corsair trimaran review

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sails and Rigging
• Maintenance
• Sailing Totem
• Sailor & Galley
• Living Aboard
• Destinations
• Gear & Electronics
• Charter Resources

• Corsair 880: Best Sport Boat
• By Herb McCormick
• Updated: December 8, 2020

On a cold November afternoon, we rolled up to the dock at the ancient Cape Cod Shipyard, hard along the waters of the Wareham River Basin, for the concluding sail of our 2021 Boat of the Year campaign aboard the Corsair 880, a 28-foot folding trimaran built in, of all places, Vietnam. It wasn’t on purpose, but you could easily say we saved the best for last. The best sail in our 2021 BOTY sea trials, that is.

We were joined by Bob Gleason, who’s been peddling fast tris for as long as we can remember, and Dave Reed, the editor of our sister publication, Sailing World : two boys who always can be counted on to press on a bit more sail. In other words, for the task ahead, darn-near perfect companions.

The classic Buzzard’s Bay sea breeze had kicked in, ­appropriately—like, what else is new?—as we powered out of the basin and into the fresh southwesterly. Up went the big, roachy, powerful square-topped mainsail, and out went the self-tending jib. We were sailing.

2021 Boat of the Year Winners at a Glance

• Excess 11: Boat of the Year
• X-Yacht’s X4 0 : Best Performance Cruiser
• Island Packet 439: Best Full-Size Cruiser
• HH 50: Best Luxury Cruiser
• Hylas 60: Best Luxury Cruiser
• Beneteau Oceanis Yacht 54: Honorable Mention
• 5 New Sailboats That Were Nominees

The Corsair 880 is cool, cool, cool. Comfortable canvas bench seats. A nice little interior with all the basics for pleasant camping-­style cruises. A rotating carbon-fiber spar. A tiller with an extension, and the traveler and mainsheet right at hand. Sails up, daggerboard down. As good as it gets.

We tacked upwind for a while to say we did, got some ­numbers, and then the real fun commenced. First, bye-bye jib; hello Code Zero. Welcome to the realm of double-digit boat speeds, which always feel faster when you’re reaching on a screamer under 30 feet. Greetings, sailing world, indeed.

We swapped the helm back and forth, and took snapshots of one another. Who had the biggest smile? It was a tie. Then the kite went up for the run back to the dock. Heaven on Buzzard’s Bay.

There wasn’t another boat around, and for that matter, there wasn’t another boat in the competition that matched up with the Corsair. But you can be sure as heck we were still going to name it the year’s Best Sportboat. Which we could. So we did.

As the sun set over Buzzard’s Bay, it also set on Boat of the Year 2021 . Thanks, one and all, for the memories.

• More: 2021 Boat of the Year , Boat of the Year , corsair marine , multihull , Sailboats , trimaran
• More Sailboats

For Sale: 1983 Little Harbor 44

Sailboat Preview: ClubSwan 28 by Nautor Swan

Sailboat Review: Vision 444

Sailboat Preview: Lagoon 43

When the Wind Goes Light

Sailor & Galley: Ice Cream, Anytime

• Digital Edition
• Customer Service
• Privacy Policy
• Email Newsletters
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Customer Service

• Free Newsletter

Hallberg-Rassy 42 Used Boat Review

Pearson 37 and 37-2 Used Boat Review

DIY Survey Checklist for Used-Boat Buying

Valiant 40: Reshaping the Cruising Hull

Best Crimpers and Strippers for Fixing Marine Electrical Connectors

Thinking Through a Solar Power Installation

How Does the Gulf Stream Influence our Weather?

Can You Run a Marine Air-Conditioner on Battery Power?

Practical Sailor Classic: The Load on Your Rode

Anchor Rodes for Smaller Sailboats

Ground Tackle Inspection Tips

Shoe Goo II Excels for Quick Sail Repairs

Dinghy Outboard Diagnostics

Spring Season Engine Start-Up for Winterized Engines

Solutions for a Stinky Holding Tank

Diesel Performance Additives

Vinyl Boat Lettering DIY Application and Repair

Those Extras you Don’t Need But Love to Have

Hidden Maintenance Problems: Part 3 – Gremlins in the Electrics

Three-Model BBQ Test

Alcohol Stoves— Swan Song or Rebirth?

Living Aboard with an Alcohol Stove

Preparing Yourself for Solo Sailing

How to Select Crew for a Passage or Delivery

Preparing A Boat to Sail Solo

Re-sealing the Seams on Waterproof Fabrics

Chafe Protection for Dock Lines

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

• Sailboat Reviews

The new Corsair is a fast cruising platform, light and bright belowdecks, but with a bit less elbow room than you'd find on a 36-foot monohull, and pricy. For many, these are worthy trade-offs.

Twenty years ago, when Corsair Marine first entered the U.S. market with the F-27 trimaran (which PS reviewed in September, 1990), “family” multihulls were not generally thought to have stellar sailing characteristics. They were difficult to tack. They did not sail well to weather. They required large parking places. In ensuing years, Corsair’s 24- to 31-footers have helped change the perception in the marketplace. These boats are fast, sail well, and are easily trailerable since they fold to 8′ 6″. The major shortcoming has been accommodations that are one cut above camping. The introduction of the Corsair 36 has allowed the company to step into the real world of “cruising comfort.”

Company History Corsair Marine was founded in 1983 by John Walton (of the Wal-Mart family), who envisioned production of a fast, easily trailerable trimaran. A compromise would be accommodations limited by the narrow beam of the main hull.

Walton convinced Ian Farrier, a talented multihull designer, to abandon a thriving practice in Australia, move to California, and execute his vision.

In a morning-long session with PS, Farrier, who sees the world only through multihull lenses, elaborated on the many reasons he considers multis preferable to monohulls, not the least of which is that, “Corsair boats are unsinkable. They have watertight compartments, so even if they pitchpole the crew can crawl inside a capsized hull and have air to breathe and protection from the elements. In a monohull, the crew will most likely be adrift in a liferaft.”

Walton and co-owner Paul Koch, also an Aussie, succeeded, despite the complicated, people-intensive construction process necessary to produce foldable boats capable of withstanding loads endured at sea and on the highway. A by-product was pricing that ratcheted the boat to the very high end of the market when measured on a cost-per-foot basis.

Prior to introduction of the Corsair 36 in February, 2003, the company’s line included the 24-, 27-, and 31-foot models. Boats were built primarily in Chula Vista, California, though the first six F-31s, introduced in 1992, were built at Tillotson-Pearson (TPI) in Rhode Island.

In 1994, Koch purchased Walton’s share and consolidated all of the manufacturing operations at the California plant, where boats are now built.

In its first two decades, Corsair has produced 1,260 boats; annual production is typically 72-75 boats, Koch says.

The 36-footer has been well-received; seven have been ordered since its introduction.

Design Though Ian Farrier is credited with the design of the first three models, and influenced the 36-footer, his affiliation with Corsair ended in the mid-’90s. Paul Koch says that a team of in-house engineers and outside consultants are responsible for the design of the 36.

All of the boat’s design elements— hull, deck, and sailplan—bear a strong resemblance to its predecessors, but the extra LOA allows more graceful lines. Her long, low profile is accented by a downward-sloping cabintop and long, narrow, dark windows. Viewed from the bow, the hull presents a fine entry. The amas also have a fine entry, and near-flat sheerline offset by very round shapes and downward curving bottoms.

However, the new model adds enough load-carrying capability to provide creature comforts suitable for extended cruising. She’s only 900 pounds heavier than the F-31, and performs as well under sail.

All of the Corsair boats, when folded, have the appearance of a giant Daddy Longlegs. The 36-footer also features a tilt-up rudder and shallow draft that allows her to anchor in less than two feet of water, or sail onto a beach. In tight quarters, she can be folded when at anchor.

With a folded beam of 9′ 10″ she’s wider than other models, so owners may be required to secure wide-load permits in some states. To assist owners in avoiding the expense of acquiring a trailer ($7,638), and, perhaps, more powerful tow vehicle, the company has organized fleets of truckers that transport the boats for $1.50 mile, including the cost of a driver.

After the introduction of hull #1 (the boat we tested), input from dealers and consumers at two boat shows brought about a few design modifications and refinements.

Deck and Rig Layout The organization of spaces and layout of gear on the C-36 is almost a carbon copy of its predecessors.

The cockpit is as big as those on monohulls of about the same LOA—wide enough to seat a crew of 4-6 comfortably, and narrow enough to allow a shorthanded crew to work large headsails. The regular cockpit seats are well-proportioned, and there’s additional seating set into both sides of the stern pulpit. These mesh-bottomed seats are good places to be while underway, since they’re elevated, clear of the action, and softer to sit on than fiberglass.

The cockpit is enclosed by a pulpit, and the path forward is atop the cabin or on the trampolines, so a certain amount of agility is required to move forward when necessary. Because of the narrowness of the main hull, shrouds are located on the amas, not close at hand, and the deck is devoid of handrails and lifelines. The trampolines fitted between the hull and amas provide a sturdy, though bouncy, platform.

Corsair outfits boats with high-quality hardware. On the 36, all of the deck gear, including winches, is supplied by Harken or Spinlock.

In its standard configuration she is fitted with Harken B40 self-tailing winches on the cabin top, two Harken B42.2 winches in the cockpit, and two Harken B32.2 self-tailing halyard winches on the mast. Working halyards at the mast instead of leading them aft to the cockpit makes sense, according to multihull sailors, because multihulls sail flatter, and a walk to the mast and back doesn’t present as much of a challenge as it does on a heeling monohull. It also reduces cockpit clutter and friction.

The mainsheet is located at the end of the boom and led to a Harken traveler track that spans the stern, an arrangement that produces excellent sail shape, allows the helmsman to trim the sail, and also reduces the amount of clutter in the cockpit. The system is fitted with a Harken Big Boat Series double-block and tackle led to cockpit winches.

To maximize performance off the breeze, a spinnaker control kit ($3,720) adds two winches in the cockpit, carbon fiber bowsprit , and sheets, blocks, control lines, and cleats necessary to complete the installation.

Corsair is constructing aluminum masts at its factory from extrusions produced by Sparcraft. Our test boat was equipped with a double-spreader rig with swept spreaders and stainless steel wire rigging. At the time of our test, Koch was considering replacing the double spreaders with singles, because, “the second set was redundant.” He has since made that change.

The standard rig is a 3/4 fractional. With the addition of spinnaker gear and bowsprit, a second stay is attached to the mast approximately one foot higher and terminated near the end of the sprit.

The rotating mast is deck-stepped on a ball atop a Delrin bearing that allows it to rotate 45 degrees. Its movement is controlled by a block and tackle arrangement and stainless steel ring on the aft side of the mast. The result is a significantly more aerodynamic presentation of the mainsail to the breeze, which translates to acceleration and speed when sailing to weather or on a reach.

Two steps on the stern provide access for swimmers. Since the rudder is transom-hung, an outboard is located off-center in a hull recess.

Belowdecks When Corsair stretched the F-27 to 31′, owners were rewarded with living spaces large enough to be marginally comfortable on an extended trip. With more stretching, the C-36 still doesn’t have as spacious a main cabin as a 36-foot monohull because of her narrow beam—but she closes the gap significantly.

The accommodations are an excellent example of what can be accomplished using fiberglass and other weight-saving materials, since virtually all of her components are exposed. In fact, there’s so much exposed white in the fiberglass and headliner that only the red cushions and cabin sole provide some relief from the brightness. In addition to concealing wiring, the headliner also acts as a sound deadener. It’s stuck to the overhead with hook-and-loop fasteners. We were concerned about sagging, but found it difficult to remove. If the glue behind the hook-and-loop tapes fails eventually, it will be easy enough to replace.

The area is well lit by two ports on each side of the cabin, and light entering from the companionway. Our test boat had hatches only over the head and the forward berth. In subsequent boats Koch has added a third in the main cabin.

Given more volume below, designers were able to increase standing headroom to 6′ 6″. The saloon measures nearly 6′ from companionway to the head on the port side. A proper C-shaped, elevated dining area, also to port, converts to a 6-foot berth, tapering in width from 41″ to 30″. The galley is to starboard, aft of a second settee that can double as a berth for a small person, and the V- berth.

Stowage space in the boat is at a premium. Although the amas have large storage areas for light gear, accessing those spaces can be a pain, as is true on all cruising trimarans.

The dining table is constructed of fiberglass, but finished to give the appearance of a shiny wood grain. Similarly, the vinyl sole looks like teak, but is a lightweight composite that comes with a 10-year guarantee. Since the boat has no nav station, the dining table is a likely candidate. Odds are, the VHF radio will be mounted on the companionway bulkhead, and instruments on the companionway hatch, close at hand to a navigator working below.

The galley on our test boat was equipped with an optional stainless steel, two-burner propane stove, and double stainless steel sink. A clever arrangement is a recessed faucet that pops up when needed. All are mounted in a fiberglass cabinet with a tiny storage area below. An insulated ice box is standard; refrigeration and pressure hot and cold water are available as options.

The head is a low-maintenance, smoothly finished fiberglass pan measuring approximately 40″ x 35″, consisting of a molded vanity/sink combination with a medicine cabinet outboard, toilet, and handheld shower. It will prove functional, utilitarian, and just large enough for average-sized adults. It will not be confused with the space on a typical 36-foot cruising monohull. The head shares space with a fiberglass shell housing the daggerboard. The shell is so well finished and fitted in as to be nearly invisible. (The daggerboard is constructed of balsa encapsulated in fiberglass.)

The V-berth offers accommodations for two in an enclosed area that has a hatch overhead and Halogen lights and ports on each side. The berth measures 6′ 4″ long on the centerline. It’s 5′ wide at the head, and fitted with 4″ thick cushions. The hull liner is a combination of fabric and shiny fiberglass. Storage and a holding tank are under the berth.

A second berth with a queen-sized mattress is located below the cockpit sole. It’s accessed via two hatches aft of the cockpit, in what would be called the lazarette area, or by removing companionway steps. Two ports provide ventilation at anchor. This is the most spacious sleeping area, and will be fun for kids to climb in and out of (especially since it also hosts the transparent escape hatch). However, the mattress will be ruined quickly if people climb down there with dirty or wet deck shoes, and the space will be noisy if used while underway.

A large storage area under the steps provides a bed for an optional diesel engine. In our view, the 20-hp outboard and a solar panel or two will be the better choice. Don’t overburden a butterfly.

Construction The high cost of Corsair’s boats is attributed to several factors, not the least of which are tooling costs associated with a boat that has more than 30 different moldings, including 10 in the deck and hull, and 11 in the areas belowdecks, as well as two amas, four akas (crossbeams), and all the precision-engineered parts that allow the whole thing to be folded up.

In addition, the company uses high-tech raw materials, including vinylester resins, carbon fiber, double-bias fabrics with Kevlar, and a vacuum-bagging and curing process that relies on precise blends of fiberglass, resin, and catalysts.

Since light weight and high performance are closely related, Koch says hull #1 was built to within 200 pounds of her design weight. Subsequent boats have been further reduced by 100 pounds, mostly by eliminating a set of spreaders and their related parts.

The lamination schedule consists of a layer of NPG gelcoat, a skin layer impregnated with vinylester resin to prevent blistering, and multiple layers of uni- and bi-directional fiberglass. Kevlar is laid in high-stress areas on the bottom, daggerboard trunk, and at bulkheads.

Akas are constructed of layers of fiberglass, carbon fiber, and foam, which increases stiffness. Additional strength and buoyancy in the amas is afforded by watertight bulkheads.

Performance PS editors have sailed most of the Corsair boats over the years, often in racing conditions, and can attest to their speed under sail and their strong construction. This time, we wanted to see if the company could add creature comforts without compromising performance.

Koch’s hopes were for a 15-knot cruiser. “I was surprised,” he told us, “when she sailed at 20 knots during early testing of a prototype in Australia.”

Aside from the long waterline and low wetted surface of the main hull, and the light overall weight of the boat, the biggest contributor to performance is the rotating mast, which supports a square-topped, full-battened mainsail with oversized roach. The advantage of the rotating mast is that it presents a clean, aerodynamic shape to the wind, as opposed to the slab of aluminum of a fixed spar. As we learned during our day-long test sail, trimming the main involves driver and trimmer coordinating their point of sail and mast position. In heavier air, “de- rotating” the mast brings it closer to the apparent wind, flattening the mainsail, and spilling wind to prevent heeling.

We sailed on Biscayne Bay in winds that built from 5 to 15 knots. We had a crew of six—one crewmember stretched out on the V- berth, another snoozing on the trampoline, and four of us trimming sails.

Several manufacturers were testing their new products to see how they performed, using a two-year-old Corsair F-31 as the rabbit. Koch’s goal was to compare the performance of the old and new boats.

From a mechanical standpoint, the boat is easily managed from the cockpit, except that the main is hoisted at the mast. The genoa is on a furler, and main and jib sheets are close at hand.

With Steve Marsh of the Finish Line, a dealer in Stuart, at the helm, we sailed close-hauled in 8-12 knots of wind with boatspeed consistently registering 8-10 knots. She sailed higher and tacked faster than other boats in the fleet, and as quickly as the F-31. She seems to pivot on her daggerboard, and tacked through 95-100°.

When the wind angle moved deeper than 35°, we hoisted a “screacher,” essentially a high-clewed, 180% drifter, and speed increased to 12-15 knots. She heeled 5-10°, carving through a modest chop on the surface. Performance in these conditions was as good or better than the F-31.

The sheeting angle of the headsail is adjusted via a canvas strap attached to the hull beams. It allows the clew position to be moved in and out, much like a barberhauler.

As the wind backed, we punched through small swells by elevating the height of the screacher tack, easing the tack line from the cockpit.

A big difference between monohulls and multihulls is that when a puff hits, most monohulls will use up some of that force by heeling to it, while a good multihull will stay firmly on its feet and use the force for acceleration. The C-36 does this admirably.

Steering through a jibe with a screacher on the sprit-equipped boat is challenging, since the screacher moves between forestay and furler. Once the boat is headed dead downwind and the boom centered, the jibe is completed by quickly turning to weather to fill the sail while the crew tensions the new sheet and the mainsail is eased.

The boat moved easily through the harbor at 5-7 knots with the quiet 20-hp. four-stroke outboard.

Price The current base price for the Corsair 36 is $199,000, including the 20-hp. motor, FOB Chula Vista. In reality, a well-equipped boat will cost closer to $215,000-$225,000, including sails and trailer ($7,638) but without race gear or spinnaker. Options include the propane stove with hot water system, ($875); pressure water ($2,275); Standard Eclipse VHF radio and antenna ($645); spinnaker control kit ($3,720), and screacher controls ($1,969), which require the spinnaker controls.

Conclusion When we first examined Corsair boats years ago, it was with a skeptical eye. While sailing characteristics weren’t questioned, folding tris are complex. We worried about the lightweight construction methods and durability; the toughness of the ama-aka combination; viability as a trailerable vessel, and high price.

Time has alleviated most of those concerns, even the ones about cost, because, in this case, you’re paying for things that work.

The C-36 is certainly fast. Not many boats this size, even other multihulls, will cruise easily at 12-15 knots. She’s also versatile. Her shallow draft offers opportunites to picnic on the beach, or anchor close to shore, away from the mooring field, and yet her foldability means that she can hover in crowded areas when necessary. And she can be towed down the highway for cruising or racing far afield.

Corsair says the boats can be rigged, unloaded, and ready to sail in an hour. Based on real-life observations, we think the time will vary with the size and physical prowess of the crew.

Cockpit seating is large enough to seat six comfortably underway or at the dock. Down below, it’s bright and clean-looking, but creature comforts don’t compare in size or appointments to a middle-of-the-road 36′ monohull equipped with nav station, wine rack, and entertainment center—if that’s your bag. On this boat, the entertainment is found underway.

The high initial cost for trailerable folding trimarans tends to produce sticker shock, since a similar-sized monohull can be purchased for 25% less. On the upside, well-maintained, newer used tris are selling for 75-85% of their original price.

This new boat will appeal to sailors who prefer sleekness and speed to “cushiness,” which is not the same as “comfort.” Aboard boats, comfort is linked to function, and by that definition she’s comfortable enough.

Contact – 877/FASTTRI, www.corsairmarine.com

RELATED ARTICLES MORE FROM AUTHOR

Leave a reply cancel reply.

Log in to leave a comment

Latest Videos

Hanse 410: What You Should Know | Boat Tour

Sailboat vs Fishing Boat – Rules of the Road

Catalina 445: What You Should Know | Boat Review

How to Wax and Polish Your Boat

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

• AROUND THE SAILING WORLD
• BOAT OF THE YEAR
• Email Newsletters
• America’s Cup
• St. Petersburg
• Caribbean Championship
• Boating Safety

Corsair 36, Fast Cruising Tri

• By John Burnham
• Updated: June 7, 2005

What I thought was the weirdest thing about the boat at first turned out to be one of its outstanding features. The Corsair 36 has a stern deck at the back of the cockpit with two large bench seats made of mesh and stainless steel tubes, and they looked bizarre. But after a day or two of cruising with my wife and three daughters, I looked at those seats with complete appreciation. They were the most coveted, comfortable places from which our crew would sunbathe, snooze, and read. If I was lucky, sometimes I even got to sit in one to steer.

I’d been looking forward to cruising on Corsair’s new flagship and comparing it to our experience on the 31 a few years earlier ( “It’s Not All About Speed,” March ’01 ). Like the 31, the 36 is built with a vacuum-bagged foam/glass sandwich laminate, plus carbon and Kevlar reinforcing. The beams are made entirely with carbon, and the overall weight is a little over 2,000 pounds more than the 31. With 817 square feet of upwind sail area, the tri was fast-roughly as fast as the 31, but without the same twitch in the gut when it accelerated. Under main alone we broad-reached across a windy Vineyard Sound doing a relaxed 12 knots. Later, on a beam reach in about 12 knots on Narragansett Bay, with my 12-year-old daughter steering (one hand on the tiller extension, one hand holding a book), our speed jumped from 11 knots to 15.3 as I trimmed in the main and the sprit-mounted genoa (known as a screacher). And when I crewed in a local race with Multihull Source dealer Bob Gleason, we saw 17 knots on a tight reach. I’m told that reaching speeds in the low 20s are common, but what impressed me most was the light-air trip we made from Martha’s Vineyard, to Jamestown, R.I., in seven hours-40 miles upwind. To me that’s the big benefit of a boat like the 36; you can sail it quickly and quietly, eating up the miles while others are going no faster under iron genoa.

Because of its larger accommodations, compared to the 31, the 36 got the thumbs-up from my daughters. But it’s still a trimaran with a relatively skinny main hull; that’s the price you pay for speed. The narrow waterline reduces storage, but the hull flares outboard above the waterline, which provides room for an enclosed head on one side of the daggerboard trunk, as well as the dinette, which converts to a small double berth. There’s also a small galley area to starboard with a sink and two-burner alcohol stove.

On our boat, the fridge had been removed and an Igloo cooler was used in place of the bottom companionway step; but the standard configuration has a 12-volt fridge to port, just forward of the dinette area. An option is available for a propane-fired stove and propane on-demand hot water. There were five of us aboard, with two girls in the forward cabin, one in the dinette double, and the adults in the aft double, which is reached by lifting part or all of the stern deck at the back of the cockpit. We loved sleeping in that wide aft berth, although getting in and out required agility, and changing clothes in there was like dressing inside a tent. We decided if there were a follow-up cruise, we’d claim the forward cabin and move the girls aft.

Despite the constraints of the interior, the on-deck living spaces are expansive. With amas and trampolines to port and starboard, a small foredeck, plus the stern seats, any of the five of us could escape the others when we felt like it. We could easily carry our tenders-single and double kayaks lashed between the forward and aft beam on one side-and the large-volume outer hulls had plenty of room for storing anchors, paddles, even garbage. On the foredeck and forward beam, we found plenty of room to take solar showers and/or have some fun by dashing outboard and swinging off the spinnaker halyard. Speaking of solar devices, a flexible solar panel lived on the cabintop or port netting and provided an all-day trickle charge to our batteries.

The 36 we sailed was one of the first built, and while we were racing in hard reaching conditions, we heard a crack at theinboard end of the forward beam. Installed under the beam’sinboard end was a fiberglass block that gives a tight fit for the beam after it’s unfolded and bolted to the main hull. “The block we made,” says Paul Koch, Corsair’s president and design team member, “wasn’t up to the job. We’ve replaced it on all boats with a stronger aluminum casting.” Hull No. 8 is under construction at press time.

Overall, I liked the boat’s sailhandling systems-a full-length traveler across the stern deck and pairs of winches for main, jib, and screacher or spinnaker. While racing, I went forward to help with the asymmetric spinnaker and found that it was too big for me to take down to windward unless the skipper was willing to bear off. (For some reason he wanted to keep sailing toward the mark, so we dropped it to leeward instead.) But while cruising, the combination of the roller-furling headsails (jib and screacher) and a mainsail equipped with lazy jacks and jiffy reefing made sailhandling easy.

It was tough to balance on the boom to remove the full-length batten in the square-top mainsail, and I figured that was another small price to pay for performance. I learned later from sailmaker Dave Calvert that a quick-pin on a new Tides Marine batten-car design now releases the head so the batten can lie flat along the boom. Under power, with a 15-hp, long-shaft, four-stroke Honda, the 36 moved well and steered easily thanks to a small bar that is dropped into place to link the top of the engine and the outboard, kick-up rudder. An electric starter and power tilt made getting underway simple.

Compared to other Corsairs, which go on and off their trailers quickly, the 36 is a much more substantial boat. It’s considered a “transportable,” not a “trailerable” boat, in the sense that it’s not the type of boat you’ll launch for a quick afternoon sail. Except when traveling to new sailing areas, it will probably live on the end of a dock or a mooring-or in about five minutes it can also be folded up to fit in a slip. Manufacturer estimates for stepping the mast and launching are about two hours.

If your kids like to read and swim and you like to sail from harbor to harbor-whether at 17 knots in a breeze or 6 knots in light airs, go for a test sail . With a few agile, fit crewmembers to manage the spinnaker, you can race it hard as well. Whatever you do, don’t let the funky bench seats put you off.

Corsair 36 LOA 36’0″ LWL 35’0″ Beam (overall) 25’7″ Beam (folded) 9’10” DSPL 5,500 lbs. Draft (hull only) 1’8″ Draft (daggerboard down) 6’0″ Mast length 47’6″ Sail area 817 sq. ft. (1,084 w/screacher) Base price $208,000 www.corsairmarine.com

• More: Corsair , Sailboats , Trimaran
• More Sailboats

Nautor Swan Has A New Pocket Rocket

Pogo Launches its Latest Coastal Rocket

A Deeper Dive Into the Storm 18

2024 Boat of the Year Best Recreational Racer: Z24

McKee’s Six Golden Rules

Kaczor’s Tartan 10 Erica Wins Regatta Series Chicago

Distance Racers Play Wind Roulette at Regatta Series Chicago

Thrilling Big-Breeze Start to Regatta Series in Chicago

• Digital Edition
• Customer Service
• Privacy Policy
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

• 0 No item in your cart
• The magazine

Current issue

• All the issues
• My magazines
• Technical specifications
• Multihull of the Year
• Classified Ads
• Destinations
• Online store
• All the magazines
• Subscriptions
• Accessories

Corsair F-28

The F-28 test took us to Saint-Malo (Brittany, France), where we met Guy Albaret, director of La Landriais Marines Services shipyard, which imports the Corsair trimaran line into France. The F-24, F-31, and now the F-28, designed by Ian Farrier, are made near San Diego, California. We may find ourselves, along the French coastlines, crossing, or perhaps being passed by one of the 35 Corsair F-series trimarans sailing there regularly

A small trimaran for having fun and enjoying your sailing…

Practical info

• Builder : CORSAIR MARINE INTL
• Finance your Corsair 28
• Articles about the Corsair 28

Boat Test price 5.00 € Inc. tax

Add several tests to your cart

and get an extra discount!

A Real Trailerable Multihull

In fact, the F-28's true role is to succeed the F-27, 450 of which were built. At first glance, you might not necessarily spot the difference with respect to any other sports cruising trimaran. There is nothing in the boat’s general appearance to suggest it is a trailerable folding trimaran. A closer look and a demonstration shows that it takes one person alone little more than 2 minutes to fold both cross arms holding the amas, almost effortlessly, so that the F-28 can be trailered easily. Three steps prepare an F-28 for trailering: 1. Releasing the shrouds through a lever system at the base of each shroud 2. Disconnecting the four lock bolts on the cross arms 3. Raising the cross-beams to fold the amas against the hulls very easily thanks to a patented system The side trampolines move with the amas to come alongside the central hull. This is a really surprising operation, except for those already familiar with Corsair trimarans. The F-24, F-27 and F-31 have been using this mechanism for ten years now. This goes to show the reliability, robustness and functionality of the folding system. Consequently, this is a 6 meters wide trimaran tha...

To read in full, Buy the boat test

What readers think.

Post a comment

No comments to show.

MW #196 - July / Aug 2024

Download all the Boat Tests

Over 500 multihull tests

Boat tests from the same builder

• Corsair 880

• Corsair F 27

Place a classified ad Free of charge

on Multihulls World

Boat tests from the same range

• NEEL 43 Performance

• Libertist 853 - Folding Version

• Neel 45 Evolution

Classified ads

BALI 4.2 - 2023 BUILT - FOR SALE

BALI 4.8 - 2020

Vous avez ajouté " " à vos favoris., vous avez supprimé " " de vos favoris., in order to add this article to your favorites, please sign in..

• Corsair 880 Trimaran | Successful Australian Debut at the 2022 Sydney International Boat Show
• Corsair 880 Trimaran | 2022 Boat Review by Multihulls World
• Corsair 880 – Drive Out, Fold Out, Thrill Out, Chill Out
• Australian Debut of the Corsair 880 at the Sydney International Boat Show
• Corsair Regionals 2022 Recap
• Corsair & Seawind Pittwater Regatta 2022
• Düsseldorf Boat Show 2022 Cancelled
• Corsair 880 Trimaran 2021 Review by SAIL Magazine
• Seeing Triple – Multihull Trimarans Redefine Sailing With Speed & Agility
• The current situation at Corsair Marine Covid-19 status in Vietnam As of Aug 3, Vietnam’s Ministry of Health documented a total of 165.339 cases of COVID-19 and 100.293 cases in Ho Chi Minh City (where we are located) with an increase over 3,000 cases per day. However, 46.965 of the total patients have recovered and have been discharged from hospitals. Since […]
• Trimaran Buying Tips: Choosing a trimaran that fits your needs
• How To Set Up A Cosair Trimaran
• The Corsair Nationals 2021 – Once again a huge success to the trimarans community!
• Corsair Nationals in Sarasota Florida, March 5-7, 2021
• Corsair 880 Trimaran COMPLETE TECHNICAL TOUR
• Corsair Nationals 2021 will be hosted by Sarasota Sailing Squadron in Florida, USA
• The Corsair 760 offers better performance and versatility
• 5 Reasons Why the Corsair 880 Won Cruising World’s Boat Of The Year 2021
• Corsair 880 To Be 2021 Best Sport Boat Of The Year By Cruising World
• Corsair 880 Interior

Richard Ward

Managing Director

General Manager

Lucas Authier

Production Manager

Danny Searle

Lamination Manager

Kevin Landry

Fitout Manager

Stefan Malin

SW1600 production manager

James Sganzerla

Technical Manager

Customer Service Manager

Customer Service Representative

At Corsair Marine, we are always trying to improve our boats and ensure our owners experience is top quality. As such, we welcome any input from our customers.  Should you have any queries, issues or thoughts regarding improvements to the boat and our service please contact us on the customer service hotline below:

Corsair Customer Service Team

E-mail : [email protected]

PH: +84 2838 733 630

WHAT OUR CUSTOMERS SAY

Corsair produces one of the best sailboats and Steve Marsh matches or exceeds all the expectations with fair pricing and personalized service. Over the last few years, he has helped us countless times with questions about our boat, as well as sailing. His dedicated commitment to customer satisfaction has developed into a trusting and lasting friendship.

We have owned and raced a Corsair all around Florida for many years. Bought the boat because we thought of it as our "Hobie on Steroids". Fell in love with The Finish Line for their service, advice, fleet support. They wound up being a significant part of the pleasure of owning a Corsair.

I have used The Finish Line as my Corsair resource for over 25 years. I have always received courteous knowledgeable service. Steve Marsh takes the time to carefully evaluate each of my needs and requests The Finish Line team has the ability to fix anything and everything on the boats. I can unequivocally give Steve Marsh and The Finish Line my highest marks for integrity, ability and personal service.

I have owned two Corsair trimarans, both of which are the fastest sailboats I’ve been on. I sailed my F-31R transpacific from San Diego to Honolulu in July of 2019. Super fast, stable, and blue water formidable (even though they don’t formally condone blue water sailing with the F-31). Just be prepared to get wet if there is an ocean swell. I surfed ocean waves for days at a time, maintained average speeds of 17kts with a spinnaker and occasionally hit speeds over 20kts. The people working at Corsair Marine have helped me with paperwork to get my boat USCG documented and assisted me finding parts for my corsair built in 2003 (still going strong!). Corsair’s fold-up on trailers and can be moved to any body of water (55kts over land!). I’ve trailer a corsair from Connecticut to California without a problem. I can’t say enough about how well these boats were designed in addition to their excellent customer support.

hi im am glad your enjoying the corsair . i was bit by the corsair bug back in 2000. i just love my corsair f28 r .hull number 66 full stride.we will be in dunedin clearwater in april 26 to mid may on our windrider 17. we usally clean the bottom once a week before we go out on our corsair. i just got a scrub brush made by ryobi that is waterproof to make the job a little easier. used to just use scotch bright pads to get the growth off