How To Install Case Fan Tower Phantom 410
Welcome to our comprehensive guide on how to install a case fan tower in the Phantom 410. The Phantom 410 is a popular case among PC enthusiasts due to its sleek design and efficient cooling capabilities. By installing a case fan tower, you can further enhance the airflow within your system, keeping your components cool and improving overall performance.
In this guide, we will walk you through the step-by-step process of installing a case fan tower in the Phantom 410. We will cover everything from gathering the necessary tools and materials to testing the installation to ensure optimal functionality. Whether you are a seasoned computer builder or a beginner looking to upgrade your system, this guide will provide you with the knowledge and confidence to successfully install a case fan tower.
Before we delve into the installation process, it is important to mention that safety should be a top priority. Make sure to work in a well-ventilated area, turn off and disconnect power from your PC, and ground yourself to prevent any potential damage from static electricity.
Now, let’s get started on this exciting journey of installing a case fan tower in your Phantom 410!
Gathering the necessary tools and materials
Before you begin the installation process, it is essential to gather all the necessary tools and materials. Having everything ready beforehand will make the installation process smoother and more efficient. Here is a list of items you will need:
- A case fan tower: Choose a reliable and suitable fan tower that fits the Phantom 410 case. Consider factors such as size, airflow, and noise level to ensure optimal performance.
- A screwdriver: Most case fan towers require screws for installation. Make sure you have the appropriate screwdriver, typically a Philips or flat head, to securely fasten the tower.
- Thermal paste: This substance is crucial for proper heat conduction between the CPU and the fan tower. Ensure you have a quality thermal paste that is compatible with your processor.
- Cable ties or management: These are handy for keeping your cables organized and minimizing clutter in your case.
- Antistatic wrist strap (optional): If you want to take extra precautions against static electricity, consider using an antistatic wrist strap to ground yourself during the installation process.
Before purchasing any of these items, it is recommended to refer to the manufacturer’s guidelines and specifications for the Phantom 410 case. This will ensure that the fan tower and other accessories are compatible and suitable for your specific setup. Additionally, it is always helpful to have the user manual for both the case and the fan tower readily available for reference.
Once you have gathered all the necessary tools and materials, you are now ready to proceed with the installation process. In the next section, we will guide you through the steps of preparing your case for the fan tower installation.
Preparing the case
Before installing the case fan tower, it is important to prepare the Phantom 410 case. This involves removing any necessary panels or components that may obstruct the installation.
Follow these steps to properly prepare your case:
- Turn off and unplug your computer: Ensure that your PC is completely powered down and disconnected from the power source to avoid any potential accidents.
- Open the case: Remove any side panels or access panels on the Phantom 410 case. This will provide you with easy access to the internal components.
- Identify the mounting area: Locate the area inside the case where the case fan tower will be installed. This is typically near the CPU or along the top or rear of the case.
- Remove any existing fans (if applicable): If your case already has fans installed in the mounting area, carefully remove them by unscrewing any screws or releasing any clips holding them in place.
- Clean the mounting area: Use a soft cloth or compressed air to remove any dust or debris from the mounting area. Ensure that the surface is clean and free from any obstacles that could hinder the installation process or obstruct the airflow.
- Check for compatibility: Before proceeding, ensure that the case fan tower you have chosen is compatible with the mounting area in the Phantom 410 case. Refer to the manufacturer’s guidelines and compatibility specifications to confirm.
By properly preparing the case, you will create an optimal environment for the case fan tower installation and ensure that it functions efficiently. With the case ready, it is now time to mount the fan tower, which we will cover in the next section.
Mounting the fan tower
Now that you have prepared the Phantom 410 case for the installation, it’s time to mount the case fan tower. This step involves securely attaching the fan tower to the designated mounting area within the case. Follow these step-by-step instructions:
- Locate the fan tower mounting holes: Examine the fan tower and identify the mounting holes or brackets. These are the areas where the tower will be attached to the case.
- Align the fan tower with the mounting area: Carefully position the fan tower in the designated mounting area, ensuring that it aligns with the holes or brackets.
- Secure the fan tower: Using the screws provided with the fan tower, fasten the tower to the case. Insert the screws through the mounting holes on the tower and tighten them gently, avoiding excessive force that could damage the case or the components.
- Double-check the stability: Once the fan tower is attached, gently wiggle it to ensure it is securely fastened and stable in its position. If there is any movement, tighten the screws further.
- Consider additional fans (optional): If your case allows, you may consider installing additional fans in other available mounting areas. This can further improve your system’s cooling performance.
It is important to note that each case fan tower may have specific mounting instructions provided by the manufacturer. Be sure to consult the user manual or any accompanying documentation for any additional details or specific steps that may need to be followed.
Once the fan tower is securely mounted, you are ready to proceed with connecting it to the motherboard, which we will cover in the next section.
Connecting the fan tower to the motherboard
After mounting the case fan tower in the Phantom 410, the next step is to connect it to the motherboard. This step ensures that the fan tower receives power and can be controlled by the system. Follow these instructions to properly connect the fan tower:
- Locate the fan header on the motherboard: Look for the fan headers on the motherboard. These are usually labeled “SYS_FAN” or “CHA_FAN” and can be found near the CPU socket.
- Identify the fan connector: Locate the fan connector on the case fan tower. This is usually a 3-pin or 4-pin connector.
- Align and insert the connector: Align the pins on the fan connector with the corresponding holes on the fan header. Ensure that the alignment is correct and gently insert the connector into the header.
- Secure the connection: Once the connector is inserted, you may need to use small plastic clips or cable ties to secure the connection and prevent it from accidentally coming loose.
- Repeat for additional fans (if applicable): If you have installed multiple case fans, repeat the same process for connecting them to the available fan headers on the motherboard.
It is important to check the motherboard’s manual for specific instructions related to fan connectors and headers. Some motherboards may have additional features, such as PWM (Pulse Width Modulation) support, which can provide more precise control over the fan speed.
By connecting the case fan tower to the motherboard, you ensure that it is powered and can be properly controlled by the system. This enables you to adjust the fan speed and optimize the cooling performance of your PC. With the fan tower connected, it’s time to move on to testing the installation, which we will cover in the next section.
Testing the installation
Now that you have successfully mounted and connected the case fan tower in the Phantom 410, it’s time to test the installation to ensure everything is functioning properly. Follow these steps to effectively test the fan tower:
- Power on your computer: Ensure that all cables are properly connected and the power supply is turned on.
- Access your system’s BIOS or UEFI settings: Restart your computer and enter the BIOS or UEFI settings by pressing the designated key during the startup process. This key varies depending on your motherboard manufacturer (common keys include F2, Del, or Esc).
- Locate the fan settings: Within the BIOS or UEFI settings, navigate to the section related to fan control or monitoring. Look for options such as “Hardware Monitor,” “Fan Control,” or “System Fan Settings.”
- Verify fan detection: Check if the case fan tower is recognized by the system in the fan settings. You should see information such as fan speed and temperature readings.
- Adjust fan speed (optional): If desired, you can customize the fan speed settings through the BIOS or UEFI. This allows you to manually adjust the fan speed or select a predefined fan profile.
- Observe and test cooling performance: Once you have confirmed the fan detection and adjusted the settings if needed, closely monitor the temperatures of your CPU and other components. Run a demanding task or stress test to gauge the cooling performance of the fan tower.
- Listen for unusual noises: While testing, pay attention to any strange noises emanating from the fan tower. Excessive noise or unusual rattling may indicate a problem with the installation that needs further investigation.
By thoroughly testing the case fan tower, you can ensure that it is functioning correctly and effectively cooling your system. If you notice any issues or abnormal behavior during the testing phase, refer back to the installation steps to double-check your work and make any necessary adjustments. With the installation successfully tested, you can now enjoy the improved cooling performance of your PC.
Congratulations! You have successfully installed a case fan tower in your Phantom 410, enhancing the airflow and cooling capabilities of your PC. By following the step-by-step instructions in this guide, you have learned how to gather the necessary tools and materials, prepare the case, mount the fan tower, connect it to the motherboard, and test the installation.
Installing a case fan tower not only improves the overall performance and longevity of your computer but also helps prevent overheating and ensures a more stable system. The increased airflow provided by the fan tower aids in dissipating heat from critical components such as the CPU and graphics card.
Remember to refer to the user manuals of both the case and the fan tower for specific instructions and compatibility guidelines. If you encounter any difficulties during the installation process, consult online resources or seek assistance from professional computer technicians.
Regularly monitor your system temperatures and adjust fan speed settings as needed to maintain optimal cooling performance. Additionally, keep the fan tower and other components clean by periodically removing dust and debris.
By taking the time to install a case fan tower in your Phantom 410, you have invested in the longevity and performance of your PC. Enjoy the improved cooling and quieter operation as you engage in demanding tasks or gaming sessions.
Thank you for following this installation guide, and we hope it has provided you with the necessary knowledge and confidence to install a case fan tower in your Phantom 410 successfully. Happy computing!
Leave a Reply Cancel reply
Your email address will not be published. Required fields are marked *
Save my name, email, and website in this browser for the next time I comment.
- Digital Banking
- Digital Payments
- Console Gaming
- Mobile Gaming
- VR/AR Gaming
- Gadget Usage
- Gaming Tips
- Online Safety
- Software Tutorials
- Tech Setup & Troubleshooting
- Buyer’s Guides
- Comparative Analysis
- Gadget Reviews
- Service Reviews
- Software Reviews
- Mobile Devices
- PCs & Laptops
- Smart Home Gadgets
- Content Creation Tools
- Digital Photography
- Video & Music Streaming
- Online Security
- Online Services
- Web Hosting
- WiFi & Ethernet
- Browsers & Extensions
- Communication Platforms
- Operating Systems
- Productivity Tools
- AI & Machine Learning
- Emerging Tech
- IoT & Smart Devices
- Virtual & Augmented Reality
- Latest News
- AI Developments
- Fintech Updates
- Gaming News
- New Product Launches
What Team Is Haaland In FIFA 22
How to play wrexham fifa 22, related post, how to cross play fifa 22, how to play fifa 22 ps4 with ps5, how to heal injured players in fifa 22, how to download ps4 version of fifa 22 on ps5, how to get injured in fifa 22 career mode, related posts.
5 Amazing Phantom PC Case For 2024
6 Amazing Antec PC Case For 2024
11 Best Eatx PC Case For 2024
7 Amazing Amd Wraith CPU Cooler For 2024
7 Amazing Am 4 CPU Cooler For 2024
5 Amazing AMD4 CPU Cooler For 2024
8 Amazing Amd CPU Cooler Am4 For 2024
15 Best White Pc Case for 2024
Plug In South LA: Empowering Diverse Startups In Underserved Communities
Byju’s Alpha: Beneficial Owner Of $533 Million Funds Revealed
- Privacy Overview
- Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
NZXT Phantom 410 Review
Sign in / Register
Latest GPU Drivers
- NVIDIA GeForce 551.61 WHQL
- AMD Radeon 24.2.1 WHQL
- Intel Arc & IGP 101.5333 WHQL
New Forum Posts
- 12:34 by Marcus L 5700XT Flashing to NON XT ( 3 )
- 12:32 by Dr. Dro LG OLED C1 TV odd behaviour after nearly 2 years ( 27 )
- 12:32 by Veseleil Is Intel going to deliver a processor/chipset worth waiting for? ( 58 )
- 12:05 by de.das.dude performance issues ryzen 5 5600x rtx 3600 ti ( 3 )
- 12:04 by de.das.dude What's your latest tech purchase? ( 19656 )
- 11:57 by alwayssts F.E.A.R. 2: best of the series? ( 36 )
- 11:53 by kurosagi01 Nintendo Sues Team Behind Yuzu Emulator ( 32 )
- 11:37 by alwayssts What are you playing? ( 20074 )
- 11:13 by Ferather DMAS Design [SPDIF-Optical] ( 62 )
- 10:49 by purecain What controller is this I want to use it in windows? ( 0 )
- Feb 13th, 2024 Chat with NVIDIA RTX Tech Demo Review
- Feb 22nd, 2024 Sparkle Arc A380 Genie Review
- Feb 14th, 2024 Scythe Fuma 3 Review
- Feb 12th, 2024 Upcoming Hardware Launches 2023 (Updated Feb 2024)
- Feb 20th, 2024 Arctic Liquid Freezer III 240 Black Review - Intel Contact Frame Included
- Feb 15th, 2024 NVIDIA GeForce RTX 3050 6 GB Review - The Fastest Slot-Powered GPU
- Feb 26th, 2024 Sapphire Radeon RX 7900 GRE Pulse Review
- Feb 13th, 2024 G.SKILL Trident Z5 RGB DDR5-6400 64 GB CL32 Review
- Feb 16th, 2024 DELUX M800 Ultra Review
- Feb 19th, 2024 EK Nucleus AIO CR360 Lux D-RGB Review
Controversial News Posts
- Intel Core i9-14900KS Draws as much as 409W at Stock Speeds with Power Limits Unlocked ( 226 )
- AMD Ryzen 9 7900X3D Drops to $409, to Clash with Core i7-14700K ( 142 )
- AMD Radeon RX 7900 XT Now $100 Cheaper Than GeForce RTX 4070 Ti SUPER ( 132 )
- NVIDIA Accused of Acting as "GPU Cartel" and Controlling Supply ( 127 )
- NVIDIA GeForce RTX 4070 Ti Drops Down to $699, Matches Radeon RX 7900 XT Price ( 122 )
- NVIDIA RTX 50-series "Blackwell" to Debut 16-pin PCIe Gen 6 Power Connector Standard ( 103 )
- Widespread GeForce RTX 4080 SUPER Card Shortage Reported in North America ( 95 )
- Elon Musk Sues Open AI and Sam Altman for Breach of Founding Contract ( 90 )
Five Gaming Cases Between $80 And $120, Reviewed
Building with the nzxt phantom 410.
- Page 1: Cases For Cost-Conscious Builders
- Page 2: Building With The Corsair 300R
- Page 3: Building With The In Win Mana 136
- Page 4: Building With The MSI Stealth
- Page 5: Building With The NZXT Phantom 410
- Page 6: Building With The Xigmatek Midgard II
- Page 7: Test Settings And Benchmarks
- Page 8: Temperature, Noise, And Acoustic Efficiency
- Page 9: Which Chassis Delivers On Value? How About Quality?
NZXT designed its Phantom 410 with a removable hard drive cage, expanding the case’s normal 11.8” card space to 16.8” in the top five slots. Builders lose four internal bays as a compromise.
With both USB 2.0 and USB 3.0 headers in the mix, NZXT cleans up visible cable clutter by paring back the front-panel audio connector to HD Audio-only. A second bunch of cables connect four of the front-panel fan controller’s six leads to optional fans, while the other two leads are factory-connected to included fans.
NZXT was kind enough to separate all of the Phantom 410’s installation hardware into separate bags.
Hard drives are removed from the reverse (right) side of the Phantom 410.
The Phantom 410 offsets 2.5” drives to one side of the tray. That'd be a necessary concession if the case had backplanes. It doesn't, though. Nevertheless, you still have to take a few seconds to remove the corresponding 3.5” mounting pins from their keyholes prior to screwing the smaller drive in place.
A sliding latch unlocks the 5.25” bays; pulling the latch releases its pins. The Phantom 410 secures external drives on only one side.
An internal fan bracket reduces top-slot card clearance to 10.8”, blocking access to the SATA connectors of our slightly-oversized motherboard. The bracket can be pivoted or removed.
Although removing the fan bracket may have helped our SATA cables fit, the extra width of our motherboard blocked access to needed cable entry holes. We removed the center drive cage to make room for cables to pass through, and didn’t bother to replace the lower cable hole’s grommet when we found that merely bumping it caused it to fall out again.
All cables holes have rolled edges, making the grommets superfluous anyway.
While this editor prefers cases without drive doors, it’s difficult to argue against the look NZXT achieved with the front of its Phantom 410. The upper part of the finished system looks brighter than normal for a different reason…
A multi-colored LED fan adds a little visual excitement, brightens up the look of our installed components, and is lit softly enough to prevent annoying distraction. The lighting can’t be disabled, but turning down the fan speed makes it appear dimmer.
Current page: Building With The NZXT Phantom 410
Stay on the Cutting Edge
Join the experts who read Tom's Hardware for the inside track on enthusiast PC tech news — and have for over 25 years. We'll send breaking news and in-depth reviews of CPUs, GPUs, AI, maker hardware and more straight to your inbox.
Add 1TB of Storage to your Xbox with this $125 Seagate Expansion Card
Corsair rolls out cases for motherboards with hidden connectors — 2500D/X and 6500D/X support MSI Project Zero and Asus BTF
AI-generated content and other unfavorable practices have put longtime staple CNET on Wikipedia's blacklisted sources
- Ramlethal why is it between 80 to 120 if the most expensive ones are 410 and stealth priced at 100 ? Reply
19046365 said: why is it between 80 to 120 if the most expensive ones are 410 and stealth priced at 100 ?
- Tschrom Honestly, that's probably still true today, if not even cheaper. You can find good quality Full ATX cases for around $80 now, and to spend that much ($410) on a case is just a waste of money. If you really know what you're doing, you don't need to spend anywhere near that much on a case just to house your components. I'm using a Thermaltake Versa H22 SE, which is pretty small (only a mid-ATX case and cheap at only $40) in regards to cases, yet I am able to keep everything quite cool and even made some manual customizations to the case to ensure everything fits well and works well. And I'm using only Air Cooling. Really the case you use comes down to "do the components fit, and is there adequate cooling". Even then, the cooling part can be adjusted to what is necessary with some manual customizations or even just so much as ensuring that your case fans' CFM is adequate for cooling of your currently installed components (or water, but water cooling doesn't work in my current setup so I have no opinion on that). Reply
- View All 3 Comments
By Ross Rubin December 23, 2023
By Jarred Walton December 22, 2023
By Matt Safford December 20, 2023
By Mark Tyson December 20, 2023
By The Editors of Tom's Hardware December 18, 2023
By Matthew Connatser December 17, 2023
By Andrew E. Freedman December 15, 2023
By Jarred Walton December 15, 2023
By Jarred Walton December 11, 2023
By Matthew Connatser December 05, 2023
By Anj Bryant November 22, 2023
NZXT Phantom 410 Case Review
Posted by Sam Chen | Apr 23, 2012 | Cases , Reviews | 1 |
The Storm Trooper’s Little Brother
While the NZXT Phantom was extremely popular, it was still $129 and it was still a full tower case. While many of us like the unique styling of the case, many of us don’t have the space or the necessity for a full tower case when all that’s going in it is a budget/mid ranged gaming PC. Let’s be realistic here – a single 1TB hard drive, a Radeon HD 6870 and a mATX motherboard isn’t a very compelling reason to go with a full tower case.
Sound like you? Well, NZXT has now released the mid tower edition of the Phantom, the NZXT Phantom 410. From the exterior, the NZXT Phantom 410 looks quite similar to the original Phantom except it’s smaller and is priced at right under $100. The case also includes a couple new updates compared to the original Phantom’s design such as a side panel window to show off your gear as well as USB 3.0 ports. Does it live up to the Phantom name? I sure hope so!
A closer look.
Included in the box, we receive some documentation, all the hardware necessary in labeled packages, and some cable ties. Of course, we also get the case as you’ll see below…
Taking a first look at the Phantom 410, the case is extremely similar to its bigger brother, the original Phantom. The case’s painted plastic and painted steel match very well – something that’s typically difficult to do considering they’re significantly different materials.
Starting at the top right of the case, we get a fan controller with three settings, 2x USB 3.0, 2x USB 2.0, and a headphone and microphone jack.
Here we get buttons for both power and reset buttons along with a large, blue power LED.
At the rear of the top, we get a meshed area, with a 140mm exhaust fan pre-installed underneath. Unfortunately there is no fan filter here.
Similar to the original Phantom, the Phantom 410 includes a cover that must be opened prior to accessing the 5.25″ bays. For those who constantly need access to their 5.25″ bays, this may be a minor annoyance. For those who don’t like front covers in general, this will be a major annoyance.
Moving around to the front, the bottom area is meshed as well with a 120mm fan pre-installed underneath. Unfortunately, there are no fan filters here as well.
As you can see above, there’s a large side panel window on the top third of the case while there’s a large meshed area below with mounting points for a 120mm or 140mm fan for graphics card cooling. Again, no fan filters.
At the rear panel we get the I/O punchout, 120mm fan mount with a 120mm fan installed, 7x expansion slots, water cooling holes, and the PSU cutout as well.
At the bottom of the case, we get a mesh area for the PSU fan, which is filtered (with a very cheap filter), and in front of that we also get a mesh area with mounting points for a 120mm fan. There are also 6x rubber feet on the bottom of the case as well, which help lift the case off the table, reduce the chance of damage to the table/case, and help reduce vibration noise.
Here’s a look at the inside of the case with the sidepanel removed. The interior of the case is also painted white, which is nice considering there’s a window.
Taking a closer look at the 5.25″ bays, we get three of them, all tool-less in design.
Below that, we also get a removable hard drive cage with 4x tool-less trays that support both 3.5″ or 2.5″ drives.
Here’s a closer look at the hard drive cage. These drive trays are made of flimsy plastic, but once a drive’s installed, the drive trays become more rigid.
A Closer Look (Cont…)
Below the removable drive cage, we also get two more drive trays in a more… permanent drive cage.
Here we have all the front panel connectors. As you can see, the fan controller can support up to four additional fans.
Here’s a closer look at the interior of the case around the PSU mount. Another 120mm fan can be installed in front of the PSU as well.
Taking a look at the top interior of the case, we get a single 120mm fan at the rear, a 140mm blue LED lit fan up top as well as another 120mm/140mm fan mount.
Plenty of cable routing holes for cable management here with some of the larger holes having rubber grommets as well, which is a very nice touch. There’s also a giant hole in the back for you to easily install CPU cooler backplates without removing the motherboard.
There’s around an inch of space back here for your cables, so that should be plenty even for the thickest 24 pin cables.
Ripping off the front cover, we can see that there’s a single 120mm fan installed near the bottom front of the case. Another 120mm can be installed here as well, or the 120mm fan installed here can be removed to make room for a 140mm fan.
Once the top cover is removed, you can see that there are mounting points for 2x 120 or 140mm fans. Currently there’s a 140mm blue LED lit fan pre-installed. Also, notice the large amount of space between the chassis and the top cover. There should be sufficient room to place a 240mm water cooling radiator here as well, for those planning on picking up a Corsair H100.
CPU: Intel Core i5 2500K & Phanteks PH-TC14CS Cooler Motherboard: Asrock Z68 Fatal1ty Professional Gen 3 Graphics: MSI Radeon HD6970 + ARCTIC Accelero Xtreme 7970 Memory: 16GB Kingston HyperX Genesis DDR3 2133MHz Boot Drive: Kingston V+200 120GB SSD Storage Drive: Western Digital 1TB Caviar Blue Power Supply: Corsair HX650 DVD Drive – ASUS OEM DVD Drive
Overall, installation on the NZXT Phantom 410 was a breeze. With the exception of the PSU, SSD, and motherboard, installation of everything else was completely tool-less.
While I’m no cable management ninja, this case has plenty of room for your cables. There is very little cabling here to obstruct the airflow of an extra 120mm fan installed underneath.
Installation of our 12.5″ HD6970 with the ARCTIC Accelero Xtreme GPU cooler required the removal of the HDD rack.
Here we’ve got the new Phanteks PH-TC14CS CPU cooler installed, and you can see we have plenty of room for much taller CPU coolers. However, it should be noted that the monolithic Phanteks PH-TC14PE will not fit. (Yes, I tried and I failed.)
Moving around the back, we’ve got a complete mess. Then again, it doesn’t really matter since it won’t be seen, but NZXT has included cable ties for you if you’d like to make them a bit neater.
System fully assembled.
With our test PC, we ran 30 minutes of AIDA 64 Stress Test and Furmark with ambient right around 21c. Overall, temperatures were good as there was plenty of air moving around. Of course, everything was running at stock clocks and the test bench was sporting some aftermarket CPU and GPU coolers, so it’s no surprise there.
For installation, NZXT has really made it easy on us with the Phantom 410. Everything that can possibly be tool-free, is tool-free. All screw types are individually packaged and labeled so you don’t have to go digging through a giant bag of screws to find one. It really does help as most times all we really need from these bags are the motherboard standoffs and the motherboard screws. Additionally, also included are extra thumbscrews in case you misplace a couple. Overall, it’s pretty obvious NZXT has spent a great deal of time making the Phantom 410 a very easy case to work with and for those familiar with PC building, a build into the NZXT Phantom 410 should take no longer than 30-60 minutes.
Performance-wise, I found no issues with the case. The included 2x120mm fans and the 140mm fan up top do a great job of moving the air, with the test system’s i5 2500K at stock clocks sitting at a very chilly 50°c under full load. That said, I do tend to prefer cases with positive air flow instead of negative air flow such as the case with the Phantom 410. Typically I see better temperatures, but more importantly dust is less of an issue. Speaking of dust, one thing about this case is that aside from the cheap PSU fan filter, it doesn’t have any at all. Course, as long as you’re willing to regularly take your PC out and dust it off, it shouldn’t be much of an issue. For a premium case like the Phantom 410 however, I do expect some fan filters and it is quite disappointing that NZXT hasn’t implemented any. (Aside from the PSU fan filter)
In terms of durability, the case shouldn’t have many issues (as many owners of original NZXT Phantom would tell you), but be warned that the top and the front panel of the case is made of plastic. Obviously, it won’t be as durable as some of the SilverStone Temjin series cases out there, but as long as proper care is given, I don’t think this case should have any problems.
Finally, taking a look at the price of the case, it’s currently priced at around $99.99 on Amazon , which is very much in line with other premium mid-tower cases on the market. Some of its competitors include the Cooler Master HAF 922 ($89.00), Antec Nine Hundred ($89.99), and the Corsair Carbide Series 400R ($99.99).
Overall, the NZXT Phantom 410 is a great looking case with plenty of features, plenty of cooling, and plenty of good looks. As the little brother of the wildly popular NZXT Phantom, I approve.
About The Author
Hardware and Technology Enthusiast. SSD Evangelist. Editor-in-Chief.
Best MicroSD Card Review: 12 MicroSD Card Comparison
January 28, 2015
Arctic Cooling MX-4 Thermal Paste Review
December 5, 2011
Sapphire HD7770 GHz Edition Vapor-X Review
May 18, 2012
Review: Creative Sound BlasterX H5 Gaming Headset
January 3, 2016
if you have the budget will you choose this over the Corsair Graphite Series 600T?
Leave a reply Cancel reply
Your email address will not be published. Required fields are marked *
This site uses Akismet to reduce spam. Learn how your comment data is processed .
Stack Exchange Network
Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.
Q&A for work
Connect and share knowledge within a single location that is structured and easy to search.
Where to connect Phantom 410 case cables?
I have NZXT Phantom 410 case, I have connected mostly all the case cables except for those in the image :
I have looked in the case Manual but they don't say anything about these cables, even whats the name or what they do or where to connect them, So hopefully someone here tells me these information because thats my first PC build.
- 1 Those look like splitters for 3 pin fans. – Tim G. Aug 28, 2016 at 17:40
- So I don't need to connect them anywhere ? I have connected the 4pin molex which I believe is the fan power cable – Hussein Reda AlBehary Aug 28, 2016 at 17:52
- 1 I don't think you'll need to. Some fans use a 3 pin connector that would plug into a spot on the Motherboard or into a splitter so you can run more than one fan off that same connection point on the motherboard. It's likely the manufacturer of your case provided those cables for if you needed them. – Tim G. Aug 28, 2016 at 17:55
- Okay thanks, if you are sure of that just post it as an answer and after I run the PC and try I'll mark it as an answer – Hussein Reda AlBehary Aug 28, 2016 at 18:03
- Before that, could you post another picture of the other end of the cable? A few more pictures of the cable would definitely help me. Or is that already being shown in the picture? It's a little hard to tell – Tim G. Aug 28, 2016 at 18:07
So after seeing the picture in the last comment, I'm confident that that is a 3 pin fan splitter. In this case, the manufacture seems to give you the ability to wire fans to one location that is stowed away with where the rest of the wires go (kind of a nice feature!).
At first I did not realize that they were part of the rest of the wires that came with the case. I thought they were separate pieces, like one of these:
3 pin fan splitter
You must log in to answer this question.
Not the answer you're looking for browse other questions tagged cable case ..
- The Overflow Blog
- In Rust we trust? White House Office urges memory safety
- Chunking express: An expert breaks down how to build your RAG system
- Featured on Meta
- Changing how community leadership works on Stack Exchange: a proposal and...
- Our partnership with Google and commitment to socially responsible AI
Hot Network Questions
- Abortion Debate - Should we teach abstinence to adolescents as a preventive measure of unwanted pregnancy?
- graphic design is my passion so you are(is it true?)
- Why most planets remain within a few degrees from the ecliptic?
- How do you find out if you need a permit for a crane near a local airport in Seymore Indiana?
- Converting to a scalar pure function without getting the warning messages
- What is μέγεθος referring to in Jewish War 3.4
- Tennenbaum's Theorem and polynomials
- How much can you compress information?
- Internal angle sum of a triangle
- Great battles in the history of mathematics
- World weavers or something, a double seven child without magic
- ContourPolarPlot or PolarContourPlot?
- Is it bad practice for audio inputs and outputs to share a common ground?
- What kind of drain pipe appears to be clay?
- What’s the smallest sha256 hash that was ever produced?
- Is the ideal airfoil concave on the underside?
- How to receive UDP packet with 127.0.0.0/8 dst address in userspace
- "App not installed as app isn't compatible with your phone" when installing APKs on Android 14
- On what day does a person turn "X years and 6 months" for the purpose of driver licensing in USA states?
- Why is this equation using align* not centered?
- Can a spell cast from a Spellwrought Tattoo be counterspelled?
- Can one get a liquidity premium as a retail investor?
- Egypt 2309-2362
- Location of Soul
- Case Manuals
- Compact Loader
- Repair manual
Case 410 Repair Manual
- page of 41 Go / 41
Table of Contents
- Capacities and Lubricants
- Engine Oil Selection
- Oil Viscosity/Temperature Ranges
- Fuel Storage
- Specifications for Acceptable No. 2 Diesel Fuel
- 1 Table of Contents
- 2 Capacities and Lubricants
- 3 Engine Lubrication
- 4 Diesel Fuel System
- 5 Capacities and Lubricants
- 6 Engine Lubrication
- 7 Engine Oil Selection
- 8 Diesel Fuel System
- Download this manual
- Table of Contents 10
- Section 1001 16
Related Manuals for Case 410
Summary of Contents for Case 410
- Page 1 REPAIR MANUAL SKID STEER/COMPACT TRACK LOADER 420CT SERIES 3 87634765 NA Issued 01Jan08...
- Page 2 REPAIR MANUAL REPAIR MANUAL SKID STEER/ SKID STEER/ COMPACT TRACK LOADERS COMPACT TRACK LOADERS 420CT 420CT SERIES 3 SERIES 3 87634765 NA 87634765 NA 1. Trim along dashed line. 1. Trim along dashed line. 2. Slide into pocket on Binder Spine 2.
- Page 3 Tab 2 Section Index - Engines 6-79051 Engine and Radiator Removal and Installation 2000 6-79130 Engine and Radiator Removal and Installation (410 Tier 3 Engines) 2000 5-7650 Engine and Radiator Removal and Installation (420/420CT Tier 3 Engines) 2000 5-7660 For Engine Repair - See Engine Repair Manual...
- Page 4 410/420 SKID STEER AND 420CT COMPACT TRACK LOADER Repair Manual Mechanical and Pilot Control Machines (Tier 3 and Cab Up-Grade Machines) Bur 87634765 Table of Contents (Continued) Publication Description Section Number Form Number Power Train Tab 6 Section Index - Power Train 6-79081 Hydrostatic System”How it Works”...
- Page 5 410/420 SKID STEER AND 420CT COMPACT TRACK LOADER Repair Manual Mechanical and Pilot Control Machines (Tier 3 and Cab Up-Grade Machines) Bur 87634765 Table of Contents (Continued) Publication Description Section Number Form Number Mounted Equipment Tab 9 Section Index - Mounted Equipment...
- Page 6 410/420 SKID STEER AND 420CT COMPACT TRACK LOADER Repair Manual Mechanical and Pilot Control Machines (Tier 3 and Cab Up-Grade Machines) Bur 87634765 Table of Contents (Continued) NOTES Bur 6-78992 Revised 12-07 Printed in U.S.A. Find manuals at https://best-manuals.com...
- Page 7 SECTION INDEX GENERAL Section Title Section Number Fluids and Lubricants ..............1001 Fluids and Lubricants - Tier 3 Engines .
- Page 8 Find manuals at https://best-manuals.com...
- Page 9 Section 1001 FLUIDS AND LUBRICANTS Copyright © 2006 CNH America LLC CNH AMERICA LLC Printed in U.S.A. 700 State Street Racine, WI 53404 U.S.A. Bur 6-79031 Issued February, 2005 (Revised March, 2006) Find manuals at https://best-manuals.com...
Page 10: Table Of Contents
Page 11: capacities and lubricants, page 12: engine lubrication, page 13: diesel fuel system.
- Page 14 1001-6 NOTES Bur 6-79031 Revised 3-06 Printed in U.S.A.
- Page 15 Section 1001 FLUIDS AND LUBRICANTS Copyright © 2007 CNH America LLC CNH AMERICA LLC Printed in U.S.A. 700 State Street Racine, WI 53404 U.S.A. Bur 5-7580 Issued December, 2007...
- Page 16 1001-2 TABLE OF CONTENTS CAPACITIES AND LUBRICANTS ............. 3 ENVIRONMENT .
Page 17: Capacities And Lubricants
Page 18: environment, page 19: engine lubrication, page 20: diesel fuel system.
- Page 33 Engine and Radiator Removal and Installation (410 Tier 3 Engines) .......
- Page 35 Section 2000 410 ENGINE AND RADIATOR REMOVAL AND INSTALLATION Tier 3 Engines Copyright © 2007 CNH America LLC CNH AMERICA LLC Printed in U.S.A. 700 State Street Racine, WI 53404 U.S.A. Bur 5-7650 December, 2007...
- Page 36 2000-2 TABLE OF CONTENTS RADIATOR ................3 Removal .
- Page 37 2000-3 RADIATOR Removal STEP 6 NOTE: Put caps on all fittings and plugs in all disconnected hoses. STEP 1 Park the machine on a level surface. STEP 2 Lift the hood and open the rear access door on the machine. STEP 3 BD07M176-01 Turn the ignition switch and the master disconnect...
- Page 38 2000-4 STEP 9 STEP 12 BD07K011-01 BD07K006-01 Loosen the clamp (1) on the upper radiator hose and Remove the cap (1) from the hydraulic reservoir. remove the hose from the upper radiator connection. Connect a vacuum pump to the hydraulic reservoir. Start the vacuum pump.
- Page 39 4. LOWER RADIATOR HOSE 12. FAN GUARD 5. COOLANT RECOVERY HOSE 13. FAN SHROUD 6. COOLANT RECOVERY BOTTLE 14. SEAL 7. CLAMP 15. RADIATOR CAP 8. LOWER HINGE MOUNTING BRACKET 16. DRAIN VALVE 410 RADIATOR MOUNTING Bur 5-7650 Issued 12-07 Printed in U.S.A.
- Page 40 2000-6 Installation STEP 15 Installation of the radiator is the reverse procedure of removal. STEP 16 After the radiator has been installed, fill the cooling system. See Section 1001 for the correct coolant mixture and quantity. STEP 17 Start and run the engine until it reaches operating temperature and check for any leaks.
- Page 41 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...
This manual is also suitable for:
Rename the bookmark, delete bookmark, delete from my manuals, upload manual.
- Forums New posts Search forums
- What's new New posts Latest activity
- Members Current visitors
- Nvidia's AI customers are scared to be seen courting other AI chipmakers for fear of retaliatory shipment delays, says rival firm
NZXT Phantom 410 Fan Controller
- Thread starter zerrchh
- Start date Feb 3, 2015
- Feb 3, 2015
I have a NZXT Phantom 410 case filled with some hardware I bought from iBuyPower and I am unsure on if the fan controller works. The case comes with a fan controller switch on top if you are unfamiliar. When sliding from (im assuming) low, medium, and high the only changes are the LED strength and its very subtle if anything. The fan's speed does not change. I hear there is trouble with the fan controller on these cases usually and just making sure they didnt mess up or something came loose in shipping (i had it for a few months now though). I think it should be working though because from what I understand the LEDs cant light up unless its hooked up to the fan controller... like if you plug them into the motherboard case fan slots that it will only power them but not the LED. I have no idea on where the fan controller plugs into since I didn't make it myself but if someone could help me figure out where to maybe check plugs to make it work it would be hugely appreciated! The computer is not loud by any means but there's a subtle fan sound always and it just irritates me when I'm recording a video or something and I think one of the fans could be a culprit. Thanks in advance.
- Feb 10, 2015
I have that exact case, personally, I would not use the on-board fan controller, nor would I plug the fans into the motherboard. motherboard control means the use of ridiculous amounts of software, constantly having to be monitored. in my opinion, and what I have done is gotten a NZXT Sentry LX fan controller. It takes up two of the 410's three 5.25 inch drive bays (assuming you have two free), and allows both manual and auto control of the fans. plus each fan can be controlled individually. you can hook up, up to five fans with this controller, which isn't bad. On my setup, I have replaced all of the supplied fans with corsair AF White LED fans for better performance and a quieter PC, but this is down to personal choice. I have two top fans, a rear fan, one side fan and one front fan. front and side as intakes and top sand back as exhaust.
- Feb 11, 2015
Jonzy96 : I have that exact case, personally, I would not use the on-board fan controller, nor would I plug the fans into the motherboard. motherboard control means the use of ridiculous amounts of software, constantly having to be monitored. in my opinion, and what I have done is gotten a NZXT Sentry LX fan controller. It takes up two of the 410's three 5.25 inch drive bays (assuming you have two free), and allows both manual and auto control of the fans. plus each fan can be controlled individually. you can hook up, up to five fans with this controller, which isn't bad. On my setup, I have replaced all of the supplied fans with corsair AF White LED fans for better performance and a quieter PC, but this is down to personal choice. I have two top fans, a rear fan, one side fan and one front fan. front and side as intakes and top sand back as exhaust. Hmm, are they expensive at all because I wouldn't mind swapping it out but I feel like im a bit technically uninclined to adjust all my fans now, and also hook up the new stuff. I mean, i got the bay slots open and im sure its easy to install just a matter of putting it in and putting it to the power supply. but I have my liquid cooling radiator thing hooked up to my back fan. Not sure exactly how to swap them out... very interested though because my back fan (the one thats with the radiator i think) is making a fair amount of noise. It's pretty quiet.. but i mean it could be quieter.
zerrchh : Jonzy96 : I have that exact case, personally, I would not use the on-board fan controller, nor would I plug the fans into the motherboard. motherboard control means the use of ridiculous amounts of software, constantly having to be monitored. in my opinion, and what I have done is gotten a NZXT Sentry LX fan controller. It takes up two of the 410's three 5.25 inch drive bays (assuming you have two free), and allows both manual and auto control of the fans. plus each fan can be controlled individually. you can hook up, up to five fans with this controller, which isn't bad. On my setup, I have replaced all of the supplied fans with corsair AF White LED fans for better performance and a quieter PC, but this is down to personal choice. I have two top fans, a rear fan, one side fan and one front fan. front and side as intakes and top sand back as exhaust. Hmm, are they expensive at all because I wouldn't mind swapping it out but I feel like im a bit technically uninclined to adjust all my fans now, and also hook up the new stuff. I mean, i got the bay slots open and im sure its easy to install just a matter of putting it in and putting it to the power supply. but I have my liquid cooling radiator thing hooked up to my back fan. Not sure exactly how to swap them out... very interested though because my back fan (the one thats with the radiator i think) is making a fair amount of noise. It's pretty quiet.. but i mean it could be quieter. Have a look on the corsair website (follow this link) - http://www.corsair.com/en-gb/cooling/fans the SP fans are best for radiator/heat sink use, and the AF fans for open air cooling, such as front panel cooling (unless the top drive bay is installed), top fans install under top panel so does not involve too much work inside of case, and the fan on the radiator should simply attach to the back of the radiator - depending on your configuration. as for the fan controller, simply plug the Molex cable into the power supply, and then plug the fans you have into the connectors on the fan controller. the fans you use must be three pin fans, four pin fans are not compatible with this controller. then use some electrical tape to place the five heat sensors around the case. Job done.
- Feb 5, 2024
- Aug 5, 2023
- Dec 29, 2023
- Jan 23, 2024
- Nov 26, 2023
- Started by Admin
- Yesterday at 11:10 AM
- Replies: 25
- Started by tecmo34
- Apr 30, 2011
- Replies: 5K
- Started by Rookie6962
- Today at 2:46 AM
- Thursday at 8:15 AM
- Replies: 70
- Feb 25, 2024
- Replies: 121
- Started by XXX MOZZY
- Today at 2:57 AM
- Started by Darkbreeze
- Jan 8, 2018
- Replies: 2K
- Latest: Denam Pavel
- 1 minute ago
- Latest: XXX MOZZY
- 6 minutes ago
- Latest: dwd999
- 14 minutes ago
- Latest: ILI-BIG
- 15 minutes ago
- Latest: madsci3ntist
- 24 minutes ago
- Latest: PellaLive
- 25 minutes ago
- Latest: SkyNetRising
- 26 minutes ago
Share this page
- Cookies Policies
- Term & Conditions