use terms I don’t recognize. Can you break it down for me?

From the Rigger: Let’s play ‘Name that Stay’…

Continuous

Forestay (1 or HS) – The forestay, or headstay, connects the mast to the front (bow) of the boat and keeps your mast from falling aft.

  • Your forestay can be full length (masthead to deck) or fractional (1/8 to 1/4 from the top of the mast to the deck).
  • Inner forestays, including staysail stays, solent stays and baby stays, connect to the mast below the main forestay and to the deck aft of the main forestay. Inner forestays allow you to hoist small inner headsails and/or provide additional stability to your rig.

Backstay (2 or BS) – The backstay runs from the mast to the back of the boat (transom) and is often adjustable to control forestay tension and the shape of the sails.

  • A backstay can be either continuous (direct from mast to transom) or it may split in the lower section (7) with “legs” that ‘V’ out to the edges of the transom.
  • Backstays often have hydraulic or manual tensioners built into them to increase forestay tension and bend the mast, which flattens your mainsail.
  • Running backstays can be removable, adjustable, and provide additional support and tuning usually on fractional rigs. They run to the outer edges of the transom and are adjusted with each tack. The windward running back is in tension and the leeward is eased so as not to interfere with the boom and sails.
  • Checkstays, useful on fractional rigs with bendy masts, are attached well below the backstay and provide aft tension to the mid panels of the mast to reduce mast bend and provide stabilization to reduce the mast from pumping.

Shrouds – Shrouds support the mast from side to side. Shrouds are either continuous or discontinuous .

Continuous rigging, common in production sailboats, means that each shroud (except the lowers) is a continuous piece of material that connects to the mast at some point, passes through the spreaders without terminating, and continues to the deck. There may be a number of continuous shrouds on your boat ( see Figure 1 ).

  • Cap shrouds (3) , sometimes called uppers, extend from masthead to the chainplates at the deck.
  • Intermediate shrouds (4) extend from mid-mast panel to deck.
  • Lower shrouds extend from below the spreader-base to the chainplates. Fore- (5) and Aft-Lowers (6) connect to the deck either forward or aft of the cap shroud.

Discontinuous rigging, common on high performance sailboats, is a series of shorter lengths that terminate in tip cups at each spreader. The diameter of the wire/rod can be reduced in the upper sections where loads are lighter, reducing overall weight. These independent sections are referred to as V# and D# ( see Figure 2 ). For example, V1 is the lowest vertical shroud that extends from the deck to the outer tip of the first spreader. D1 is the lowest diagonal shroud that extends from the deck to the mast at the base of the first spreader. The highest section that extends from the upper spreader to the mast head may be labeled either V# or D#.

A sailboat’s standing rigging is generally built from wire rope, rod, or occasionally a super-strong synthetic fibered rope such as Dyneema ® , carbon fiber, kevlar or PBO.

  • 1×19 316 grade stainless steel Wire Rope (1 group of 19 wires, very stiff with low stretch) is standard on most sailboats. Wire rope is sized/priced by its diameter which varies from boat to boat, 3/16” through 1/2″ being the most common range.
  • 1×19 Compact Strand or Dyform wire, a more expensive alternative, is used to increase strength, reduce stretch, and minimize diameter on high performance boats such as catamarans. It is also the best alternative when replacing rod with wire.
  • Rod rigging offers lower stretch, longer life expectancy, and higher breaking strength than wire. Unlike wire rope, rod is defined by its breaking strength, usually ranging from -10 to -40 (approx. 10k to 40k breaking strength), rather than diameter. So, for example, we refer to 7/16” wire (diameter) vs. -10 Rod (breaking strength).
  • Composite Rigging is a popular option for racing boats. It offers comparable breaking strengths to wire and rod with a significant reduction in weight and often lower stretch.

Are your eyes crossing yet? This is probably enough for now, but stay tuned for our next ‘Ask the Rigger’. We will continue this discussion with some of the fittings/connections/hardware associated with your standing rigging.

Related Posts

sailboat rigging parts names

Ask the Rigger

Do your masthead sheaves need replacing.

Question: My halyard is binding. What’s up? From the Rigger: Most boat owners do not climb their masts regularly, but our riggers spend a lot of time up there. And they often find badly damaged Read more…

sailboat rigging parts names

Selecting Rope – Length, Diameter, Type

Question: Do you have guidelines for selecting halyards, sheets, etc. for my sailboat? From the Rigger:  First, if your old rope served its purpose but needs replacing, we recommend duplicating it as closely as possible Read more…

sailboat rigging parts names

Spinlock Deckvest Maintenance

Question: What can I do to ensure that my Spinlock Deckvest is well-maintained and ready for the upcoming season? From the Rigger: We are so glad you asked! Deckvests need to be maintained so that Read more…

Parts of a sailboat

A Guide to the Different Parts of a Sailboat  

sailboat rigging parts names

Table of Contents

Last Updated on November 29, 2023 by Boatsetter Team

When you use Boatsetter, you have the opportunity to choose from a myriad of different  sailboat rentals  from all over the  United States and beyond . A sailboat is a perfect way to relax on the water, either on a solo adventure or on an excursion with friends and family.

When you rent a sailboat with Boatsetter, you will have the option to book a captained sailboat to enjoy your day out on the water or book bareboat to hone your sailing skills. Either way, you may be interested in the intricacies of a sailboat and its different parts. If this sounds like you, you have come to the right place. In this article, we go in-depth about the different parts of a sailboat so that you can be more knowledgeable about whatever boat you may choose and come away from reading this feeling more confident about the whole sailing experience.

A basic sailboat is composed of at least 12 parts: the hull , the keel , the rudder , the mast, the mainsail, the boom, the kicking strap (boom vang), the topping lift, the jib, the spinnaker, the genoa, the backstay, and the forestay. Read all the way through for the definition of each sailboat part and to know  how they work.

Explore sailboats for rent near you or wherever you want to go

boat hull

In short, the hull is the watertight body of the ship or boat. There are different types of hulls that a sailboat may have, and these different hulls will often affect the speed and stability of the boat.

Displacement Hulls

Most sailboats have  displacement hulls , like round bottom hulls, which move through the water by pushing water aside and are designed to cut through the water with very little propulsion. The reason these are called displacement hulls is that if you lower the boat into the water, some of the water moves out of the way to adjust for the boat, and if you could weigh the displayed water, you would find that it equals the weight of the boat, and that weight is the boat’s displacement. One thing to know about displacement hulls is that boats with these hulls are usually limited to slower speeds.

Planing Hull

Another type of hull is a planing hull. These hulls are designed to rise and glide on top of the water when enough power is supplied. When there is not enough power behind the boat, these boats often act as displacement hulls, such as when a boat is at rest. However, they climb to the surface of the water as they begin to move faster. Unlike the round bottom displacement hulls, these planing hulls will often have flat or v-shaped bottoms. These are very common with motor-driven water vessels, such as pontoon boats, but they can also be found on smaller sailboats which allow them to glide quickly over the water.

Finally, sailboats can differ depending on the number of hulls that they have. There are three options: monohulls (one hull), catamarans (two hulls), and trimarans (three hulls).

Monohulls , which have only a single hull, will usually be the typical round bottom displacement hull or occasionally the flat bottomed or v-shaped planning hull. Catamarans have two hulls with a deck or a trampoline in between, with the extra hulls providing increased stability. Finally, trimarans have three hulls — a main hull in the middle and two side hulls used for stability. These trimarans have gained popularity because of their excellent stability and ability to go at high speeds.

When evaluating a sailboat , it is important to pay attention to the type of hull that the boat has because the type of hull a sailboat has can drastically change the sailing experience, especially when it comes to stability and speed.

boat keel

All sailboats have a keel, a flat blade sticking down into the water from the sailboat’s hull bottom. It has several functions: it provides counterbalance, life, controls sideways movement, holds the boat’s ballast , and helps prevent the boat from capsizing. When a boat leans from one side to the other, the keel and its ballast counteract the movement and prevent the boat from completely tipping over.

As with hulls, there are a number of different types of keels, though the two most common types of keels on recreational sailboats are the full keel or the fin keel. A full keel is larger than a fin keel and is much more stable. The full keel is generally half or more of the length of the sailboat. However, it is much slower than the fin keel. A fin keel, which is smaller than the full keel, offers less water resistance and therefore affords higher speeds.

A more recent feature on sailboats is the “winged keel,” which is short and shallow but carries a lot of weight in two “wings” that run sideways from the keel’s main part. Another more recent invention in sailing is the concept of the canting keels, which are designed to move the weight at the bottom of the sailboat to the upwind side. This invention allows the boat to carry more sails.

The Rudder 

Boat rudder

A rudder is the primary control surface used to steer a sailboat. A rudder is a vertical blade that is either attached to the flat surface of the boat’s stern (the back of the boat) or under the boat. The rudder works by deflecting water flow. When the person steering the boat turns the rudder, the water strikes it with increased force on one side and decreased force on the other, turning the boat in the direction of lower pressure.

On most smaller sailboats, the helmsman — the person steering the boat — uses a “ tiller ” to turn the rudder. The “tiller” is a stick made of wood or some type of metal attached to the top of the rudder. However, larger boats will generally use a wheel to steer the rudder since it provides greater leverage for turning the rudder, necessary for larger boats’ weight and water resistance.

Boat mast

The mast of a sailboat is a tall vertical pole that supports the sails. Larger ships often have multiple masts. The different types of masts are as follows:

(1)  The Foremast  — This is the first mast near the bow (front) of the boat, and it is the mast that is before the mainmast.

(2)  The Mainmast  — This is the tallest mast, usually located near the ship’s center.

(3)  The Mizzen mast —  This is the third mast closest to the stern (back), immediately in the back of the mainmast. It is always shorter than the mainmast and is typically shorter than the foremast.

The Main Sail

Main Sail

The mainsail is the principal sail on a sailboat, and it is set on the backside of the mainmast. It is the main source that propels the boat windward.

boat boom

A boom is a spar (a pole made of wood or some other type of lightweight metal) along the bottom of a fore-and-aft rigged sail, which greatly improves the control of the angle and the shape of the sail, making it an indispensable tool for the navigation of the boat by controlling the sailes. The boom’s primary action is to keep the foot (bottom) of the sail flatter when the sail angle is away from the centerline of the sailboat.

The Kicking Strap (Boom Vang)

The boom vang is the line or piston system on a sailboat used to exert a downward force on the boom, enabling one to control the sail’s shape. The vang typically runs from the base of the mast to a point about a third of the way out the boom. It holds the boom down, enabling it to flatten the mainsail.

The Topping Lift

The topping lift is a line that is a part of the rigging on a sailboat, which applies an upward force on a spar (a pole) or a boom. Topping lifts are also used to hold a boom up when it’s sail is lowered. This line runs from the free end of the boom forward to the top of the mast. The line may run over a block at the top of the mast and down the deck to allow it to be adjusted.

boat jib

A jib is a triangular staysail set ahead of the foremost mast of a sailboat. Its tack is fixed to the bowsprit, the bow, or the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main types of headsails on modern boats.

The Spinnaker

Boat Spinnaker

A spinnaker is a type of sail designed specifically for sailing off the wind from a reaching downwind course. The spinnaker fills up with wind and balloons out in front of the sailboat when it is deployed. This maneuver is called “flying.” The spinnaker is constructed of very lightweight material, such a nylon fabric and on many sailing vessels, it is very brightly colored.

Another name for the spinnaker is the “chute” because it often resembles a parachute, both in the material it is constructed from and its appearance when it is full of wind.

People often use the term genoa and jib as if they were the same thing, but there is a marked difference between these two types of sails. A job is no larger than a foretriangle, the triangular area formed by the mast, the deck or bowsprit, and the forestay. On the other hand, a genoa is larger than the jib, with part of the sail going past the mast and overlapping the mainsail. These two sails, however, serve very similar purposes.

The Backstay

Boat Backstay 

The backstay is a standing rigging that runs from the mast to the transom (the vertical section at the back of the boat), counteracting the forestay and the jib. The backstay is an important sail trip, control and directly affects the mainsail’s shape and the headsail.

There are two general categories of backstays:

1) A permanent backstay is attached to the top of the mast and may or may not be readily adjustable.

2) A running backstay is attached about two-thirds up the mast and sometimes at multiple locations along the mast. Most modern sailboats will have a permanent backstay, and some will have permanent backstays combined with a running backstay.

The Forestay

Boat Forestay 

A forestay is a piece of standing rigging that keeps the mast from falling backward. It is attached at the very top of the mast, or at certain points near the top of the mast, with the other end of the forestay being attached to the bow (the front of the boat). Often a sail, such as a jib or a genoa, is attached to the forestay.

A forestay might be made from stainless steel wire, stainless steel rod or carbon rod, or galvanized wire or natural fibers.

Parts of a sail

Sails are vital for sailboats, made up of complex parts that improve performance and maneuverability. In this section, we’ll  take a closer look at the different parts of that make up the sails. 

Luff – The luff is a vertical sail part that maintains its shape and generates lift by interacting with the wind. It attaches securely with a bolt rope or luff tape for easy hoisting.

Leech – The leech controls air flow and reduces turbulence. Battens or leech lines are used to maintain shape and prevent fluttering.

Foot – The foot of a sail connects the luff and leech at the bottom edge. It helps define the sail’s shape and area. The outhaul is used to adjust its tension and shape.

Head – The sail’s head is where the luff and leech meet. It has a reinforced section for attaching the halyard to raise the sail.

Battens -The b attens are placed horizontally in sail pockets to maintain shape and optimize performance in varying wind conditions. They provide structural support from luff to leech.

Telltales – Sailors use telltales to adjust sail trim and ensure optimal performance.

Clew – The clew is important for shaping the sail and connecting the sheet, which regulates the angle and tension, producing energy. It’s located at the lower back corner of the sail.

Sailing is a favorite pastime for millions of Americans across the country. For some, there is nothing better than gliding across the water propelled by nothing more than the natural force of the wind alone. For both experienced and non-experienced sailors alike, Boatsetter is the perfect place to get your ideal sailboat rental from the mouthwatering Florida keys to the  crystal blue waters of the Caribbean .

Smaller sailing boats are perfect for a single day out on the water, either by yourself or with friends and family. In comparison, larger sailing boats and sailing yachts can allow you days of luxury on longer excursions full of adventure and luxury.

Whatever your sailing dreams are, it is always good to know, for both the experienced sailor and the novice, all about the sailboat’s different parts. In this article, we learned all about the boat’s hull, the keel, the rudder, the mast, the mainsail, the boom, the kicking strap (boom vang), the topping lift, the jib, the spinnaker, the genoa, the backstay, and the forestay, which make up the basic parts of any sailboat you might find yourself on.

About us  

Boatsetter is the go-to app for boat rentals and on-water experiences. Whatever the adventure, we’ve got a boat for that—Set sail , start the party , go yachting , make your trophy catch , and hone your watersports skills! Download the Boatsetter app ( App Store | Google Play ). Make sure to follow @boatsetter on Instagram, and tag us in all your boat day pictures for the chance to be featured.

Rent. List. Share—Only at Boatsetter

boatsetter loco

Boatsetter empowers people to explore with confidence by showing them a world of possibility on the water. Rent  a boat,  list  your boat, or become a  Boatsetter captain  today.

Browse by experience

sailboat rigging parts names

Explore articles

Best Air and Sea Shows.

5 Best Air and Sea Shows in the United States

boating apps

Your boat rental experience just got all techy (there's an app for that!)

summer destinations explored by boat - Boatsetter

10 Hidden Summer Destinations to Discover by Boat

Fun Boating Accessories.

10 Fun Boating Accessories for 2023

  • Types of Sailboats
  • Parts of a Sailboat
  • Cruising Boats
  • Small Sailboats
  • Design Basics
  • Sailboats under 30'
  • Sailboats 30'-35
  • Sailboats 35'-40'
  • Sailboats 40'-45'
  • Sailboats 45'-50'
  • Sailboats 50'-55'
  • Sailboats over 55'
  • Masts & Spars
  • Knots, Bends & Hitches
  • The 12v Energy Equation
  • Electronics & Instrumentation
  • Build Your Own Boat
  • Buying a Used Boat
  • Choosing Accessories
  • Living on a Boat
  • Cruising Offshore
  • Sailing in the Caribbean
  • Anchoring Skills
  • Sailing Authors & Their Writings
  • Mary's Journal
  • Nautical Terms
  • Cruising Sailboats for Sale
  • List your Boat for Sale Here!
  • Used Sailing Equipment for Sale
  • Sell Your Unwanted Gear
  • Sailing eBooks: Download them here!
  • Your Sailboats
  • Your Sailing Stories
  • Your Fishing Stories
  • Advertising
  • What's New?
  • Chartering a Sailboat

The Parts of a Sailboat (of which there are a great many!)

Some parts of a sailboat are very small and cheap, but are far from insignificant. Take the humble clevis pin for example; find one of these on the foredeck and you've cause to be concerned for the security of your rig!

If we were going to discuss all the parts of a sailboat here, it would be a very long article indeed - but relax, that's not going to happen. 

Let's make a start with...

The Parts of a Sailboat Above Deck

sailboat rigging parts names

Dacron is the usual choice of sailcloth for cruisers although laminated sails are becoming more common, and moulded sails are the first choice for racing sailors.

Read more about sails...

The Rigging

The standing rigging , generally made up in 1x19 stainless-steel wire,  supports the mast.

The forestay and backstay secure the mast in the fore-and-aft plane, and the shrouds secure it athwartships.

The ends of the stays and shrouds are secured to the structural elements of the hull via chainplates.

The standing rigging on a sailboat supports the mast.

The running rigging is the collective name for the lines (halyards, sheets, topping lifts, uphauls, downhauls etc) that control the sails. Their working ends are attached either directly to the sails or, in the case of the headsail, to the boom.

Read more about sailboat rigging...

These are the rigid struts, generally fabricated in alloy, wood or carbon fibre whose job it is to deploy the sails. For example:

  • The spinnaker pole;
  • The whisker pole;
  • The bowsprit;
  • The boomkin.

Read more about sailboat masts...

The Cockpit

Whitby 42 cockpit

Like many cruising boats, the Ted Brewer designed Whitby 42 ketch pictured above has a centre-cockpit, which allows for the provision of a sumptuous aft-cabin below. Nevertheless, aft-cockpit boats have a great following with seasoned cruisers too. So what the aft versus centre-cockpit pro's and con's?

Tillers and Wheels

Smaller boats tend to be tiller-steered while larger ones, as in the image above, have wheels. Tillers are attached directly to the rudder stock; wheels are located remotely and operate the tiller through chain or hydraulic linkage.

Each approach has their devotees, but what are the arguments for and against?

The Parts of a Sailboat Below the Waterline

Keels & rudders.

A Gallant 53 Ocean Cruising Sailboat

Keels provide three key attributes in varying amounts depending on their design : directional stability, ballast, and lift to windward.

Rudders provide steerage and a small contribution towards lift to windward. They are either:

  • Outboard or inboard rudders, which can be
  • Unbalanced, balanced or semi-balanced, and be
  • Keel-hung, skeg-hung, transom-hung or spade rudders.

Rudder types are discussed here...

Sailboat propeller arrangement

Driven by the boat's diesel engine, the propeller allows good progress to be made when the wind is not cooperating.

Under sail though the propeller is redundant and the fixed blades provide nothing but unwanted drag. This is greatly reduced if the blades can fold aft in a clamshell arrangement or feather in self-alignment with the water flow.  

Sailboat propellers are either 2 or 3-bladed - and you can read more about them here...

Below Decks

Sailboat interior accommodation

There's no 'standard' layout for the below-decks accommodation on a sailboat, although the one shown above is a popular choice.

Some layouts work well for offshore sailing whereas others are much less suitable - here's why some succeed where others fail...

Recent Articles

RSS

The Moody 54 Sailboat

Jun 29, 24 02:09 AM

The Brewer 44 Sailboat

Jun 28, 24 03:21 AM

Used Sailing Equipment For Sale

Jun 14, 24 03:54 AM

Here's where to:

  • Find  Used Sailboats for Sale...
  • Find Used Sailing Gear for Sale...
  • List your Sailboat for Sale...
  • List your Used Sailing Gear...

Our eBooks...

Collage of eBooks related to sailing

A few of our Most Popular Pages...

Boat anchoring technique

Copyright © 2024  Dick McClary  Sailboat-Cruising.com

Web Analytics

Sail Away Blog

Beginner’s Guide: How To Rig A Sailboat – Step By Step Tutorial

Alex Morgan

sailboat rigging parts names

Rigging a sailboat is a crucial process that ensures the proper setup and functioning of a sailboat’s various components. Understanding the process and components involved in rigging is essential for any sailor or boat enthusiast. In this article, we will provide a comprehensive guide on how to rig a sailboat.

Introduction to Rigging a Sailboat

Rigging a sailboat refers to the process of setting up the components that enable the sailboat to navigate through the water using wind power. This includes assembling and positioning various parts such as the mast, boom, standing rigging, running rigging, and sails.

Understanding the Components of a Sailboat Rigging

Before diving into the rigging process, it is important to have a good understanding of the key components involved. These components include:

The mast is the tall vertical spar that provides vertical support to the sails and holds them in place.

The boom is the horizontal spar that runs along the bottom edge of the sail and helps control the shape and position of the sail.

  • Standing Rigging:

Standing rigging consists of the wires and cables that support and stabilize the mast, keeping it upright.

  • Running Rigging:

Running rigging refers to the lines and ropes used to control the sails, such as halyards, sheets, and control lines.

Preparing to Rig a Sailboat

Before rigging a sailboat, there are a few important steps to take. These include:

  • Checking the Weather Conditions:

It is crucial to assess the weather conditions before rigging a sailboat. Unfavorable weather, such as high winds or storms, can make rigging unsafe.

  • Gathering the Necessary Tools and Equipment:

Make sure to have all the necessary tools and equipment readily available before starting the rigging process. This may include wrenches, hammers, tape, and other common tools.

  • Inspecting the Rigging Components:

In the upcoming sections of this article, we will provide a step-by-step guide on how to rig a sailboat, as well as important safety considerations and tips to keep in mind. By following these guidelines, you will be able to rig your sailboat correctly and safely, allowing for a smooth and enjoyable sailing experience.

Key takeaway:

  • Rigging a sailboat maximizes efficiency: Proper rigging allows for optimized sailing performance, ensuring the boat moves smoothly through the water.
  • Understanding sailboat rigging components: Familiarity with the various parts of a sailboat rigging, such as the mast, boom, and standing and running riggings, is essential for effective rigging setup.
  • Importance of safety in sailboat rigging: Ensuring safety is crucial during the rigging process, including wearing a personal flotation device, securing loose ends and lines, and being mindful of overhead power lines.

Get ready to set sail and dive into the fascinating world of sailboat rigging! We’ll embark on a journey to understand the various components that make up a sailboat’s rigging. From the majestic mast to the nimble boom , and the intricate standing rigging to the dynamic running rigging , we’ll explore the crucial elements that ensure smooth sailing. Not forgetting the magnificent sail, which catches the wind and propels us forward. So grab your sea legs and let’s uncover the secrets of sailboat rigging together.

Understanding the mast is crucial when rigging a sailboat. Here are the key components and steps to consider:

1. The mast supports the sails and rigging of the sailboat. It is made of aluminum or carbon fiber .

2. Before stepping the mast , ensure that the area is clear and the boat is stable. Have all necessary tools and equipment ready.

3. Inspect the mast for damage or wear. Check for corrosion , loose fittings , and cracks . Address any issues before proceeding.

4. To step the mast , carefully lift it into an upright position and insert the base into the mast step on the deck of the sailboat.

5. Secure the mast using the appropriate rigging and fasteners . Attach the standing rigging , such as shrouds and stays , to the mast and the boat’s hull .

Fact: The mast of a sailboat is designed to withstand wind resistance and the tension of the rigging for stability and safe sailing.

The boom is an essential part of sailboat rigging. It is a horizontal spar that stretches from the mast to the aft of the boat. Constructed with durable yet lightweight materials like aluminum or carbon fiber, the boom provides crucial support and has control over the shape and position of the sail. It is connected to the mast through a boom gooseneck , allowing it to pivot. One end of the boom is attached to the mainsail, while the other end is equipped with a boom vang or kicker, which manages the tension and angle of the boom. When the sail is raised, the boom is also lifted and positioned horizontally by using the topping lift or lazy jacks.

An incident serves as a warning that emphasizes the significance of properly securing the boom. In strong winds, an improperly fastened boom swung across the deck, resulting in damage to the boat and creating a safety hazard. This incident highlights the importance of correctly installing and securely fastening all rigging components, including the boom, to prevent accidents and damage.

3. Standing Rigging

When rigging a sailboat, the standing rigging plays a vital role in providing stability and support to the mast . It consists of several key components, including the mast itself, along with the shrouds , forestay , backstay , and intermediate shrouds .

The mast, a vertical pole , acts as the primary support structure for the sails and the standing rigging. Connected to the top of the mast are the shrouds , which are cables or wires that extend to the sides of the boat, providing essential lateral support .

The forestay is another vital piece of the standing rigging. It is a cable or wire that runs from the top of the mast to the bow of the boat, ensuring forward support . Similarly, the backstay , also a cable or wire, runs from the mast’s top to the stern of the boat, providing important backward support .

To further enhance the rig’s stability , intermediate shrouds are installed. These additional cables or wires are positioned between the main shrouds, as well as the forestay or backstay. They offer extra support , strengthening the standing rigging system.

Regular inspections of the standing rigging are essential to detect any signs of wear, such as fraying or corrosion . It is crucial to ensure that all connections within the rig are tight and secure, to uphold its integrity. Should any issues be identified, immediate attention must be given to prevent accidents or damage to the boat. Prioritizing safety is of utmost importance when rigging a sailboat, thereby necessitating proper maintenance of the standing rigging. This ensures a safe and enjoyable sailing experience.

Note: <p> tags have been kept intact.

4. Running Rigging

Running Rigging

When rigging a sailboat, the running rigging is essential for controlling the sails and adjusting their position. It is important to consider several aspects when dealing with the running rigging.

1. Choose the right rope: The running rigging typically consists of ropes with varying properties such as strength, stretch, and durability. Weather conditions and sailboat size should be considered when selecting the appropriate rope.

2. Inspect and maintain the running rigging: Regularly check for signs of wear, fraying, or damage. To ensure safety and efficiency, replace worn-out ropes.

3. Learn essential knot tying techniques: Having knowledge of knots like the bowline, cleat hitch, and reef knot is crucial for securing the running rigging and adjusting sails.

4. Understand different controls: The running rigging includes controls such as halyards, sheets, and control lines. Familiarize yourself with their functions and proper usage to effectively control sail position and tension.

5. Practice proper sail trimming: Adjusting the tension of the running rigging significantly affects sailboat performance. Mastering sail trimming techniques will help optimize sail shape and maximize speed.

By considering these factors and mastering running rigging techniques, you can enhance your sailing experience and ensure the safe operation of your sailboat.

The sail is the central component of sailboat rigging as it effectively harnesses the power of the wind to propel the boat.

When considering the sail, there are several key aspects to keep in mind:

– Material: Sails are typically constructed from durable and lightweight materials such as Dacron or polyester. These materials provide strength and resistance to various weather conditions.

– Shape: The shape of the sail plays a critical role in its overall performance. A well-shaped sail should have a smooth and aerodynamic profile, which allows for maximum efficiency in capturing wind power.

– Size: The size of the sail is determined by its sail area, which is measured in square feet or square meters. Larger sails have the ability to generate more power, but they require greater skill and experience to handle effectively.

– Reefing: Reefing is the process of reducing the sail’s size to adapt to strong winds. Sails equipped with reefing points allow sailors to decrease the sail area, providing better control in challenging weather conditions.

– Types: There are various types of sails, each specifically designed for different purposes. Common sail types include mainsails, jibs, genoas, spinnakers, and storm sails. Each type possesses its own unique characteristics and is utilized under specific wind conditions.

Understanding the sail and its characteristics is vital for sailors, as it directly influences the boat’s speed, maneuverability, and overall safety on the water.

Getting ready to rig a sailboat requires careful preparation and attention to detail. In this section, we’ll dive into the essential steps you need to take before setting sail. From checking the weather conditions to gathering the necessary tools and equipment, and inspecting the rigging components, we’ll ensure that you’re fully equipped to navigate the open waters with confidence. So, let’s get started on our journey to successfully rigging a sailboat!

1. Checking the Weather Conditions

Checking the weather conditions is crucial before rigging a sailboat for a safe and enjoyable sailing experience. Monitoring the wind speed is important in order to assess the ideal sailing conditions . By checking the wind speed forecast , you can determine if the wind is strong or light . Strong winds can make sailboat control difficult, while very light winds can result in slow progress.

Another important factor to consider is the wind direction . Assessing the wind direction is crucial for route planning and sail adjustment. Favorable wind direction helps propel the sailboat efficiently, making your sailing experience more enjoyable.

In addition to wind speed and direction, it is also important to consider weather patterns . Keep an eye out for impending storms or heavy rain. It is best to avoid sailing in severe weather conditions that may pose a safety risk. Safety should always be a top priority when venturing out on a sailboat.

Another aspect to consider is visibility . Ensure good visibility by checking for fog, haze, or any other conditions that may hinder navigation. Clear visibility is important for being aware of other boats and potential obstacles that may come your way.

Be aware of the local conditions . Take into account factors such as sea breezes, coastal influences, or tidal currents. These local factors greatly affect sailboat performance and safety. By considering all of these elements, you can have a successful and enjoyable sailing experience.

Here’s a true story to emphasize the importance of checking the weather conditions. One sunny afternoon, a group of friends decided to go sailing. Before heading out, they took the time to check the weather conditions. They noticed that the wind speed was expected to be around 10 knots, which was perfect for their sailboat. The wind direction was coming from the northwest, allowing for a pleasant upwind journey. With clear visibility and no approaching storms, they set out confidently, enjoying a smooth and exhilarating sail. This positive experience was made possible by their careful attention to checking the weather conditions beforehand.

2. Gathering the Necessary Tools and Equipment

To efficiently gather all of the necessary tools and equipment for rigging a sailboat, follow these simple steps:

  • First and foremost, carefully inspect your toolbox to ensure that you have all of the basic tools such as wrenches, screwdrivers, and pliers.
  • Make sure to check if you have a tape measure or ruler available as they are essential for precise measurements of ropes or cables.
  • Don’t forget to include a sharp knife or rope cutter in your arsenal as they will come in handy for cutting ropes or cables to the desired lengths.
  • Gather all the required rigging hardware including shackles, pulleys, cleats, and turnbuckles.
  • It is always prudent to check for spare ropes or cables in case replacements are needed during the rigging process.
  • If needed, consider having a sailing knife or marlinspike tool for splicing ropes or cables.
  • For rigging a larger sailboat, it is crucial to have a mast crane or hoist to assist with stepping the mast.
  • Ensure that you have a ladder or some other means of reaching higher parts of the sailboat, such as the top of the mast.

Once, during the preparation of rigging my sailboat, I had a moment of realization when I discovered that I had forgotten to bring a screwdriver . This unfortunate predicament occurred while I was in a remote location with no nearby stores. Being resourceful, I improvised by utilizing a multipurpose tool with a small knife blade, which served as a makeshift screwdriver. Although it was not the ideal solution, it allowed me to accomplish the task. Since that incident, I have learned the importance of double-checking my toolbox before commencing any rigging endeavor. This practice ensures that I have all of the necessary tools and equipment, preventing any unexpected surprises along the way.

3. Inspecting the Rigging Components

Inspecting the rigging components is essential for rigging a sailboat safely. Here is a step-by-step guide on inspecting the rigging components:

1. Visually inspect the mast, boom, and standing rigging for damage, such as corrosion, cracks, or loose fittings.

2. Check the tension of the standing rigging using a tension gauge. It should be within the recommended range from the manufacturer.

3. Examine the turnbuckles, clevis pins, and shackles for wear or deformation. Replace any damaged or worn-out hardware.

4. Inspect the running rigging, including halyards and sheets, for fraying, signs of wear, or weak spots. Replace any worn-out lines.

5. Check the sail for tears, wear, or missing hardware such as grommets or luff tape.

6. Pay attention to the connections between the standing rigging and the mast. Ensure secure connections without any loose or missing cotter pins or rigging screws.

7. Inspect all fittings, such as mast steps, spreader brackets, and tangs, to ensure they are securely fastened and in good condition.

8. Conduct a sea trial to assess the rigging’s performance and make necessary adjustments.

Regularly inspecting the rigging components is crucial for maintaining the sailboat’s rigging system’s integrity, ensuring safe sailing conditions, and preventing accidents or failures at sea.

Once, I went sailing on a friend’s boat without inspecting the rigging components beforehand. While at sea, a sudden gust of wind caused one of the shrouds to snap. Fortunately, no one was hurt, but we had to cut the sail loose and carefully return to the marina. This incident taught me the importance of inspecting the rigging components before sailing to avoid unforeseen dangers.

Step-by-Step Guide on How to Rig a Sailboat

Get ready to set sail with our step-by-step guide on rigging a sailboat ! We’ll take you through the process from start to finish, covering everything from stepping the mast to setting up the running rigging . Learn the essential techniques and tips for each sub-section, including attaching the standing rigging and installing the boom and sails . Whether you’re a seasoned sailor or a beginner, this guide will have you ready to navigate the open waters with confidence .

1. Stepping the Mast

To step the mast of a sailboat, follow these steps:

1. Prepare the mast: Position the mast near the base of the boat.

2. Attach the base plate: Securely fasten the base plate to the designated area on the boat.

3. Insert the mast step: Lower the mast step into the base plate and align it with the holes or slots.

4. Secure the mast step: Use fastening screws or bolts to fix the mast step in place.

5. Raise the mast: Lift the mast upright with the help of one or more crew members.

6. Align the mast: Adjust the mast so that it is straight and aligned with the boat’s centerline.

7. Attach the shrouds: Connect the shrouds to the upper section of the mast, ensuring proper tension.

8. Secure the forestay: Attach the forestay to the bow of the boat, ensuring it is securely fastened.

9. Final adjustments: Check the tension of the shrouds and forestay, making any necessary rigging adjustments.

Following these steps ensures that the mast is properly stepped and securely in place, allowing for a safe and efficient rigging process. Always prioritize safety precautions and follow manufacturer guidelines for your specific sailboat model.

2. Attaching the Standing Rigging

To attach the standing rigging on a sailboat, commence by preparing the essential tools and equipment, including wire cutters, crimping tools, and turnbuckles.

Next, carefully inspect the standing rigging components for any indications of wear or damage.

After inspection, fasten the bottom ends of the shrouds and stays to the chainplates on the deck.

Then, securely affix the top ends of the shrouds and stays to the mast using adjustable turnbuckles .

To ensure proper tension, adjust the turnbuckles accordingly until the mast is upright and centered.

Utilize a tension gauge to measure the tension in the standing rigging, aiming for around 15-20% of the breaking strength of the rigging wire.

Double-check all connections and fittings to verify their security and proper tightness.

It is crucial to regularly inspect the standing rigging for any signs of wear or fatigue and make any necessary adjustments or replacements.

By diligently following these steps, you can effectively attach the standing rigging on your sailboat, ensuring its stability and safety while on the water.

3. Installing the Boom and Sails

To successfully complete the installation of the boom and sails on a sailboat, follow these steps:

1. Begin by securely attaching the boom to the mast. Slide it into the gooseneck fitting and ensure it is firmly fastened using a boom vang or another appropriate mechanism.

2. Next, attach the main sail to the boom. Slide the luff of the sail into the mast track and securely fix it in place using sail slides or cars.

3. Connect the mainsheet to the boom. One end should be attached to the boom while the other end is connected to a block or cleat on the boat.

4. Proceed to attach the jib or genoa. Make sure to securely attach the hanks or furler line to the forestay to ensure stability.

5. Connect the jib sheets. One end of each jib sheet should be attached to the clew of the jib or genoa, while the other end is connected to a block or winch on the boat.

6. Before setting sail, it is essential to thoroughly inspect all lines and connections. Ensure that they are properly tensioned and that all connections are securely fastened.

During my own experience of installing the boom and sails on my sailboat, I unexpectedly encountered a strong gust of wind. As a result, the boom began swinging uncontrollably, requiring me to quickly secure it to prevent any damage. This particular incident served as a vital reminder of the significance of properly attaching and securing the boom, as well as the importance of being prepared for unforeseen weather conditions while rigging a sailboat.

4. Setting Up the Running Rigging

Setting up the running rigging on a sailboat involves several important steps. First, attach the halyard securely to the head of the sail. Then, connect the sheets to the clew of the sail. If necessary, make sure to secure the reefing lines . Attach the outhaul line to the clew of the sail and connect the downhaul line to the tack of the sail. It is crucial to ensure that all lines are properly cleated and organized. Take a moment to double-check the tension and alignment of each line. If you are using a roller furling system, carefully wrap the line around the furling drum and securely fasten it. Perform a thorough visual inspection of the running rigging to check for any signs of wear or damage. Properly setting up the running rigging is essential for safe and efficient sailing. It allows for precise control of the sail’s position and shape, ultimately optimizing the boat’s performance on the water.

Safety Considerations and Tips

When it comes to rigging a sailboat, safety should always be our top priority. In this section, we’ll explore essential safety considerations and share some valuable tips to ensure smooth sailing. From the importance of wearing a personal flotation device to securing loose ends and lines, and being cautious around overhead power lines, we’ll equip you with the knowledge and awareness needed for a safe and enjoyable sailing experience. So, let’s set sail and dive into the world of safety on the water!

1. Always Wear a Personal Flotation Device

When rigging a sailboat, it is crucial to prioritize safety and always wear a personal flotation device ( PFD ). Follow these steps to properly use a PFD:

  • Select the appropriate Coast Guard-approved PFD that fits your size and weight.
  • Put on the PFD correctly by placing your arms through the armholes and securing all the straps for a snug fit .
  • Adjust the PFD for comfort , ensuring it is neither too tight nor too loose, allowing freedom of movement and adequate buoyancy .
  • Regularly inspect the PFD for any signs of wear or damage, such as tears or broken straps, and replace any damaged PFDs immediately .
  • Always wear your PFD when on or near the water, even if you are a strong swimmer .

By always wearing a personal flotation device and following these steps, you will ensure your safety and reduce the risk of accidents while rigging a sailboat. Remember, prioritize safety when enjoying water activities.

2. Secure Loose Ends and Lines

Inspect lines and ropes for frayed or damaged areas. Secure loose ends and lines with knots or appropriate cleats or clamps. Ensure all lines are properly tensioned to prevent loosening during sailing. Double-check all connections and attachments for security. Use additional safety measures like extra knots or stopper knots to prevent line slippage.

To ensure a safe sailing experience , it is crucial to secure loose ends and lines properly . Neglecting this important step can lead to accidents or damage to the sailboat. By inspecting, securing, and tensioning lines , you can have peace of mind knowing that everything is in place. Replace or repair any compromised lines or ropes promptly. Securing loose ends and lines allows for worry-free sailing trips .

3. Be Mindful of Overhead Power Lines

When rigging a sailboat, it is crucial to be mindful of overhead power lines for safety. It is important to survey the area for power lines before rigging the sailboat. Maintain a safe distance of at least 10 feet from power lines. It is crucial to avoid hoisting tall masts or long antenna systems near power lines to prevent contact. Lower the mast and tall structures when passing under a power line to minimize the risk of contact. It is also essential to be cautious in areas where power lines run over the water and steer clear to prevent accidents.

A true story emphasizes the importance of being mindful of overhead power lines. In this case, a group of sailors disregarded safety precautions and their sailboat’s mast made contact with a low-hanging power line, resulting in a dangerous electrical shock. Fortunately, no serious injuries occurred, but it serves as a stark reminder of the need to be aware of power lines while rigging a sailboat.

Some Facts About How To Rig A Sailboat:

  • ✅ Small sailboat rigging projects can improve sailing performance and save money. (Source: stingysailor.com)
  • ✅ Rigging guides are available for small sailboats, providing instructions and tips for rigging. (Source: westcoastsailing.net)
  • ✅ Running rigging includes lines used to control and trim the sails, such as halyards and sheets. (Source: sailingellidah.com)
  • ✅ Hardware used in sailboat rigging includes winches, blocks, and furling systems. (Source: sailingellidah.com)
  • ✅ A step-by-step guide can help beginners rig a small sailboat for sailing. (Source: tripsavvy.com)

Frequently Asked Questions

1. how do i rig a small sailboat.

To rig a small sailboat, follow these steps: – Install or check the rudder, ensuring it is firmly attached. – Attach or check the tiller, the long steering arm mounted to the rudder. – Attach the jib halyard by connecting the halyard shackle to the head of the sail and the grommet in the tack to the bottom of the forestay. – Hank on the jib by attaching the hanks of the sail to the forestay one at a time. – Run the jib sheets by tying or shackling them to the clew of the sail and running them back to the cockpit. – Attach the mainsail by spreading it out and attaching the halyard shackle to the head of the sail. – Secure the tack, clew, and foot of the mainsail to the boom using various lines and mechanisms. – Insert the mainsail slugs into the mast groove, gradually raising the mainsail as the slugs are inserted. – Cleat the main halyard and lower the centerboard into the water. – Raise the jib by pulling down on the jib halyard and cleating it on the other side of the mast. – Tighten the mainsheet and one jibsheet to adjust the sails and start moving forward.

2. What are the different types of sailboat rigs?

Sailboat rigs can be classified into three main types: – Sloop rig: This rig has a single mast with a mainsail and a headsail, typically a jib or genoa. – Cutter rig: This rig has two headsails, a smaller jib or staysail closer to the mast, and a larger headsail, usually a genoa, forward of it, alongside a mainsail. – Ketch rig: This rig has two masts, with the main mast taller than the mizzen mast. It usually has a mainsail, headsail, and a mizzen sail. Each rig has distinct characteristics and is suitable for different sailing conditions and preferences.

3. What are the essential parts of a sailboat?

The essential parts of a sailboat include: – Mast: The tall vertical spar that supports the sails. – Boom: The horizontal spar connected to the mast, which extends outward and supports the foot of the mainsail. – Rudder: The underwater appendage that steers the boat. – Centerboard or keel: A retractable or fixed fin-like structure that provides stability and prevents sideways drift. – Sails: The fabric structures that capture the wind’s energy to propel the boat. – Running rigging: The lines or ropes used to control the sails and sailing equipment. – Standing rigging: The wires and cables that support the mast and reinforce the spars. These are the basic components necessary for the functioning of a sailboat.

4. What is a spinnaker halyard?

A spinnaker halyard is a line used to hoist and control a spinnaker sail. The spinnaker is a large, lightweight sail that is used for downwind sailing or reaching in moderate to strong winds. The halyard attaches to the head of the spinnaker and is used to raise it to the top of the mast. Once hoisted, the spinnaker halyard can be adjusted to control the tension and shape of the sail.

5. Why is it important to maintain and replace worn running rigging?

It is important to maintain and replace worn running rigging for several reasons: – Safety: Worn or damaged rigging can compromise the integrity and stability of the boat, posing a safety risk to both crew and vessel. – Performance: Worn rigging can affect the efficiency and performance of the sails, diminishing the boat’s speed and maneuverability. – Reliability: Aging or worn rigging is more prone to failure, which can lead to unexpected problems and breakdowns. Regular inspection and replacement of worn running rigging is essential to ensure the safe and efficient operation of a sailboat.

6. Where can I find sailboat rigging books or guides?

There are several sources where you can find sailboat rigging books or guides: – Online: Websites such as West Coast Sailing and Stingy Sailor offer downloadable rigging guides for different sailboat models. – Bookstores: Many bookstores carry a wide selection of boating and sailing books, including those specifically focused on sailboat rigging. – Sailing schools and clubs: Local sailing schools or yacht clubs often have resources available for learning about sailboat rigging. – Manufacturers: Some sailboat manufacturers, like Hobie Cat and RS Sailing, provide rigging guides for their specific sailboat models. Consulting these resources can provide valuable information and instructions for rigging your sailboat properly.

About the author

' data-src=

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Latest posts

The history of sailing – from ancient times to modern adventures

The history of sailing – from ancient times to modern adventures

History of Sailing Sailing is a time-honored tradition that has evolved over millennia, from its humble beginnings as a means of transportation to a beloved modern-day recreational activity. The history of sailing is a fascinating journey that spans cultures and centuries, rich in innovation and adventure. In this article, we’ll explore the remarkable evolution of…

Sailing Solo: Adventures and Challenges of Single-Handed Sailing

Sailing Solo: Adventures and Challenges of Single-Handed Sailing

Solo Sailing Sailing has always been a pursuit of freedom, adventure, and self-discovery. While sailing with a crew is a fantastic experience, there’s a unique allure to sailing solo – just you, the wind, and the open sea. Single-handed sailing, as it’s often called, is a journey of self-reliance, resilience, and the ultimate test of…

Sustainable Sailing: Eco-Friendly Practices on the boat

Sustainable Sailing: Eco-Friendly Practices on the boat

Eco Friendly Sailing Sailing is an exhilarating and timeless way to explore the beauty of the open water, but it’s important to remember that our oceans and environment need our protection. Sustainable sailing, which involves eco-friendly practices and mindful decision-making, allows sailors to enjoy their adventures while minimizing their impact on the environment. In this…

Vela Sailing Supply

Sailboat Hardware

Single Blocks

sailboat rigging parts names

Sailboat Parts Names: A Comprehensive Guide to Understanding the Components

by Emma Sullivan | Jul 19, 2023 | Sailboat Racing

sailboat rigging parts names

Short answer sailboat parts names:

Sailboat parts have various names that serve different functions. Some common sailboat parts include the mast, boom, rudder, keel, shroud, mainsail, jib sail, and winches. Each part plays a crucial role in maneuvering and controlling the sailboat during sailing.

Understanding Sailboat Parts Names: A Comprehensive Guide

If you are a sailing enthusiast or just starting out in this exciting watercraft sport, understanding the various names of sailboat parts is crucial. Just like any other specialized activity, sailing comes with its own language that can seem overwhelming to beginners. However, fear not! In this comprehensive guide, we will break down the key sailboat parts names while adding a touch of professionalism and wit along the way.

1. Hull: The hull is the main body of the sailboat. Think of it as the foundation upon which everything else is built. It helps support the weight and provides buoyancy in the water.

2. Deck: Placed on top of the hull, think of the deck as your mini oasis while out at sea. It’s where you’ll spend most of your time on board, either lounging or taking part in crucial activities.

3. Mast: Rising high above your deck, the mast holds your sails and allows you to harness wind power to propel your vessel forward gracefully. Picture it as your ship’s elegant backbone, bending and flexing with every gust.

4. Boom: Attached horizontally to the mast near its base, the boom keeps control over one end of your mainsail (we’ll get into more detail about sails later). While occasionally causing mild head bumps for taller sailors, it plays an essential role in adjusting sail shape and controlling overall boat balance.

5. Rudder: Ever wondered how you steer a sailboat? Look no further than the rudder! Mounted vertically below at the stern (the back) of your boat, it helps control direction by pivoting left or right when activated through a tiller or wheel mechanism – turning even novice sailors into masters of their course!

6. Tiller: Acting as a direct extension of both your arms and intentions, this lever-like device attaches to your rudder head enabling precise control over steering with a simple push or pull. Remember, it’s not just a stick; it’s your connection to the sea!

7. Sails: The true stars of the show! Sails capture the wind’s power and convert it into forward motion. Here are some key sail types:

– Mainsail: The grandest sail of them all, usually triangular in shape and attached to the mast and boom. It’s responsible for most of your propulsion.

– Jib: Positioned at the bow (the front) of your boat, this smaller triangular-shaped sail adds extra maneuverability by adjusting in size according to wind conditions.

– Spinnaker: A flamboyant addition to any sailboat crew, this colorful balloon-shaped sail is used when sailing downwind (with the wind behind you). It gives an extra boost of speed and flair!

8. Winches: Sailors are master multitaskers, and winches are their trusty sidekicks! These cylindrical devices help handle sheets (lines that control sails) by making it easier to apply necessary tension or release swiftly. A few turns could make all the difference between smooth sailing or fighting with unruly fabric.

9. Blocks and Pulleys: Sailboats rely on these ingenious mechanisms to redirect the force exerted on lines effectively. Blocks consist of one or more pulleys enclosed within a housing, enabling sailors to navigate complex rigging systems with ease—a true example of engineering marvel combined with practicality.

By familiarizing yourself with these sailboat parts names, you’ll soon be ready to embark on your maritime adventures with confidence! Remember, sailing may be a serious sport, but it’s also a thrilling experience full of adventurous tales waiting to unfold. Enjoy exploring the wonders of watercraft mastery while flaunting your newfound professional understanding – you’re officially on course towards becoming an accomplished sailor!

How to Identify and Learn Sailboat Parts Names: A Step-by-Step Tutorial

Have you ever found yourself aboard a sailboat and felt completely lost when it comes to understanding the various parts and their names? Don’t worry, you’re not alone! Many beginners struggle with this aspect of sailing, but fear not – we’re here to help.

In this step-by-step tutorial, we’ll guide you through the process of identifying and learning sailboat parts names. By the end of this guide, you’ll have a solid foundation in sailboat terminology, allowing you to confidently engage in conversations about sailing or navigate your own vessel. So, let’s get started!

Step 1: Start with the Basics To begin your sailboat part learning adventure, familiarize yourself with the fundamental components. First up is the hull – the body of the boat that keeps it afloat. You’ll also want to acquaint yourself with terms like bow (the front), stern (the back), port (the left side when facing forward) and starboard (the right side when facing forward).

Step 2: Mast and Rigging The mast is one of the most recognizable features on a sailboat. It’s a tall vertical pole that holds up the sails. When it comes to rigging, take note of crucial parts like shrouds (attached from mast top to gunwales for stability), stays (used for supporting mast fore-and-aft), halyards (ropes used for raising sails), and sheets (lines used for controlling sails’ position).

Step 3: Sails Array Now let’s focus on those magnificent sails! At this stage, learn to differentiate between main sails (largest ones attached to masts) and jib or genoa sails (smaller triangular ones farther toward bow). Pay attention to battens (stiffeners preventing flapping) and telltales (thin ribbons indicating wind direction).

Step 4: Dive into Deck Fittings Moving onto the deck, you’ll come across various fittings that serve essential purposes. Look out for winches (mechanical devices to handle sails), cleats (used for securing ropes), and blocks (pulleys guiding lines). Also, don’t forget to identify lifelines – cables preventing falling overboard.

Step 5: Navigational and Safety Equipment While not necessarily parts of the boat itself, navigational and safety equipment are critical components of sailboat knowledge. Familiarize yourself with instruments like compasses, GPS systems, depth sounders, radios, and life jackets. Understanding their names and functions will greatly contribute to your sailing prowess.

Step 6: Miscellaneous Parts Finally, be aware of a few miscellaneous parts that enhance sailing performance or convenience. These can include items such as boomvangs (controls for vertical movement of the boom), whisker poles (extendable poles holding jib or genoa in place), and winch handles (tools used to operate winches efficiently).

Congratulations! You’ve successfully completed our step-by-step tutorial on identifying and learning sailboat parts names. Remember, practice makes perfect – so spend time aboard different boats or join sailing communities to reinforce your newfound knowledge.

Learning sailboat part names may initially seem intimidating but breaking it down into manageable steps simplifies the process significantly. Now go forth with confidence, impress fellow sailors with your next-level expertise, and enjoy every moment spent exploring the open waters!

Frequently Asked Questions about Sailboat Parts Names Answered

Are you a sailing enthusiast but find yourself feeling puzzled or curious about the various names of sailboat parts? Whether you’re a beginner or an experienced sailor, understanding the terminology is essential for seamless communication and safe navigation. So let’s dive right into frequently asked questions about sailboat parts names and get all your queries answered!

1. What is the difference between a boom and a mast? The boom and mast are two vital components of a sailboat’s rigging system. The mast is a vertical structure that holds up the sails, providing height and stability to the boat. On the other hand, the boom is a horizontal pole attached to the lower part of the mast, serving as support for the foot (bottom edge) of the main sail.

2. What are jib and genoa? Jib and genoa are types of headsails used on sailboats. A jib is a smaller headsail positioned forward from the mast, aiding in steering and maneuverability at higher wind speeds. On the contrary, a genoa is larger than a jib, overlapping with the mainsail when fully deployed, boosting overall power during light wind conditions.

3. Explain halyards and sheets. Halyards and sheets play crucial roles in controlling sails on a sailboat. Halyards are ropes that lift or hoist sails up or down from their respective masts. For instance, there may be separate halyards for raising/lowering mainsail, jibs/genoas, or any additional foresails aboard.

On the other hand, sheets refer to ropes used to control how much wind fills in each individual sail via trimming or easing them – like adjusting reins on a horse! Mainsheet keeps tension on the main sail while controlling its angle relative to wind direction; similarly, jib/genoa sheets assist in setting optimal angles for those respective sails.

4. Can you explain what winches do? Winches are mechanical devices found on sailboats used to handle the loads and tensions associated with ropes, halyards, and sheets. Essentially, winches make it easier for sailors to control large or heavy sails by providing extra mechanical advantage. By cranking the winch handle, you can apply substantial force to haul in or ease out lines without excessive physical exertion.

5. What is a cleat used for? A cleat is a metal or wooden fitting mounted on a sailboat’s deck that helps secure ropes in place once they’ve been properly adjusted. Cleats have two small horns that allow the rope to be easily fastened while preventing accidental slippage. They are commonly used to secure halyards, sheets, or any other line needing temporary hold.

Now armed with this knowledge of sailboat parts names, you’ll be navigating nautical conversations with confidence! Remember, understanding these terms not only enhances your sailing experience but also promotes effective communication and ensures your safety on the water. So embark on your sailing adventures equipped with newfound wisdom about these frequently asked questions and set sail like a true sailor!

Exploring Essential Sailboat Parts Names for Beginners

If you’ve recently found yourself enamored by the idea of sailing and are considering venturing into this incredible world, you may be overwhelmed by the terminology and various parts that make up a sailboat. Fear not! In this blog post, we will explore essential sailboat part names so that beginners like you can familiarize themselves with the wonderful world of sailing.

1. Hull: Let’s begin our journey by discussing the most crucial part of any sailboat—the hull. The hull is the main body of the vessel, typically made from fiberglass or wood. It provides buoyancy and serves as a platform to carry all other components.

2. Mast: Rising high into the sky, the mast is perhaps one of the most iconic features of a sailboat. It is a tall vertical pole that supports and holds up the sails, acting as a crucial backbone for your vessel.

3. Sails: Now that we have mentioned them let’s dive deeper into these magnificent constructions that harness the power of wind to propel your boat forward. The four primary types include: – Mainsail: Attached to the mast and boom (which we’ll discuss next), it is usually triangular in shape and accounts for much of your boat’s forward propulsion. – Jib/Genoa: Located near the bow, it works in conjunction with the mainsail to help steer your boat while capturing additional wind power. – Spinnaker: This large balloon-like sail is used specifically for downwind sailing when you want an extra boost in speed. – Stay Sail: Situated between mast stays or on its own forestay, it offers versatility during different weather conditions.

4. Boom: Moving downward from the mast, we encounter another integral component—oh how oddly fitting this name sounds! The boom attaches horizontally at approximately mid-height on the mast and extends aft toward your stern (back end). Its purpose is to control and adjust tension in the mainsail.

5. Rigging: Complementing the mast and sails, rigging encompasses various cables, wires, and ropes that provide structural support and facilitate sail control. Common rigging parts include shrouds (supportive cables to maintain mast stability), forestay (forward cable that supports the mast’s forward movements), and aft stay (a backstay maintaining backward force on the mast).

6. Rudder: As with any vehicle or vessel, steering is essential for maneuverability. The rudder plays this vital role on a sailboat. Located beneath the waterline at the stern, it can pivot left or right to alter your vessel’s direction.

7. Tiller: Connected to the rudder, typically extending above decks, you’ll find the tiller—a long handle used to steer your sailboat by moving the rudder left or right.

8. Winches: Sailing requires physical effort—thankfully winches exist! These mechanical devices are used to apply tension to lines when hoisting or adjusting sails, making it easier for sailors to control their boat without superhuman strength.

9. Cleats: Securing lines onboard is simplified with cleats—metal or plastic fittings attached permanently to your boat where you can fasten ropes temporarily while sailing.

10. Pulpit & Pushpit: To ensure safety while cruising through open waters, sailboats have pulpit and pushpit railings at their bow and stern respectively – these prevent accidental falls overboard!

By familiarizing yourself with these essential sailboat part names as a beginner, you’re setting yourself up for success on your journey into sailing. So grab a sailing glossary if needed, soak up some knowledge, step aboard with confidence – and set sail into an exciting world of wind-powered adventure!

Master the Language of Sailing: Unraveling Sailboat Parts Names

Have you ever looked out onto the open waters and felt a sense of admiration and curiosity for the intricate beauty of sailboats? These vessels, with their elegant masts and billowing sails, have fascinated people for centuries. But as enchanting as they may be, sailing can sometimes feel like a language all its own. With terms like boom, gooseneck, and halyard being thrown around, it’s easy to feel overwhelmed by the jargon.

Fear not! In this blog post, we’re going to dive deep into the world of sailboat parts names and help you unravel this linguistic web. So grab your anchor (pun intended) and let’s set sail on this educational journey.

First things first – let’s start at the top (quite literally). The “mast” is arguably one of the most important components of a sailboat. It’s the vertical pole that holds up the sails and provides stability to the vessel. Picture it as the backbone of your boat – without it, your sails would be left drooping in defeat.

Moving down from the mast, we encounter an intriguing device called a “boom.” No, it doesn’t refer to something exploding or crashing into objects; instead, it’s a horizontal spar that extends from the bottom part of your mast. The boom plays an essential role in controlling the angle of your sail – much like how a conductor directs musicians in an orchestra.

Now that we’ve got our mast and boom sorted out, let’s focus on some other integral parts. One such component is known as a “gooseneck.” Contrary to what its name might suggest (no geese involved), this clever contraption attaches your boom to the mast using a swivel joint resembling – you guessed it – a goose neck. It allows for both vertical movement along with rotation so that your sail can follow wind shifts effortlessly.

Next up is another puzzling term: “halyard.” This refers to the line (a fancy sailor term for rope) that raises and lowers your sails. Think of it as the puppeteer’s string, guiding your sail’s movements with precision. Without a well-functioning halyard, you’d be left with nothing more than a majestic flag flapping aimlessly in the wind.

Now it’s time to delve into some nautical accessories that add both functionality and aesthetic appeal to your sailboat. One such feature is the “cleat.” Cleats are metal or plastic devices affixed to the boat’s deck where ropes can be secured. They act as handy anchors, ensuring that your lines remain taut and secure even in rough seas – much like how a squirrel holds onto its precious acorn during a gusty storm.

Last but not least, let’s introduce you to an essential piece of hardware: “winches.” These mechanical wonders provide a valuable hand for sailors when they need extra muscle power to hoist their sails. Winches consist of cylindrical drums around which ropes are wound, allowing for increased leverage during maneuvers. Think of them as your trusty personal trainer; without winches, hoisting large sails would feel like trying to bench press an elephant.

We hope this brief introduction helps lift the fog surrounding sailboat parts names and equips you with sailing terminology prowess. Remember, mastering this language takes practice and patience – just like learning any new skill. So next time you step aboard a sailboat, speak confidently about masts, booms, goosenecks, halyards, cleats, and winches!

Dive into the World of Sailing: All You Need to Know About Sailboat Parts Names

Sailing, with its timeless allure and sense of freedom, has captured the hearts of adventurers for centuries. Whether you dream of navigating vast oceans or peacefully cruising along a tranquil lake, understanding sailboat parts names is essential for any aspiring sailor. In this blog post, we’ll take you on a journey through the fascinating world of sailing, explaining the intricate details of sailboat parts names in a professional, witty, and clever manner.

First and foremost, let’s explore the majestic sails that propel these vessels through wind-powered magic. The mainsail stands tall at the heart of every sailboat, capturing the wind’s energy with grace and elegance. Its counterpart, known as the headsail or jib (sometimes also called foresail), dances delicately at the bow, complementing the mainsail’s power by catching additional gusts of wind from various angles.

Now brace yourself for some nautical terminology that will surely impress your friends during your next maritime adventure! The boom serves as an extended arm attached to the foot of the mainsail; it swings gracefully from side to side in response to wind shifts. This crucial component prevents unwanted accidental jibes but also adds an element of excitement when trimming those sails!

Speaking of trimming sails – enter stage left: sheets! No, we aren’t talking about bedding here. Sheets are ropes that control each individual sail and enable adjustments depending on wind strength and direction. Depending on their location on a boat, they have different names — main sheet controls the mainsail while jib sheets tame its smaller companion at the bow.

Prepare to immerse yourself further into this fascinating world as we explore even more intriguing sailboat parts names! Alongside our beloved sails reside battens – narrow strips placed inside certain types of sails like mainsails or mizzens – which help maintain their shape even under the mightiest gusts. Without them, we’d see uncontrolled flutters of fabric rather than beautifully shaped and functional sails.

The hull, arguably the heart and soul of any vessel, deserves our undivided attention. Can’t tell a bow from a stern? No worries – we’ve got you covered! The bow, also known as the front end of the boat with its sleek and pointed shape, cuts efficiently through water. Meanwhile, at the exact opposite end sits the stern – proudly displaying its squared-off design – determining direction through careful navigation.

But wait, fellow sailing enthusiasts! Before we conclude this enlightening journey through sailboat parts names, let’s not forget about some hidden heroes—blocks. These tiny yet powerful pulley systems redirect lines and distribute force to enable efficient sail trimming or hoisting maneuvers. Don’t underestimate their importance; they play a critical role in achieving optimal performance on your sailing escapades!

So there you have it: a detailed exploration into the enchanting world of sailboat parts names. Armed with this newfound knowledge, you’re ready to embark on your incredible adventure on open waters or serene lakes alike. Remember though, these descriptions only scratch the surface; there is still so much more to learn about each component’s functionality and significance.

As your sailing journey continues, keep expanding your nautical vocabulary – uncovering even more captivating terms like shrouds, halyards, and cleats. The beauty lies not only in mastering sailboat parts names but also in embracing the rich heritage and ever-evolving spirit of seafaring traditions.

May these insights inspire you to set sail on grand adventures while transforming yourself into an authority on all things sailing-related. Safely anchored within the mesmerizing world of sailing awaits endless opportunities for exploration and unforgettable experiences.

Bon voyage!

Recent Posts

Essential Tips

  • Sailboat Gear and Equipment
  • Sailboat Lifestyle
  • Sailboat Maintenance
  • Sailboat Racing
  • Sailboat Tips and Tricks
  • Sailboat Types
  • Sailing Adventures
  • Sailing Destinations
  • Sailing Safety
  • Sailing Techniques

Your First Sailing Site Icon

The simplest entrance to the world of sailing

Parts of a Sailboat – A Practical Overview

Main parts of a sailboat are explained for a Bermuda rigged sloop. This is the most widespread modern type of sailing boat and it is the boat type considered in this blog, as well as in Your First Sailing Handbook . For overview of other sailboat types and their classification see our post: Types of Sailboats .

The sloop normally sails with two sails: one mainsail and one foresail that is called a jib. Larger boats use an inboard engine, while smaller boats (usually shorter than 25 feet) may have an outboard engine. The engine drives the propeller providing thrust when sails are not used.

Parts of a Sailboat - Sails

A typical sloop is shown in the figures below. The front part of a boat is called the bow, while the rear part is called the stern. A cockpit is a working area, towards the stern of a boat, from which the boat is steered and controlled. A boat is steered by turning the tiller which results in turning the rudder, since these two are connected with a shaft. When the rudder is turned off the centerline it makes the boat turn left or right. On bigger boats a steering wheel is used instead of a tiller. Forestay, backstay and shrouds are steel wires or rods that support the mast (collectively called standing rigging).

Some important lines are drawn in various colors in the figures below (see the legend where colors tell you which line is which). Halyards and topping lift are led to the top of the mast, then down through the mast; they exit the mast near the deck and are then directed to the cockpit as shown in the figures. Similarly, outhaul is led from the rear end of the boom, through the boom towards the mast and then to the cockpit. The main halyard and outhaul are used to stretch the mainsail, while the jib halyard is used for hoisting the jib. The topping lift supports the boom when the mainsail is not hoisted and it is run in the same way as the main halyard.

Mainsheet and vang are used to control the boom and the mainsail during sailing. Traveler and jib car are adjustable blocks running along tracks, through which sheets (mainsheet and jib sheets) are attached to the deck. Jib sheets are used to control the jib during sailing. All the above mentioned lines are collectively called running rigging.

Remark: The term rig comprises mast, boom, sails and rigging (both standing and running). A Bermuda rigged sloop may have different rig configurations.

Parts of a Sailboat - Side and Rear View

All the lines running from the mast to the cockpit are led through the system of blocks and then through rope clutches, so that they can be put on the winches. Each line has its own clutch and each clutch has two positions: opened and closed. When the clutch is opened, the line can move freely in both directions. When the clutch is closed, the line can be pulled in only one direction (towards the cockpit), while the other direction is blocked. For example, pulling a halyard from the cockpit results in a sail being hoisted (a clutch is normally closed). To lower a sail, halyard must be eased (a clutch must be opened).

Winches facilitate tightening of the lines when they are under tension. Lines must always be put on the winch in the clockwise direction with a suitable number of turns. The stronger the force on the line, the more turns should be put on the winch. When the tension in the line becomes too strong to be pulled by hand, a handle is used.

Winches can be standard or self-tailing. They are both operated in the same way, except when using a handle. In this case, standard winches are best operated by two persons, i.e. one is tailing (pulling the free end of the line) while the other is turning the handle. On the other hand, self-tailing winches allow simple one-person operation, since they have self-tailing jaws. After the line has been put in these jaws, it is tailed automatically as the handle is being turned.

Standard Winch

Vedran Bobanac

' src=

Vedran Bobanac has been sailing since the age of 10, while he has been working as a skipper and as a sailing instructor for almost 20 years now. He also holds PhD degree in electrical engineering and he enjoys using his technical knowledge, as well as pedagogical skills to teach sailing and publish sailing handbooks .

(001) 401-739-1140 -- (001) 401-739-1149 ---

Rigging - Turnbuckles , Toggles , Wire & Rod Components, Norseman Cones & Fittings.

Furling Systems - Systems and replacement parts from a variety of Manufacturers.

Traveller Systems - Adjustable Track Systems for Mainsheet and other applications.

Sailboat Hardware - Rope Clutches, Blocks, Track & Fittings, Winches, etc.

Custom Parts - Custom items, or those out of production or otherwise unavailable.

Consultation - Special projects, research, or information not detailed on-site.

Copyright   1996 - 2024,  Rig-Rite, Inc.        Disclaimer          Web Site maintained by The WATER Group

parts of a sailboat

Parts of a Sailboat: The Definitive Guide

Sailing is a sport that has a lot of terms that may sound like a foreign language. Port, Starboard, beam, stern, bow, etc. Some of these terms, you might have heard of before, but many of them will be new to you.

Below Are Some Of The Most Basic Parts Of A Sailboat:

Below I have discussed some most basic parts of a sailboat that are found common in almost all kinds of sailboats.

Port side – This is the left side of the boat when viewed from the back of the boat looking forward.

Starboard side – This is the right side of the boat when viewed from the back of the boat looking forward.

Stern – This is the rear of the boat.

Bow – This is the front of the boat.

Beam – This is the widest point of the boat.

LOA – Length Overall – Length of the boat at its longest point. Most of the time, the boat is longer above the water than it is at the waterline and below.

Cockpit – This is the part of the boat where the crew sits when riding in the boat. This is usually in the rear of the boat but could be in the center, depending on the style of the boat.

Rudder – Located below the waterline and connected to the stern of the boat, this is used to make the boat turn. It is connected to either a steering wheel or a tiller. When the rudder is turned from side to side, it changes the angle that the water flows under the boat. This change in the direction of the water flow is what makes the boat turn.

Tiller – This is usually a wooden lever or arm that is connected to the rudder and allows you to turn the boat.

parts of a sailboat with detailed labelling

Helm – This is the area of the boat where the person who is piloting the boat is either sitting or standing.

Helmsman – The person that is piloting the boat and at the helm.

Steering wheel – This is connected to the rudder via cables or pulleys and is used in place of a tiller to steer the boat.

Hull – This is the entire body of the boat.

Deck – This is the flat surface on the top of the boat.

Keel – This is a fin connected to the bottom of the sailboat. The keel is weighted and provides a counterbalance to the sail and the wind blowing against the sail. Without this keel, the boat would tip over when the wind blew against it. The keel comes in many shapes and sizes and does several other important things to allow you to sail better, these will be covered in other posts.

Bow Pulpit – This is the metal tubing that surrounds the bow (front) of the boat.

Stern Pulpit – The metal tubing that surrounds the stern (rear) of the boat.

Lifeline – A wire cable running from the bow pulpit to the stern pulpit and connected to the deck in several different locations. This is a safety feature designed to keep people from falling off the deck of a sailboat.

Stanchions – Two-foot tall metal tubing that is used to connect the lifeline to the deck.

Some Specific Parts of a Sailboat

For this next part, I am going to talk about what is above the deck, the rigging. The rig includes the sails, the supporting cables, and everything that controls all of this. These are the parts of a sailboat that make it a sailboat and not just a mere boat.

Everything we went over, prior to this, had fairly normal, easy-to-remember names. Now we are going to learn about some more complicated sounding parts of a sailboat. Even though the names are complicated, it is stuff that you will use every time you sail, so it will be easy to remember. Ready? Great, let’s learn more!

parts of a sailboat with proper naming

Mast – This is the main part of the sailboat that makes it look like a sailboat and also pretty much everything else is attached to it.

Boom – The horizontal beam that extends out from the mast towards the stern (rear) of the boat.

Standing Rigging – In order for the mast and the boom to remain upright, something has to hold it up. This is what the standing rigging does. Many of the cables that you see on a sailboat are only there to help hold the mast up.

Shrouds – These are the cables that run down the port (left) and starboard (right) side of the mast. These keep the mast from falling to the left or right. They are attached to the deck on the sides of the boat. Sometimes there are upper and lower shrouds, depending on the height of the mast.

Spreaders – These are attached to the mast about halfway down and push the shrouds out further than they would be if they were attached straight down to the deck. This provides a more effective angle of support for the shroud.

Chainplates – These are plates on the deck that provide a great anchor for the shrouds, and stays, to attach too. Without these, it would be hard to attach a cable to the deck and it not get ripped out.

Backstay – This is a wire cable that runs from the top of the mast to the stern (rear) of the boat. This keeps the mast from falling forward.

Forestay (aka Headstay) – This is a wire cable that runs from the top of the mast to the bow (front) of the boat. This keeps the mast from falling backward.

parts of a sailboat diagram

Mainsail – This is the large sail that is attached to the mast and the boom. This sail is usually the first sail raised and does the majority of the work when sailing.

Batten – These are either plastic, wood, or possibly fiberglass. They are inserted into pockets on the mainsail and are used to help shape the sail. We will discuss why the shape of the sail is important in another post.

Jib – This is a sail that is attached to the forestay (head stay). There are many different sizes of sails that can go on this forestay, depending on the type of sailing being done or the weather. This sail is a very important sail and is used almost as much as the mainsail.

Roller Furling Drum – This is a tube that fits over the forestay and one end of the jib is inserted inside it. This gives the sailor the ability to roll up the jib and wrap it around the forestay for storage. This is the easiest way to store the job when not in use. Some newer masts are actually using a similar system for the mainsail, but that is only for the newer boats.

Gooseneck – This is a turnbuckle that attaches the boom to the mast. The boom is not attached in a fixed manner, it uses this buckle to allow it to move around and be somewhat flexible. The problem with this is that it also allows the boom to be pulled up when the sail is full.

Boom Vang – This is a series of pulleys and ropes that are used to hold the boom down when the sail is full. This helps the gooseneck be flexible without allowing the boom to just fold up.

Boom Topping Lift – This is a wire cable that runs from the top of the mast all the way down the mainsail to the boom. It attaches to the end of the boom and keeps the boom from falling down. So the Boom Vang keeps the boom from going up and the Topping Lift keeps the boom from falling down.

Now you know a lot more about the rigging used on a sailboat. You can see that these terms are strange for a novice sailor to learn, but trust me, you get used to them, it just takes practice. There are more parts, but I want to go over those parts in more detail in other posts.

I know I was overloaded when I first went to training and wished I had spent more time learning these terms. Sailing class is much more fun when you can learn to sail and not have to worry about what they are talking about!

Do you have more to add about the parts of a sailboat or do you have a question about this post? Please leave a comment and make this post even better and more educational.

Related Posts

different kinds of sailboats

Nevertheless it was not until 2008 that the group received approval to refurbish and develop the resort. Greta Horst Boynton

Save my name, email, and website in this browser for the next time I comment.

Jimmy Green Marine

Currency: GBP

  • Worldwide Delivery

Mooring Warps and Mooring Lines

  • LIROS 3 Strand Polyester Mooring Warps
  • LIROS Green Wave 3 Strand Mooring Warps
  • LIROS Braided Dockline Mooring Warps
  • LIROS Handy Elastic Mooring Warps
  • Marlow Blue Ocean Dockline
  • LIROS Super Yacht Mooring Polyester Docklines
  • 50 metre / 100 metre Rates - Mooring

Mooring Accessories

  • Mooring Compensators

Mooring Strops and Bridles

  • V shape Mooring Bridles
  • Y shape Mooring Bridles
  • Small Boat and RIB Mooring Strops
  • Mooring Strops
  • Mooring Strops with Chain Centre Section

Mooring Assistance

  • Coastline Bow Thruster Accessories
  • Max Power Bow Thrusters
  • Bonomi Mooring Cleats
  • Majoni Fenders
  • Polyform Norway Fenders
  • Ocean Inflatable Fenders
  • Dock Fenders
  • Fender Ropes and Accessories

Mooring Components

  • Mooring Swivels
  • Mooring Shackles
  • Mooring Cleats and Fairleads
  • Mooring Buoys

Mooring Information

  • Mooring Warps Size Guide
  • Mooring Lines - LIROS Recommended Diameters
  • Mooring Rope Selection Guide
  • Mooring Warp Length and Configuration Guide
  • How to estimate the length of a single line Mooring Strop
  • Mooring Ropes - Break Load Chart
  • Mooring Compensator Advisory
  • Rope Cockling Information
  • Fender Size Guide
  • Majoni Fender Guide
  • Polyform Norway Fender Inflation Guide
  • More Article and Guides >

Anchor Warps Spliced to Chain

  • LIROS 3 Strand Nylon Spliced to Chain
  • LIROS Anchorplait Nylon Spliced to Chain

Anchor Warps

  • LIROS Anchorplait Nylon Anchor Warps
  • LIROS 3 Strand Nylon Anchor Warps
  • Leaded Anchor Warp
  • Drogue Warps and Bridles
  • 50 / 100 metre Rates - Anchoring
  • Aluminium Anchors
  • Galvanised Anchors
  • Stainless Steel Anchors

Calibrated Anchor Chain

  • Cromox G6 Stainless Steel Chain
  • G4 Calibrated Stainless Steel Anchor Chain
  • Lofrans Grade 40
  • MF DAMS Grade 70
  • MF Grade 40
  • Titan Grade 43
  • Lewmar Windlasses
  • Lofrans Windlasses
  • Maxwell Windlasses
  • Quick Windlasses
  • Windlass Accessories and Spares

Chain Snubbers

  • Chain Hooks, Grabs and Grippers
  • Chain Snubbing Bridles
  • Chain Snubbing Strops

Anchoring Accessories

  • Anchor Connectors
  • Anchor Trip Hooks and Rings
  • Anchoring Shackles
  • Bow Rollers and Fittings
  • Chain and Anchor Stoppers
  • Chain Links and Markers

Anchoring Information

  • How To Choose A Main Anchor
  • Anchoring System Assessment
  • Anchor Chain and Rope Size Guide
  • The Jimmy Green Guide to the Best Anchor Ropes
  • What Size Anchor Do I Need?
  • Anchor to Chain Connection Guide
  • How to Choose Your Anchor Chain
  • How to Establish the Correct Anchor Chain Calibration?
  • Calibrated Anchor Chain - General Information
  • Calibrated Anchor Chain Quality Control
  • Calibrated Chain - Break Load and Weight Guide
  • Galvanising - Managing Performance and Endurance expectation
  • Can Galvanised Steel be used with Stainless Steel?
  • Windlass Selection Guide
  • More Articles and Guides

Stainless Steel Wire Rigging and Wire Rope

  • 1x19 Wire Rigging
  • 50 / 100 metre Rates - Wire and Fibre
  • 7x19 Flexible Wire Rigging
  • Compacted Strand Wire Rigging

Dinghy Rigging

  • Stainless Steel Dinghy Rigging
  • Dinghy Rigging Fittings

Fibre Rigging

  • LIROS D-Pro Static Rigging
  • LIROS D-Pro-XTR Fibre Rigging
  • DynIce Dux Fibre Rigging
  • Fibre Rigging Fittings

Wire Terminals

  • Cones, Formers, Wedges, Ferrules, Rigging Spares
  • Hi-Mod Swageless Terminals
  • Sta-Lok Swageless Terminals
  • Swage Terminals

Wire Rigging Fittings

  • Turnbuckle Components

Rigging Accessories

  • Rigging Chafe Protection
  • Headsail Reefing Furlers
  • Plastimo Jib Reefing
  • Selden Furlex Reefing Gear

Furling Systems

  • Anti-torsion Stays
  • Straight Luff Furlers
  • Top Down Furlers

Guard Wires, Rails and Fittings

  • Guard Rail Fittings
  • Guard Rails in Fibre and Webbing
  • Guard Wire Accessories
  • Guard Wires

Standing Rigging Assistance

  • Replacing your Furling Line
  • Fibre Rigging Break Load Comparison Guide
  • More Articles and Guides >
  • Cruising Halyards
  • Performance Halyards
  • Dinghy Halyards

Rigging Shackles

  • Captive and Key Pin Shackles
  • hamma™ Snap Shackles
  • Soft Shackles
  • Standard Snap Shackles
  • Wichard Snap Shackles

Classic Ropes

  • Classic Control Lines
  • Classic Halyards
  • Classic Sheets
  • Cruising Sheets
  • Performance Sheets
  • Dinghy Sheets

Sail Handling

  • Boom Brakes and Preventers
  • Lazy Jack Sail Handling
  • Rodkickers, Boomstruts
  • Sail Handling Accessories

50 / 100 metre Rates - Running Rigging

  • 50 / 100 metres - Cruising Ropes
  • 50 / 100 metres - Dinghy Ropes
  • 50 / 100 metres - Performance Ropes

Control Lines

  • Cruising Control Lines
  • Performance Control Lines
  • Dinghy Control Lines
  • Continuous Control Lines

Running Rigging Accessories

  • Anti-Chafe Rope Protection
  • Lashing, Lacing and Lanyards
  • Mast and Boom Fittings
  • Rope Stowage
  • Sail Ties and Sail Stowage
  • Shock Cord and Fittings
  • LIROS Ropes
  • Marlow Ropes

Running Rigging Resources

  • Running Rigging Rope Fibres and Construction Explained
  • How to Select a Suitable Halyard Rope
  • How to select Sheets and Guys
  • Dyneema Rope - Cruising and Racing Comparison
  • Dinghy Rope Selection Guide
  • Rope Measurement Information
  • Running Rigging - LIROS Recommended Line Diameters
  • Running Rigging Break Load Comparison Chart
  • Colour Coding for Running Rigging
  • Selecting the right type of block, plain, roller or ball bearing
  • Recycling Rope

Running Rigging Glossary

Plain bearing blocks.

  • Barton Blocks
  • Harken Element Blocks
  • Low Friction Rings
  • Selden Yacht Blocks
  • Wichard MXEvo Blocks
  • Wooden Yacht Blocks

Control Systems

  • Ratchet Blocks
  • Stanchion Blocks and Fairleads
  • Snatch Blocks
  • Genoa Car Systems
  • Traveller Systems
  • Block and Tackle Purchase Systems

Ball Bearing Blocks

  • Harken Ball Bearing Blocks
  • Selden Ball Bearing Blocks

Roller Bearing Blocks

  • Harken Black Magic Blocks
  • Selden Roller Bearing Blocks

Deck Fittings

  • Bungs and Hatches
  • Bushes and Fairleads
  • Deck Eyes, Straps and Hooks
  • Pad Eyes, U Bolts and Eye Bolts
  • Pintles and Gudgeons
  • Tiller Extensions and Joints
  • Harken Winches, Handles and Accessories
  • Barton Winches, Snubbers and Winchers
  • Lewmar Winches, Handles and Accessories
  • Winch Servicing and Accessories

Clutches and Organisers

  • Barton Clutches and Organisers
  • Spinlock Clutches and Organisers
  • Lewmar Clutches
  • Harken Ball Bearing Cam Cleats
  • Barton K Cam Cleats

Deck Hardware Support

  • Blocks and Pulleys Selection Guide
  • Barton High Load Eyes
  • Dyneema Low Friction Rings Comparison
  • Seldén Block Selection Guide
  • Barton Track Selection Guide
  • Barton Traveller Systems Selection Guide
  • Harken Winch Selection Guide
  • Karver Winch Comparison Chart
  • Lewmar Winch Selection Guide - PDF
  • Winch Servicing Guide

Sailing Flags

  • Courtesy Flags
  • Red Ensigns
  • Blue Ensigns
  • Signal Code Flags
  • Flag Staffs and Sockets
  • Flag Accessories
  • Flag Making and Repair
  • Webbing only
  • Webbing Soft Shackles
  • Webbing Restraint Straps
  • Webbing Sail Ties
  • Sail Sewing
  • PROtect Tape

Fixings and Fastenings

  • Screws, Bolts, Nuts and Washers
  • Monel Rivets

Hatches and Portlights

  • Lewmar Hatches
  • Lewmar Portlights
  • Fids and Tools
  • Knives and Scissors

General Chandlery

  • Carabiners and Hooks
  • Antifouling

Flag Articles

  • Flag Size Guide
  • Bending and Hoisting Methods for Sailing Flags
  • Courtesy Flags Identification, Labelling and Stowage
  • Courtesy Flag Map
  • Flag Etiquette and Information
  • Glossary of Flag Terms and Parts of a Flag
  • Making and Repairing Flags
  • Signal Code Message Definitions

Other Chandlery Articles

  • Anchorplait Splicing Instructions
  • Antifoul Coverage Information
  • Hawk Wind Indicator Selection Guide
  • Petersen Stainless - Upset Forging Information
  • Speedy Stitcher Sewing Instructions
  • Thimble Dimensions and Compatible Shackles

Jackstays and Jacklines

  • Webbing Jackstays
  • Stainless Steel Wire Jackstay Lifelines
  • Fibre Jackstay Lifelines
  • Jackstay and Lifeline Accessories

Lifejackets

  • Crewsaver Lifejackets
  • Seago Lifejackets
  • Spinlock Lifejackets
  • Children's Life Jackets
  • Buoyancy Aids

Floating Rope

  • LIROS Multifilament White Polypropylene
  • LIROS Yellow Floating Safety Rope

Guard Wires, Guardrails and Guardrail Webbing

Lifejacket accessories.

  • Lifejacket Lights
  • Lifejacket Rearming Kits
  • Lifejacket Spray Hoods
  • Safety Lines

Seago Liferafts

  • Grab Bag Contents
  • Grab Bags and Polybottles
  • Liferaft Accessories
  • Danbuoy Accessories
  • Jimmy Green Danbuoys
  • Jonbuoy Danbuoys
  • Seago Danbuoys

Overboard Recovery

  • Lifebuoy Accessories
  • Purchase Systems
  • Slings and Throwlines

Safety Accessories

  • Fire Safety
  • Sea Anchors and Drogues

Safety Resources

  • Guard Wires - Inspection and Replacement Guidance
  • Guard Wire Stud Terminal Dimensions
  • Webbing Jackstays Guidance
  • Webbing Jackstays - Custom Build Instructions
  • Danbuoy Selection Guide
  • Danbuoy Instructions - 3 piece Telescopic - Offshore
  • Liferaft Selection Guide
  • Liferaft Servicing
  • Man Overboard Equipment - World Sailing Compliance
  • Marine Safety Information Links
  • Safety Marine Equipment List for UK Pleasure Vessels

Sailing Clothing

  • Sailing Jackets
  • Sailing Trousers
  • Thermal Layers

Leisure Wear

  • Accessories
  • Rain Jackets
  • Sweatshirts

Sailing Footwear

  • Dinghy Boots and Shoes
  • Sailing Wellies

Leisure Footwear

  • Walking Shoes

Sailing Accessories

  • Sailing Bags and Holdalls
  • Sailing Gloves
  • Sailing Kneepads

Clothing Clearance

Clothing guide.

  • What to wear Sailing
  • Helly Hansen Mens Jacket and Pant Size Guide
  • Helly Hansen Womens Sailing Jacket and Pant Size Guide
  • Lazy Jacks Mens and Womens Size Charts
  • Musto Men's and Women's Size Charts
  • Old Guys Rule Size Guide
  • Sailing Gloves Size Guides
  • Weird Fish Clothing Size Charts

The Jimmy Green Clothing Store

Lower Fore St, Beer, East Devon, EX12 3EG

  • Adria Bandiere
  • Anchor Marine
  • Anchor Right
  • August Race
  • Barton Marine
  • Blue Performance
  • Brierley Lifting
  • Brook International
  • Brookes & Adams
  • Captain Currey
  • Chaineries Limousines
  • Coastline Technology
  • Colligo Marine
  • Cyclops Marine
  • Douglas Marine
  • Ecoworks Marine
  • Exposure OLAS
  • Fire Safety Stick
  • Fortress Marine Anchors
  • Hawk Marine Products
  • Helly Hansen
  • International
  • Jimmy Green Marine
  • Maillon Rapide
  • Mantus Marine
  • Marling Leek
  • Meridian Zero
  • MF Catenificio
  • Ocean Fenders
  • Ocean Safety
  • Old Guys Rule
  • Petersen Stainless
  • Polyform Norway
  • PSP Marine Tape
  • Sidermarine
  • Stewart Manufacturing Inc
  • Team McLube
  • Technical Marine Supplies
  • Titan Marine (CMP)
  • Ultramarine
  • Waterline Design
  • William Hackett

Clearance August Race Boat Cleaning Kit £26.00

Clearance LIROS Racer Dyneema £55.08

Clearance Folding Stock Anchor £123.25

Clearance LIROS Herkules £0.00

Clearance Barton Size 0 Ball Bearing Blocks - 5mm £0.00

Clearance Marlow Blue Ocean® Doublebraid £18.48

Mooring Clearance

Anchoring clearance, standing rigging clearance, running rigging clearance, deck hardware clearance, chandlery clearance, safety clearance, sailboat rigging can be divided in to 2 categories:.

Standing Rigging - the wires and ropes that hold up the mast, also known as shrouds or stays.

Running Rigging - the ropes (and wires) that control the sails on a yacht.

There are a large number of different terms that cover the use for which each rope is employed.

The most common generic terms are sheets and halyards.

Normally attached to the clew of the sail and control the shape and angle to the wind - each individual sheet is identified by the name of the sail as a prefix e.g. Jib sheets, genoa sheets, yankee sheets, staysail sheets, code zero sheets, gennaker sheets, cruising chute sheets, mainsheets, mizzen sheets - where these are a pair, they may also be classified as port or starboard. Spinnaker Sheets are used in conjunction with Spinnaker Guys and a spinnaker pole to control the shape of the spinnaker on either gybe.

Attached to the head of a sail and used to haul a sail up the mast - in the same way as sheets, each halyard is identified by the name of the sail as a prefix e.g. main halyard.

Sheets and halyards are part of a more generic category: Control Lines or a little more obscurely, Preventers. Control Lines include sheets and halyards and all the other ropes and wires that contribute to the efficient mangement of a yacht's sail area. A rope that stops an accidental gybe is commonly referred to as a preventer. However, most of the ropes that comprise a yacht's running rigging can be described as preventers i.e. a rope that is preventing something or control lines i.e. a rope that is controlling something.

Control Lines:

Tack Line - attached to the tack of a sail to make the length of the luff adjustable - common on loose footed reaching/running headsails e.g. gennakers but also used on more traditional rigs e.g. dipping lugsails

In Hauler or Tweaker - attached to a headsail (jib/genoa/yankee/code zero) sheet and used to bring the angle of the lead nearer to the centreline than the normal setting.

Barber Hauler - attached to a headsail sheet and used to create more downward pressure and generally from a point further outboard than the normal fairlead setting.

Downhaul or Cunningham - attached to the tack of a mainsail and used to create tension in the luff.

Kicker or Vang - diagonal line or purchase system (block and tackle) from base of mast to a point on the underside of the boom - used to create downward tension on the boom and subsequently the leach of the sail.

Outhaul - generally attached to the clew of a mainsail to adjust the foot tension.

Reefing Line or Reefing Pennant - Lines reeved through the boom and the mainsail to facilitate a reduction in mainsail area.

Lazyjack Line - used for guiding and controlling the mainsail as it is dropped.

Running Backstays or Checkstays - adjustable version of the backstay, generally consisting of a very low stretch standing part (single line) attached to a purchase system for adjusting the tension.

Preventer - line deployed to prevent the mainsail boom from accidentally gybing or control the speed of the boom's transition during a gybe.

Sailboats Explained

Sailboats have many parts and esoteric names, but when you break it down, it isn't all that complicated. Here, we'll make it simple for you by doing just that.

Keel basics

All types explained, best keel for you, explore topics, sailboat types, sailboat parts.

sailboat rigging parts names

There are dozens of different sailboat types, all with different names and characteristics. Generally, a sailboat name refers to the sail plan, but not always. We've written a quick guide with real-world examples of 17 different sailboat types and how to recognize them to get you started.

More on sailboat types

sailboat rigging parts names

What Are the Fastest Types of Sailboat (and Why)?

sailboat rigging parts names

When you first get into sailing, there are a lot of sailboat parts to learn. Scouting for a good guide to all the parts, I couldn't find any, so I wrote one myself.

In this guide, I'll go over each different sailboat part. And I mean each and every one of them. I'll walk you through them one by one, and explain each part's function. I've also made sure to add good illustrations and clear diagrams.

Sailboats consist of four main segments

The hull is the sailboats' body, which is in contact with the water. The masts hold up the sails , while the rigging attaches the sails to the mast.

sailboat rigging parts names

There's a lot to know about sailboat keels, how they function, the different types and their properties, and so on. That's why we've created this detailed cluster to walk you through everything there is to know about sailboat keels. It will link to all different articles on the topic and make it easy to find the exact information you're looking for.

More on keels

sailboat rigging parts names

Sailboat Keel Types: Illustrated Guide (Bilge, Fin, Full)

What is a sailboat keel and how does it work.

sailboat rigging parts names

Different sail shapes and types are used for different purposes. There are sails for storms and high winds, as well as low wind conditions, like the spinnaker and gennaker. Recognizing the different sail types is the first step to mastering your sailboat's course, handling, and speed.

sailboat rigging parts names

Closely related to sail types are rig types. Rigging is the way the sails are attached to the boat. This means that rigging envelops the mast layout, lines and halyards, and also influences the sails' shapes, and which types will be available to you. We've set out to create a single guide with good diagrams that will give you the complete overview in one read.

sailboat rigging parts names

The hull is the body shape of the boat: the part that floats in or on top of the water surface and provides the boat's buoyancy. While most sailboats use the same hull design, there are many different types, all with different properties. The type of hull affects your boat's performance, handling, stability, and safety. We've created a comprehensive guide that will walk you through all the types, while giving examples of boats using each different hull design.

Latest about Sailboat types

Latest about keels, all sailboats explained articles.

sailboat rigging parts names

What's the Steering Wheel On A Ship Called?

sailboat rigging parts names

What's a Sailboat With Two Hulls Called? (3 Examples)

sailboat rigging parts names

What Is A Boat With 2 Masts Called? (5 Options)

sailboat rigging parts names

Can You Sail a 420 Single-Handed?

sailboat rigging parts names

How To Figure Out How Shallow Your Boat Can Go

sailboat rigging parts names

Small Sailboat Types: Choose the Perfect One For You

sailboat rigging parts names

How Long Does It Take to Build a Sailboat? (DIY vs. Shipyard)

sailboat rigging parts names

The Best Sailboats for Rough Sea Conditions (13 Examples)

sailboat rigging parts names

What's the Best Size of Sailboat for Coastal Cruising?

sailboat rigging parts names

Can a Catamaran Capsize? The Surprising Answer

sailboat rigging parts names

13 Best Beginner Sailboats with Cabin (For Any Budget)

sailboat rigging parts names

Are Catamarans Safer than Monohulls? - Not Always

sailboat rigging parts names

Catamaran vs Monohull in Rough Seas: Which is Better?

Untitled

My Cruiser Life Magazine

Illustrated Guide to Sailboat Parts [Updated 2023]

The lingo of sailing is baffling to many newcomers. While the actual sailing is pretty easy, it’s hard to wrap your mind around the bookwork when it seems like every little thing on a boat goes by its own nautical term. 

Here are a few names for parts of a sailboat that you might not have thought about before. For even more nautical word play, check out our complete guide to sailing terms .

sailboat parts

Parts of Sailboat Hulls

The boat’s hull is its main body. Most are made of fiberglass, but there are a few aluminum sailboat models out there too. Wood is more traditional but more difficult to maintain than these modern alternatives. Sailboat hulls are displacement hulls, which means they sit low in the water and move relatively slowly. The hull’s job is to displace water, so you stay afloat!

Bow The forward “pointy end” of the boat.

Stern The rear end of the boat.

Transom If the stern of a boat has a flat section, it is called the transom. (I wrote about it in detail here: What Is the Transom on a Boat )

Canoe Stern or Double-Ender Some boats lack a transom; instead, their stern comes to a point like a bow. This is a “double ender” or a canoe stern.

Port and Starboard Sides Port is the left side, and starboard is the right side. 

Freeboard This is the height of the sides of the boat above the water.

Deck The upper portion of the boat that you walk on. 

Sheer Sheer is the curve of the deck when viewed from the side. Some boats have none, and some boats have a lot. 

Cabin Coach Roof Most sailboats have a raised coach roof on top of the cabin area.

Bottom of a Sailboat – Keels and Things

There are tons of parts on a sailboat that you only ever see if it’s out of the water. Boats are hauled out at boatyards by giant cranes, or a special machine called a travel lift . 

Keel The boat’s keel is the underwater feature that counters the effects of wind pressure on the sails. It keeps the boat from tipping over, but it also keeps the boat going in a straight line as it moves through the water. If a boat has no keel, the wind will push it downwind. 

A keel is heavy–it is weighted with thousands of pounds of ballast (usually lead). So when someone refers to a “keelboat,” they mean that it is a big boat with a weighted keel built for cruising. The built-in weight of a keel keeps the boat from capsizing. Also, the water flow over the curved surface of the keel helps the boat sail into the wind.

Smaller boats with centerboards or daggerboards are on the opposite end of the spectrum from keelboats. These aren’t weighted and could tip over (capsize) in the wrong conditions.

Types of Keels

Full Keel A classic and time-tested design, full keel boats are favorites among passage-making and ocean-crossing cruisers. They’re stable and comfortable at sea and very safe. However, they have a reputation for being slow compared to more modern designs.

Modified Full Keel The modification is a cut-away forefoot. That means it looks like a full keel, but there isn’t as much keel up near the bow. This reduces the underwater “wetted surface area” and makes the design a little bit faster while preserving the other good things about full keel designs.

Fin Keel The fin keel looks like a shark’s fin pointed downward. Some are narrow and very deep, while others are longer and shallow. Fin keels are bolted to the bottom of an otherwise flat-looking hull design. The fin has a foil shape that creates a lifting force as water flows over it. In addition to its ballasted weight, this opposes the sails and leeway. Most modern sailboats have some version of a fin keel.

Bulb Keel The ballast should be placed as low as possible to lower the boat’s center of gravity. The bulb keel is a fin keel with a lead bulb added to the bottom. The bulb has an efficient shape, making it more efficient than just the fin alone.

Wing Keel Like a bulb, a wing keel works by adding more weight and hydrodynamic force to the bottom of the keel. As a result, the wings look like a little airplane mounted on the bottom of a fin keel. 

Swing Keel A swing keel is a fin that pivots up and into the boat, meaning that you can have a very shallow draft when you are docking or anchoring but also a very deep draft when you are sailing in open waters. This heavy keel requires a powerful and complicated electric or hydraulic-electric system. 

Lifting Keel A lifting keel is similar to a swing keel, only the keel lifts up into the hull vertically. 

Bilge Keels A bilge keel boat has two fin keels mounted at 45-degree angles below the hull. The advantage is that the boat can “dry out.” This makes them very popular in harbors around England, where the massive tidal range means that the harbor is only mud for half the day. 

Centerboard Centerboards look like swing keels, but the “keel” part is just a board. It isn’t weighted with lead or iron, so it doesn’t change the ballast of the boat any. They are often found on smaller sailboats like sailing dinghies, but there are also large cruising boats that have full keels or long-fin keels with centerboards, too. 

Daggerboard A daggerboard is like a centerboard, only it doesn’t swing. Instead, it goes straight up and down like a dagger into its sheath. They’re not only common on very small sailing dinghies but also large cruising catamarans.

Canting Keel Canting keels are some of the latest technology items in racing, so they aren’t found on cruising boats yet. They move from side to side, allowing the crew to precisely control the forces made by the keel.

Types of Rudders – What Steers a Sailboat

As with keels, you’ll see various types of rudders on sailboats. The rudder is one of the most critical parts of a sailboat’s equipment, so the differences in rudders are mostly about how protected it is from damage.

Rudder The rudder is the thing that steers the sailboat. It’s mounted on the back of the boat, sometimes looking a bit like a second keel. When the operator turns the steering wheel or tiller, it moves the rudder one way or the other. That, in turn, turns the yacht’s bow left or right. 

Transom-Hung Rudder The most basic type of rudder is hung on the transom. It’s usually controlled with a tiller instead of a wheel. You can see a transom-hung rudder above the water.

Keel-Mounted Rudder On a full keel boat, the rudder will be mounted on the back edge of the keel. This protects it completely from damage since anything the boat might hit will hit the keel first. 

Skeg-Mounted Rudder The rudder might be mounted to a skeg if a boat has a fin keel. A skeg is a small fixed surface that holds the rudder and supports it. In the case of a full skeg, it also protects the rudder as a full keel would.

Spade Rudder Spade rudders have no skeg, so the entire underwater surface moves when you turn the wheel. Most modern yachts have spade rudders because they are incredibly effective. They are easily damaged, however, which is why some offshore sailors still prefer skeg-hung rudders.

Bottom of Sail Boat – Running Gear

Running gear is the generic name given to all equipment under the boat that connects to the engine and moves the boat under power. It consists of the propeller, prop shaft, and supports. 

Propeller Also called the prop or screw, the prop is what converts the engine power into thrust. The water flow over its blades creates a pushing force that moves the boat. Since the sailboat doesn’t use the propeller when it is sailing, sailboats often have folding or feathering props that stop moving.

Prop Shaft The metal shaft that connects the engine to the propeller is called the prop shaft. 

Cutlass Bearing Where the prop shaft exits the hull, a rubber cutlass bearing keeps it centered and rotating freely. 

Saildrive A saildrive is a common arrangement on modern sailboats that uses a vertical drive leg with the propeller. The saildrive installs on the back of the engine and includes the transmission. It’s like the lower unit of an outboard motor, but you cannot raise it out of the water. 

Up Top – Types of Sailboat Designs

Aft Cockpit The “classic” design of the modern sailboat, if there is such a thing, is called the aft cockpit. This layout has the cockpit in the rear-most section of the hull, behind the cabin.

Center Cockpit The center cockpit sailboat has the cockpit closer to the mast. That leaves a lot of space in the rear of the hull for a huge stateroom. This design means that the cockpit will be closer to the boat’s center, making handling easier. But it is also higher, making more windage and motion at sea. 

Pilot House A pilot house sailboat has a second helm inside a protected area. These are popular in colder climates, where the pilot house provides a warm place to steer the boat from. The rear cockpit is usually smaller than a typical aft cockpit, but it’s still where the sail handling occurs. A pilot house has a raised level, so the salon typically surrounds the interior helm to utilize that space and visibility when not underway.

Deck Salon Like a pilot house, a deck salon has big windows and better visibility than a typical sailboat cabin. But it lacks a true interior helm. Many, however, have nav stations with forward visibility and autopilot controls, making it a comfortable place to sit and keep watch during a passage. 

Flush Deck Most sailboats have a raised coach roof where the interior cabin is. But some designers make their decks flush with the sides of the boat, making a wide open deck that is easy to move around on. 

parts of a sailboat

On Deck Sailboat Components – Sailboat Front

The deck of a sailboat is all about safety at sea. Most modern cruising boats are rigged such that there are few things you might need to go “out on deck” or “go forward” for. Instead, these things are rigged back to the cockpit, so you can stay safe and dry while doing your thing.

Since the wet pitching deck of a sailboat at sea is tricky, many of the things you’ll find there are safety-related.

Handholds Places to grab should be located all over the boat, so there’s never a risk of not having something to hold onto to stabilize yourself.

Lifelines Lifelines run the perimeter of the boat and provide a last-ditch safety device. You can grab them, and they should be high enough that they’ll keep you from going overboard. 

Stantions The stands that lifelines attach to.

Bow Pulpit The solid rail around the front of the boat provides a safe handhold and a starting point for the lifelines.

Stern Pushpit The same, but on the stern of the boat.

Bulwarks The raised edges of the deck on the sides so that you can’t slip overboard on accident.

No-Skid Decks In areas where people will be walking, the deck is treated with a special product to make the deck “no-skid.” That way, it isn’t slippery, even when wet.

Harness Sailing harnesses are designed to clip onto the boat and keep a sailor onboard even if the boat takes a huge wave or the sailor slips. The harness is the staple of offshore safety. 

Jack Lines Jack lines are temporary lines secured on the deck where sailors can attach their harnesses. 

Safety Rails Many boats also have extra rails and handholds located in spots where sailors might work on deck, like around the base of the mast.

At the bow of the sailboat, you’ll find her ground tackle.

Bowsprit The bowsprit is the spar that extends from the deck forward of the bow. They’re used on sailboats to gain more sail area since getting the sail farther forward means you can fit a bigger sail. Some have just a spar, while others have a bow platform that is part of the deck.

Ground Tackle  The generic word for the anchor, chain, and all the equipment needed to use it.

Anchor The anchor is “the hook” that digs into the seabed and keeps the boat in the same place. Anchors are safety devices since they allow you to stop in shallow water. But they also provide access to areas with no marinas since you can anchor offshore and go in on your dinghy. 

Windlass A winch that pulls up the anchor and chain. They can be manual, with a handle, or electric, with a button.

Anchor Rode The generic name for the anchor line. It can be a chain or rope.

Snubber A short length of rope that attaches to the chain to secure it to the boat. 

Cleat A horn-shaped piece of deck hardware used to secure a line or rope. 

Dorade A large vent opening on the deck of a boat which is designed to let air in but not water.

Hatch Hatches are upward-facing windows that you can open to increase ventilation in the cabin.

Locker A generic term for a cabinet or compartment on a boat. 

Going Aloft – Basic Boat Parts of a Sailing Rig

The rig of a boat is the mast and all of its associated parts. If you’re wondering about the many different kinds of rigs that are out there, check out our rundown on sailing terms . There you’ll find definitions for boats with just one mast or multiple masts, like sloop rig and what a boat with two sails in front might be called. It’s a cutter, if you’re wondering.

Spar A generic name for a mast, boom, or any other long pole used to hold a sail. It can be wood or metal or vertical or horizontal. 

Mast A vertical spar upon which a sail is hoisted.

Boom A horizontal pole that holds a sail and gives it shape. 

Standing Rigging The wires or rope that holds the mast upright. 

Stay Standing rigging that goes fore to aft. The head stay runs from the masthead to the bow, and the backstay runs from the masthead to the stern.

Shroud Standing rigging that goes to the sides of the boat. From the masthead to each side runs a cap shroud. Some masts also have intermediate and lower shrouds.

Running Rigging All lines that are used for sail handling are called running rigging. 

Halyard A halyard hoists a sail to the top. Each halyard is named for the sail it hoists, i.e., main halyard, jib halyard, spinnaker halyard.

Sheet The sheet controls the sail. If you ease the sheet, the sail is loosened. If you winch the sheet in, it is tightened. Like all running rigging, each sheet is named for the sail it controls, i.e., main sheet, jib sheet, etc.

Traveler If a sail has a boom, the traveler can be used to adjust it from side to side. The sheet is attached to the traveler. Most main sail travelers are located near or in the cockpit.

Gooseneck Fitting The articulating attachment that holds a boom on a mast.

Topping Lift A line that holds the rear end of a boom up. It runs from the masthead to the boom. 

Vang A control line pulls the boom down and puts pressure on the sail to keep it flatter. Large boats may have hydraulic or solid vangs.

Blocks The rest of the world would call this a pulley, but sailors call it a block.

Fairleads Deck organizers that keep the lines tidy and running in the direction they should go on deck.

Furler Wraps the sail around the stay so that it doesn’t not have to be raised and lowered each time. Instead, you pull on the sheet and the sail unrolls or “unfurls.”

On Deck – Back of Sailboat

On most boats, the cockpit is located at the back. 

Cockpit The main operations center and party central on a sailboat. This is where the skipper sits at the helm, and the linesmen control the sheets.

Coaming The cockpit is protected from waves and splashes by the coaming, the tall walls that enclose it. It also makes the cockpit safe since you are unlikely to get swept overboard from here.

Lazarette The main storage locker in the cockpit.

Helm The station where the skipper steers the boat from. 

Tiller If a boat doesn’t have a wheel, it will have a tiller. A tiller is just a handle connected to the rudder, and the skipper pushes or pulls it to steer. Even if a boat has a wheel, it probably has an emergency tiller in case the steering system breaks.

Winch Winches provide a mechanical advantage to make it easier to haul in lines. In the cockpit, all the sheets have winches.

Rope Clutch A clutch locks a rope in place so it can be taken off a winch, even when loaded.

Jammer A jammer does the same as a clutch, but it’s a simpler device found on smaller boats.

Weathervane Steering A weathervane is used to steer the boat like an autopilot but uses wind direction and mechanical linkages. As a result, they use no power and never complain about their workload. They mount on the stern of the boat and are controlled by simple lines to the cockpit. Windvanes are often referred to by their brand name, i.e., Monitor or Hydrovane

Davits Arms on the back of the boat that lift the dinghy or tender. 

Swim Platform A flat area on the transom that allows you easy access in and out of the water. A standard feature on newer boats but not on older ones that just had long swim ladders.

Catamaran Sailboat Parts Explained

For the most part, the components of a catamaran share the same terms and labels that they would on a monohull. Cats often have a few extra features with other names, however.

Hulls A catamaran is made with two hulls connected together. Each hull has an interior, just like a monohull sailboat does. The cabins and heads are usually located in the hulls, and sometimes the galley is also down below.

Owner’s Version A catamaran layout that is made for private owners. Usually, one hull will be dedicated to the owner’s stateroom with a private door, a huge head with a walk-in shower, and a large berth.

Charter Version It has more staterooms and heads than an owner’s version does. Usually, a charter cat has at least two staterooms and heads in each hull.

Bridge Deck The deck connects the two hulls, which usually has the salon and cockpit. If the design is “galley up,” the galley will be on the bridgedeck with the salon.

Cockpit Just like on a monohull, the cockpit is the operations center. But catamarans have huge cockpits, and there is usually a large outdoor dining table and entertainment area as well.

Forward Cockpit Some designs have lounge seating forward of the salon on the bridgedeck.

Flybridge Some designs have the main helm mounted on top of the salon on an upper level. It’s almost the catamaran equivalent of a center cockpit.

Trampolines Forward of the salon, the bridge deck stops, and a trampoline connects the hulls over the water. This is a great place to hang out, but it’s an integral safety feature for a catamaran. The trampolines allow any water to immediately drain away, not weighing the boat down on the bow. This prevents a pitchpole when a boat capsizes by tipping forward into the water.

Cross Beam and Dolphin Striker Since there is no center bow to mount the head stay and foresail, catamarans use a cross beam that connects the hull. A piece of rigging keeps this in place, and it’s called the dolphin striker. No dolphins were hurt in the rigging of these boats, however.

Anchor Bridle Instead of a single snubber line on the anchor, catamarans use a wide bridle that connects each hull bow to the anchor line.

Parts of a Sail Boat FAQs

What are parts of a sailboat called.

Sailing is a challenging hobby, and one reason it’s so difficult for beginners is because every part of a sailboat has its own name. From each wire and rope to every piece of deck hardware, a beginner must learn the basics before they can even start.

What is the front part of a sailboat called?

The front part of a sailboat is called the bow. Many boats also have a spar extending forward of the hull, called the bowsprit.

What are the 5 basic parts of every sailboat?

Every sailboat has at least these five parts, but most boats have many more.  Hull Keel Rudder Rigging Sails

sailboat rigging parts names

Matt has been boating around Florida for over 25 years in everything from small powerboats to large cruising catamarans. He currently lives aboard a 38-foot Cabo Rico sailboat with his wife Lucy and adventure dog Chelsea. Together, they cruise between winters in The Bahamas and summers in the Chesapeake Bay.

Leave a comment

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

sailboat rigging parts names

DiscoverBoating

Parts of a Sailboat

There is so much to love, and learn, about boating. Learn all about getting on the water with a sailboat in our Sailing page .

Or jump right in to explore the right sailboat for you: Explore sailboats .

Block The nautical term for a pulley

Boom A horizontal pole that attaches to the mast and is used to extend the foot of the mainsail

Bow The forward part of a boat

Centerboard A pivoting plate used to balance a boat and lessen leeway

Cleat A fastening around or in which lines can be secured

Hull The primary structural body of a vessel, not including superstructure, masts or rigging

Keel A boat's fixed underwater part used to prevent sideways drift and provide stability

Line Any piece of rope on a boat

Mast A pole placed vertically on a boat used to support sails

Painter A line attached to a small boat's bow used to tie it to a dock or another boat

Rudder A boat's movable underwater steering board

Shackle A metal fitting commonly used to connect sails and halyards

Shrouds and stays Wires that hold the mast upright (the front one is the forestay)

Spreader Struts attached to the mast to increase the holding power of the shrouds

Stern A boat's afterpart

Tiller A wooden or metal "stick" used to turn the rudder

Transom A boat's afterpart that is square to its centerline

Wheel A steering apparatus

Winch A metal drum-shaped object around which lines are wrapped to make trimming them easier

sailboat rigging parts names

COMMENTS

  1. Sailboat Parts Explained: Illustrated Guide (with Diagrams)

    The hull is what most people would consider 'the boat'. It's the part that provides buoyancy and carries everything else: sails, masts, rigging, and so on. Without the hull, there would be no boat. The hull can be divided into different parts: deck, keel, cabin, waterline, bilge, bow, stern, rudder, and many more.

  2. Sailboat Rigging Hardware & Parts

    Let us help. 206-632-4462. Shop sailboat rigging hardware, including stainless steel rigging hardware, marine rigging supplies, and detailed parts of a sailboat rigging. Shop now!

  3. Sailboat Rigging Parts: A Comprehensive Guide

    The primary sailboat rigging parts include the mast, boom, standing rigging (such as shrouds and stays), running rigging (halyards and sheets), blocks or pulleys, turnbuckles, cleats, winches, and various fittings. Each of these components has its specific purpose in controlling the sails' position and tension. 2.

  4. Parts of a Sailboat Rigging: A Comprehensive Guide

    Sailboat rigging components refer to the various parts and systems that help support and control the sails on a sailboat. These components include standing rigging (the fixed parts) and running rigging (lines that can be adjusted). Some common examples of rigging components are the mast, boom, shrouds, stays, halyards, sheets, and blocks. 2.

  5. Master The Running Rigging On A Sailboat: Illustrated Guide

    The running rigging on a sailboat is the lines and ropes controlling the sails and equipment. Get in the cockpit, and let's cruise through this guide together! ... The rig or rigging on a sailboat is a common term for two parts, the standing, ... The Boom Vang has a few different names. Rod-kicker, kicking strap, or kicker. It is used to ...

  6. Explaining The Standing Rigging On A Sailboat

    The difference between standing rigging and running rigging. Sometimes things can get confusing as some of our nautical terms are used for multiple items depending on the context. Let me clarify just briefly: The rig or rigging on a sailboat is a common term for two parts:. The standing rigging consists of wires supporting the mast on a sailboat and reinforcing the spars from the force of the ...

  7. Standing Rigging (or 'Name That Stay')

    A sailboat's standing rigging is generally built from wire rope, rod, or occasionally a super-strong synthetic fibered rope such as Dyneema ®, carbon fiber, kevlar or PBO. 1×19 316 grade stainless steel Wire Rope (1 group of 19 wires, very stiff with low stretch) is standard on most sailboats. Wire rope is sized/priced by its diameter which ...

  8. The Parts of Sailboat: A Complete Guide

    A basic sailboat is composed of at least 12 parts: the hull, the keel, the rudder, the mast, the mainsail, the boom, the kicking strap (boom vang), the topping lift, the jib, the spinnaker, the genoa, the backstay, and the forestay. Read all the way through for the definition of each sailboat part and to know how they work.

  9. The Parts of a Sailboat Explained in Words and Pictures

    Some parts of a sailboat are very small and cheap, but are far from insignificant. Take the humble clevis pin for example; find one of these on the foredeck and you've cause to be concerned for the security of your rig! ... The running rigging is the collective name for the lines (halyards, sheets, topping lifts, uphauls, downhauls etc) that ...

  10. How To Rig A Sailboat

    5. Secure the mast using the appropriate rigging and fasteners. Attach the standing rigging, such as shrouds and stays, to the mast and the boat's hull. Fact: The mast of a sailboat is designed to withstand wind resistance and the tension of the rigging for stability and safe sailing. 2.

  11. Rigging for beginners # 1. Sailboat rigging explained

    A beginners guide to sailboat rigging, including standing rigging and running rigging. This animated tutorial is the first in a series and covers sails, line...

  12. Sailboat Hardware

    Dynamic Dollies. Dynamic/Seitech Dollies Compatible Parts. Type 1: Boats up to 250 lbs Dollies. Type 2: Laser, Byte & Invitation Dollies. Type 3: Curled Gunwale Boats Dollies. Type 4.1: Small/Med Bowsprit Boats Dollies. Type 4.2: Heavier Sprit Boats Dollies.

  13. Sailboat Parts Names: A Comprehensive Guide to Understanding the

    Short answer sailboat parts names: Sailboat parts have various names that serve different functions. Some common sailboat parts include the mast, boom, rudder, keel, shroud, mainsail, jib sail, and winches. ... The boom and mast are two vital components of a sailboat's rigging system. The mast is a vertical structure that holds up the sails ...

  14. Rigging Explained: Standing & Running (Sailboat Parts Explained)

    In part 3 of our series on sailboat parts, we dive into two types of rigging: standing rigging and running rigging. I use a 3D model and some diagrams to giv...

  15. Guide to Understanding Sail Rig Types (with Pictures)

    The two-masted rigs are: Lugger - two masts (mizzen), with lugsail (a cross between gaff rig and lateen rig) on both masts. Yawl - two masts (mizzen), fore-and-aft rigged on both masts. Main mast is much taller than mizzen. Mizzen without a mainsail. Ketch - two masts (mizzen), fore-and-aft rigged on both masts.

  16. Parts of a Sailboat

    Parts of a sailboat - top view. All the lines running from the mast to the cockpit are led through the system of blocks and then through rope clutches, so that they can be put on the winches. Each line has its own clutch and each clutch has two positions: opened and closed. When the clutch is opened, the line can move freely in both directions.

  17. Rig-Rite Inc.

    Spars, Rigging, and Hardware for Sailboats. Rig-Rite, Inc. Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149 www.RigRite.com ... Furling Systems - Systems and replacement parts from a variety of Manufacturers. Traveller Systems - Adjustable Track Systems for Mainsheet and other applications. Sailboat Hardware - Rope Clutches, ...

  18. Parts of a Sailboat: The Definitive Guide

    For this next part, I am going to talk about what is above the deck, the rigging. The rig includes the sails, the supporting cables, and everything that controls all of this. These are the parts of a sailboat that make it a sailboat and not just a mere boat. Everything we went over, prior to this, had fairly normal, easy-to-remember names.

  19. Running Rigging Glossary

    Sailboat Rigging can be divided in to 2 categories: Standing Rigging - the wires and ropes that hold up the mast, also known as shrouds or stays. Running Rigging - the ropes (and wires) that control the sails on a yacht. There are a large number of different terms that cover the use for which each rope is employed.

  20. Sailboats Explained: Types, Parts, Keels, Rigs, and Hulls

    Hull types. The hull is the body shape of the boat: the part that floats in or on top of the water surface and provides the boat's buoyancy. While most sailboats use the same hull design, there are many different types, all with different properties. The type of hull affects your boat's performance, handling, stability, and safety.

  21. Sailboat Hardware, Parts & Accessories

    Shop sailboat parts and hardware from Fisheries Supply, including gudgeon pintle sets, Harken blocks, boom vangs, rope clutches, and sailing instruments. ... Sailboat Rigging Hardware & Parts (288) Sailing Instruments (67) Sailboat Furling Systems & Hardware (151) Sailboat Winches, Parts & Kits (183)

  22. Illustrated Guide to Sailboat Parts [Updated 2023]

    Sailboat hulls are displacement hulls, which means they sit low in the water and move relatively slowly. The hull's job is to displace water, so you stay afloat! Bow. The forward "pointy end" of the boat. Stern. The rear end of the boat. Transom. If the stern of a boat has a flat section, it is called the transom.

  23. Parts of a Sailboat

    A metal fitting commonly used to connect sails and halyards. Shrouds and stays. Wires that hold the mast upright (the front one is the forestay) Spreader. Struts attached to the mast to increase the holding power of the shrouds. Stern. A boat's afterpart. Tiller. A wooden or metal "stick" used to turn the rudder.