scampi 30 sailboat data

Scampi 30 3

The scampi 30 3 is a 29.75ft masthead sloop designed by peter norlin and built in fiberglass between 1971 and 1973..

The Scampi 30 3 is a moderate weight sailboat which is slightly under powered. It is stable / stiff and has a low righting capability if capsized. It is best suited as a coastal cruiser.

Scampi 30 3 for sale elsewhere on the web:

Main features

Login or register to personnalize this screen.

You will be able to pin external links of your choice.

See how Sailboatlab works in video

We help you build your own hydraulic steering system - Lecomble & Schmitt

Accommodations

Builder data

Modal Title

The content of your modal.

Personalize your sailboat data sheet

Paste a link here:

Give it a title:

And eventually a link to an image for the thumbnail:

Albin Scampi

Albin Scampi 30

Scampi 30-2, performance, accomodation.

Report error

Tell us what's wrong

We do our best to fix any errors in boatpedia. thanks for the help.

Review of Scampi 30

Basic specs..

Both the hull and the deck is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

The interior is like most other boats made of teak. Teak has the advantage of being naturally very oily and therefore water-repellent, which is suitable on boats. The boat is equipped with one cabin, 5 berths, a galley, 70.0 liter fresh water capacity and toilet facility. Note: the boat has also been sold to be self-made/-interiored, which means that the quality of each boat may vary.

Scampi 30 has more than one rig. One option is a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.

The keel is made of iron. Many people prefer lead keel in favour of iron. The main argument is that lead is much heavier than iron and a lead keel can therefore be made smaller which again result in less wet surface, i.e. less drag. In fact iron is quite heavy, just 30% less heavy than lead, so the advantage of a lead keel is often overstated.

The boat can enter most marinas as the draft is just about 1.52 - 1.62 meter (4.99 - 5.29 ft) dependent on the load. See immersion rate below.

The boat is typically equipped with an inboard Yanmar diesel engine at 12.0 hp (8 kW), which gives a max speed about 4.6 knots.

The transmission is a saildrive.

The fuel tank which is made of stainless steel has a capacity of 25.0 liters (6 US gallons, 5 imperial gallons).

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

What is Capsize Screening Formula (CSF)?

The capsize screening value for Scampi 30 is 2.07, indicating that this boat would not be accepted to participate in ocean races.

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.4 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Scampi 30 is about 143 kg/cm, alternatively 803 lbs/inch. Meaning: if you load 143 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 803 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

What is Motion Comfort Ratio (MCR)?

What is L/B (Length Beam Ratio)?

What is a Ballast Ratio?

What is Displacement Length Ratio?

What is SA/D (Sail Area Displacement ratio)?

What is Relative Speed Performance?

Maintenance

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 24m 2 (258 ft 2 ). Based on this, your favourite maritime shop can tell you the quantity you need.

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

We are always looking for new photos. If you can contribute with photos for Scampi 30 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.

• Forums New posts Unanswered threads Register Top Posts Email
• What's new New posts New Posts (legacy) Latest activity New media
• Media New media New comments
• Boat Info Downloads Weekly Quiz Topic FAQ 10000boatnames.com
• Classifieds Sell Your Boat Used Gear for Sale
• Parts General Marine Parts Hunter Beneteau Catalina MacGregor Oday
• Help Terms of Use Monday Mail Subscribe Monday Mail Unsubscribe

Yamaha 30 / Scampi 30

• Thread starter IORHalfTunner
• Start date Jan 17, 2023
• Brand-Specific Forums

IORHalfTunner

• Can anybody comment on the history of the Yamaha 30? Particularly about the differences between the MkI and MkII.
• Prior to the Yamaha 30, did Yamaha actually produce the Scampi 30 under license? I see this as being more plausible than the current Wikipedia claim that the Scampi 30 "...was built by several companies including the Yamaha Corporation in Japan as the Yamaha 30"
• This listing suggests the licencee angle.

Sailboatdata also writes " The third version of the SCAMPI was built by a number of firms around the world. (In Japan as the YAMAHA-30) ." I agree that the "new" Yamaha 30 is obviously not the same boat as the Scampi 30 as Sailboatdata claims. However, as both the image of the Yamaha 30 manual (shown above) and the photos in the linked article show, one version of the Y30 was clearly a twin to the Scampi 30-3! Which one? My primary question is still: Were there actually three versions of the Yamaha 30 produced?  

Hollyberry said: Sailboat Data does give credit to Norlin and contains comments regarding the Y 30 being 'based' on the Scampi... but the Y 30 is a much higher volume boat . The forward engine in the early days was odd, but they changed that during the run. I think a more direct 'descendant' of the Scampi would be the Evetts 31, a short production run built in Vancouver BC. View attachment 212356 Click to expand

Alan Gomes said: That's a cool looking boat! First time I've heard of it. Click to expand

IORHalfTunner said: Indeed, Alan. But not only is the Scampi 30 "cool looking" it's also "hot sailing" . View attachment 212357 Click to expand

IORHalfTunner said: Can anybody comment on the history of the Yamaha 30? Particularly about the differences between the MkI and MkII. Click to expand

gouldx said: If I'm not mistaken, the main differences between mk i and mk ii are the position of the engine and some modifications to the cabin Click to expand

Interesting! I didn't realize there was another Y30, but your manual certainly suggests otherwise. A quick search shows a couple 1979 "Yamaha Scampi" examples for sale in Japan, but without any visible branding in the photos. I wonder if it was exclusive to the Japanese domestic market.  

Ever since I started to research the Scampi 30 (one of which I now very proudly own), I knew of the Y30. But, something wasn't right with the claim by Sailboatdata that what is now widely known as the Y30 is Yamaha's version of the Scampi 30. To me it was obvious that the boats were completely different from each other. It's only when I dug even deeper and found a couple of Japanese blogs describing the Scampi-looking boats in the posts as Yamaha 30s that I knew that there was something more to this story. As soon as I came across the photo of the manual, all became very clear to me. I doubt that the Japanese Scampis ( the original Y30s ) were allowed to be exported from Japan. Different licencees took care of the other international markets. These included Nautic Saintonge in France and Solna Corp in the US. Perhaps Yamaha decided to have a pure-Yamaha Y30 designed so that they wouldn't be faced by the same export restrictions. It would be nice if someone can fill-in the details of this fascinating history.  

Blue Horizon

Indeed, the Scampi 30 as well as the first generation Yamaha 30 (since it's clear now that the latter was merely a re-badged Scampi 30!) has a hard midships chine. It's the most distinguishing feature of this boat. Something else rather unique was Peter Norlin's decision to locate the engine ahead of the mast. It was another one of those infamous "cheats" to take eck out every possible advantage from the IOR rule. This one shortened the waterline when not moving.  

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Scampi 30-4

Scampi 30-4 is a 29 ′ 9 ″ / 9.1 m monohull sailboat designed by Peter Norlin and built by Shipman and Albin Marine between 1973 and 1982.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

It is believed about 750 MK IV’s were built. Builders: Alvdalen: to 1974 Shipman: 1975 Albin: 1976-1982

Embed this page on your own website by copying and pasting this code.

Discover Related Sailboats

Scampi 30-2

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

• Nautic Saintonge

Scampi 30 - Nautic Saintonge / STW002536

cabin cruiser

cruising/regatta

Volvo s-drive 13hp

overall length

hull length

waterline length

standard draft

minimum draft

displacement

diesel tank

mast height

Accomodation layouts

standard version

If you find some wrong or lacking data of this boat, you can propose an update.

Technical forum: scampi 30, note: you will be redirected to another website., support the ultimate sailboat database.

The contents on this website, which today you can simply consult and use, have been collected, organized and archived by people who worked and invested in this project with passion and dedication for many years.

Before proceeding to browse, support our archive with a small donation that will allow us to maintain and improve this project.

proceed, I will donate next time

To proceed, you need to sign-in

• Search forums
• Yachting Monthly's Scuttlebutt

Considering Scampi 30 Mk IV

• Thread starter jcp
• Start date 13 Aug 2015
• 13 Aug 2015

Hi everyone, I'm seriously considering buying an Albin Scampi 30 Mk IV. I'm a first-time boat buyer and I've read up as much as I can about the Scampi and buying a used boat in general, but I'd appreciate any advice anyone could give. The boat appears to be in remarkably good condition. It had new engine installed in 2008 which has 35 hours - a Lombardini 20HP, located under the forepeak as per the original design. The rigging hasn't been replaced for some time but looks to be in good condition. One uncertainty I have surrounds the boat's stability and ballast-displacement ratio. As a relatively inexperienced sailer I'd like a boat which feels comfortable - particularly for sailing with friends and family - so I'd like a decent amount of ballast. The boat has a deep fin keel and the owner claims the Ballast-displacement ratio is over 50%. However, other sources online suggest it's 36% ( http://sailboatdata.com/viewrecord.asp?class_id=1049 ). Can anyone shed any more light on this? I'm going to view the boat a second time and will get a survey done next. How well does a Scampi sail and is this an appropriate boat for someone of my experience?  

• 14 Aug 2015

Well-known member

I believe that the Scampi was based on the same hull as the Albin Ballad and this seems to be backed up by these comments: http://www.sailnet.com/forums/boat-reviews/57457-scampi-30-a.html Take some of it with a pinch of salt but is does seem to back up the ballast ratio idea of 30odd percent. If you search for Scampi and Ballad together you will likely get a lot more comparison/information. For you, the Ballad may have been a more suitable boat today but then again you are just as likely to grow into it. With these big masthead rigs you can get rid of a lot of sail very conveniently with your roller genoa, so being overwhelmed is not going to be much of a worry. The position of the engine is superb for weight distribution but not so handy for close quarters work under engine - a bit like having a sail drive. Just a case of taking things steady till you find your feet.  

Daydream believer

I am sure that the scampi was an early half ton racing boat so will be a fair performer. The flat sides were a necessity due to width restrictions either in building or mooring ( i forget which) I sailed against one many years ago & they certainly sailed well If you can actually find a good one in good nick you will not go far wrong performance wise I had a lombardini 10 hp & it was originally designed as a static generator engine. Good thing about it was that the alternator etc, were from standard car parts So a fiat, lucas unit all fitted & readily available Not sure if yours is the same sort of thing but if so cheaper in that respect i would expect although dealerships not so common as say volvo  

doug748 said: I believe that the Scampi was based on the same hull as the Albin Ballad and this seems to be backed up by these comments: http://www.sailnet.com/forums/boat-reviews/57457-scampi-30-a.html Click to expand...

That's it. Very similar hulls, both developments of the original Joker.  

Active member

doug748 said: I believe that the Scampi was based on the same hull as the Albin Ballad and this seems to be backed up by these comments: http://www.sailnet.com/forums/boat-reviews/57457-scampi-30-a.html Take some of it with a pinch of salt but is does seem to back up the ballast ratio idea of 30odd percent. If you search for Scampi and Ballad together you will likely get a lot more comparison/information. For you, the Ballad may have been a more suitable boat today but then again you are just as likely to grow into it. With these big masthead rigs you can get rid of a lot of sail very conveniently with your roller genoa, so being overwhelmed is not going to be much of a worry. The position of the engine is superb for weight distribution but not so handy for close quarters work under engine - a bit like having a sail drive. Just a case of taking things steady till you find your feet. Click to expand...

doug748 said: That's it. Very similar hulls, both developments of the original Joker. Click to expand...

Just a word of caution. As the others have said, potentially good performer, but perhaps not a beginner's family cruising boat. There are many better designs for that purpose. Given your concern about your own inexperience and wanting to take family and friends, suggest you look for something more sedate to start off with. No particular suggestions, because we all have our favourites, but there is a huge choice of boats in that size/price/age range.  

BabaYaga said: Sorry, but no. There were several "copies" made, based on the original Joker, one of which is the Ballad. But Scampi was not one of them. Click to expand...

As others have said, the Scampi was based upon a very successful IOR "Half Ton" racer from the 70s. Very distinctive appearance due to the bump on the topsides - which was, I believe, trying to tweak around the IOR rules fixed measurement points, to reduce rating. More info on the Scampi here: http://sailboatdata.com/viewrecord.asp?class_id=1049 In its time it was very much a racer cruiser (albeit one with a very good reputation) - so perhaps not an ideal first boat, but no direct experience so can't comment specifically.  

Twister_Ken

It was certainly a hot racing boat in its day. One, Olivia Anne IV (?) was the boat to beat in the JOG series. Not a boat I'd nominate as a sedate family cruiser, though.  

Don't get too concerned about the ballast ratio. It can be misleading when deciding whether to buy. I have never sailed a Scampi but have now looked up a few pics and the spec. She looks a perfectly good boat and if she is fast, so much the better. You will soon learn how best to sail her within your comfort zone. Finally, don't forget that all prices for second hand boats are very negotiable these days and an agreement on price (subject to survey) should be completed before spending money on a survey.  

• 15 Aug 2015

I skippered the Scampi Elad in the NECRA race Hartlepool-IJmuiden 1974, much of the way with a F6 NW so we ran under spinnaker until it wrapped around the masthead as we overtook it surfing down a steep wave-front off the Texel LV. We were 2nd in class and I remember she handled beautifully on all points of sail, both in the race and returning a week later to Whitby, her base, with eight souls aboard - two extra hitching a ride back. Edit: Whoops, just noticed the "MK IV" on posting - not the MK II I experienced. Sorry.  

• 29 Jun 2016
• 30 Jun 2016

He was probably put off by those who advised that a boat with a bit of performance was unsuitable for a beginner, shame, they sail really well.  

Quandary said: He was probably put off by those who advised that a boat with a bit of performance was unsuitable for a beginner, shame, they sail really well. Click to expand...

• 11 Jul 2016

You're precisely right. Despite being in great condition and a good offer I was ultimately too sensible to opt for such a lively boat given my relative inexperience. I'm sure it's a great boat though!  

• 13 Jul 2016

Members online

• bromleybysea
• TipsyWaitress
• FairweatherDave
• Dijon Mustard
• john_morris_uk
• AntarcticPilot
• snowbird30ds
• Openelectron
• Puffin10032

Share this page

• Choose the kind of boat Big boats Motor boats Rubber boats Sailing boats Sailing multihull boats

Albin Marin Scampi 30

General Data

Shipbuilder:, see also: boats for sale.

• Feeling 286 S
• Plastivela Mousse 907
• Beneteau First 30
• Hegger 5.5 Stazza Internazionale
• Shipman (Albin) Scampi 30

Overall length:

Waterline length:, maximum beam:, displacement:, straightening:, construction materials:, sail details mq, equipments:, transmission:, interior materials:, boat capacity:, water tank:.

Beam:  9.5'    Draft:  5'     Beam:  9'    Draft:  5'2'     Beam:  9'    Draft:  5'     Beam:  9.5'    Draft:  5.2'     Beam:  9.5'    Draft:  5.1' © 2001-2024 ./)   . . ./)   . . Forum Listing Marketplace Advanced Search About The Boat Boat Review Forum SailNet is a forum community dedicated to Sailing enthusiasts. Come join the discussion about sailing, modifications, classifieds, troubleshooting, repairs, reviews, maintenance, and more! Albin Scampi 30 MK IV Add to quote Attachments Having the diesel drive a hydraulic pump to turn the prop sounds a lot like the hydro drive in my 60 year-old lawn tractor. Simple transmission with few parts to break or wear out. It seems to last - at least so far. Have to cut the grass again today. Something to be aware of is the galvanized steel floors/keel structure that this boat probably has. We looked at a bigger Albin where this was in very sorry shape.   ?             175.5K members Top Contributors this Month 327 IMAGES Scampi 30 : STW002536 : the SailingTheWeb sailboat datasheet SCAMPI 30-2 Scampi 30 : STW002536 : the SailingTheWeb sailboat datasheet Scampi 30 : STW002536 : the SailingTheWeb sailboat datasheet SCAMPI 30-4 Scampi 30 : STW002536 : the SailingTheWeb sailboat datasheet VIDEO Scampi 30 single-handed 2 Cruising Denmark Epi 09 Amazing boat fits in a box Fast sailing weekend trip Scampi30. 14-24 knt. of wind Sailing Scampi 30 in June 2023 Recall spamming COMMENTS SCAMPI 30-2 The SCAMPI was Peter Norlins first yacht design. It's hard to think of a case where the first effort of any designer achieved similar success. The prototype, (by convention, referred to as the MKI,) trounced the competition at the half ton cup of 1969 (sailed under the RORC handicap rule). After going into production, this […] Scampi 30 Scampi 30 . nya.scampiforbundet.se. Scampit 30 - detailed info on all version - in Swedish. Related Sailboats: Sort by: ... 3 Sailboats / Per Page: 25 / Page: 1. 0 CLICK to COMPARE . MODEL LOA FIRST BUILT FAVORITE COMPARE; SCAMPI 30-2: 29.75 ft / 9.07 m: 1970: SCAMPI 30-3: 29.75 ft / 9.07 m ... Scampi 30 The Scampi 30 is a family of Swedish sailboats that was designed by Peter Norlin as an International Offshore Rule (IOR) Half Ton class cruiser-racer and first built in 1970. The design was Norlin's first and proved to be both a sail racing and commercial success. Production. The ... Scampi 30-2 Scampi 30-2 is a 29′ 9″ / 9.1 m monohull sailboat designed by Peter Norlin and built by Albin Marine between 1970 and 1971. ... The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more. Formula. D/L = (D ÷ 2240) ÷ (0.01 x LWL)³ D: Displacement of the boat in pounds. LWL ... Scampi 30 2 The Scampi 30 2 is a 29.75ft masthead sloop designed by Peter Norlin and built in fiberglass by Albin Marine between 1970 and 1971. The Scampi 30 2 is a moderate weight sailboat which is a reasonably good performer. It is stable / stiff and has a low righting capability if capsized. It is best suited as a coastal cruiser. Scampi 30 : STW002536 : the SailingTheWeb sailboat datasheet The Scampi 30 produced by the builder Nautic Saintonge and designed by Peter Norlin, is a cabin cruiser for cruising/regatta, rigged Sloop ... read more on Sailing The Web, the ultimate sailboat database ... If you find some wrong or lacking data of this boat, you can propose an update. TECHNICAL FORUM: Scampi 30. Login to ask questions. Scampi 30 3 The Scampi 30 3 is a 29.75ft masthead sloop designed by Peter Norlin and built in fiberglass between 1971 and 1973. The Scampi 30 3 is a moderate weight sailboat which is slightly under powered. It is stable / stiff and has a low righting capability if capsized. It is best suited as a coastal cruiser. Review of Scampi 30 MK III The Scampi 30 MK III is equipped with a fin keel. The fin keel is the most common keel and provides splendid manoeuvrability. The downside is that it has less directional stability than a long keel. The keel is made of iron. Many people prefer lead keel in favour of iron. The main argument is that lead is much heavier than iron and a lead keel ... SCAMPI 30-2 The SCAMPI 30-2 is a sailing boat that was designed by Peter Norlin and built by the Swedish company Scampi Marin AB. It is a popular racing and cruising yacht known for its performance and seaworthiness. Here are some key features and characteristics of the SCAMPI 30-2: Specifications SCAMPI 30-2 SCAMPI 30-2 Sailboat Data Hull Type: Fin with rudder on skeg Rigging Type: Masthead Sloop LOA: 29.75 ft / 9.07 m LWL: 23.00 ft / 7.01 m S.A. (reported): 388.00 ft² / 36.05 m² Beam: 9.84 ft / 3.00 m Displacement: 7,275.00 lb / 3,300 kg Ballast: 2,778.00 lb /… Review of Scampi 30 In fact iron is quite heavy, just 30% less heavy than lead, so the advantage of a lead keel is often overstated. The boat can enter most marinas as the draft is just about 1.52 - 1.62 meter (4.99 - 5.29 ft) dependent on the load. Yamaha 30 / Scampi 30 Scampi 30 Halifax. Jan 17, 2023. #1. Hello Cousins. I'm looking for some historical background on the Yamaha 30. I'm a very happy owner of a Scampi 30-4. "Apparently" this boat is related to the Yamaha 30. I've seen comments stating that Peter Norlin was commisioned to draw the lines for the Y30. I've also seen claims that the Yamaha 30 is a ... Scampi 30-4 Scampi 30-4 is a 29′ 9″ / 9.1 m monohull sailboat designed by Peter Norlin and built by Shipman and Albin Marine between 1973 and 1982. ... The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more. Formula. D/L = (D ÷ 2240) ÷ (0.01 x LWL)³ D: Displacement of the boat in pounds ... Buying a Scampi 30 Mk 4 The Albin stable was famous for upwind sailing. Scampis carry significantly less ballast than the Ballad -- like, 1000 lbs less, 36% ballast ratio rather than 47% -- and will need bodies on the rail or earlier reefing to stand up in stronger winds. IIRC, most Scampis had deck-stepped masts and some kind of compression arch/post design. Scampi 30 : STW002536 : the SailingTheWeb sailboat datasheet data sheet code. STW002536. model name. Scampi 30. builder name. Nautic Saintonge. France; designer name. Peter Norlin. boat type. cabin cruiser. purpose. cruising ... Considering Scampi 30 Mk IV Hi everyone, I'm seriously considering buying an Albin Scampi 30 Mk IV. I'm a first-time boat buyer and I've read up as much as I can about the Scampi and buying a used boat in general, but I'd appreciate any advice anyone could give. The boat appears to be in remarkably good condition. It had new engine installed in 2008 which has 35 hours - a ... Sailing boats Scampi 30 of sailing boat from yard Albin Marin. Sailing boat , Albin Marin , 1260.0 , Peter Norlin , Scampi 30 , 7.0 , Teak , 70.0 , 5 , S-drive , 3.06 , 9.06 ... Albin Scampi 30: buy used sailboat The Scampi 30 is designed as an IOR half-tonner. The Scampi 30 is a recreational keelboat built primarily of polyester, with wood incorporated into the interior. All versions have masthead sloop rigging with aluminum spars, mast on deck, standing rigging and a single set of unspread spreaders. The hulls all have a rising stem, raised transom ... SCAMPI 30-3 The third version of the SCAMPI was built by a number of firms around the world. (In Japan as the YAMAHA-30). It continued its winning ways by placing 1 2 3, in the Int. Half Ton Cup of 1971, held in England. It is thought that nearly 200 of the MKIII version were built, and many more of later versions, making it one of the most popular boats ... Scampi sailboats for sale by owner. Scampi preowned sailboats for sale by owner. Scampi used sailboats for sale by owner. Home. Register & Post. View All Sailboats. Search. Avoid Fraud. ... 30' Canadian Sailcraft Cs30 Marina Gosselin ST-Paul-de-lile-aux-noix Quebec Asking $35,000. 38' Contest 38s winged keel Asking $85,000. Albin Scampi 30 MK IV Having the diesel drive a hydraulic pump to turn the prop sounds a lot like the hydro drive in my 60 year-old lawn tractor. Simple transmission with few parts to break or wear out. It seems to last - at least so far. Have to cut the grass again today. Something to be aware of is the galvanized steel floors/keel structure that this boat probably ... catamaran gulet motorboat riverboat sailboat trimaran yacht