weta 4.4 trimaran

• E: [email protected]
• T: 252-489-3491

No products in the cart.

Weta 4.4 Trimaran Complete

$ 17,332.00

Description

Additional information.

New foam core Weta, ready to sail. Hull color options are White, or Grey. For any different colors or designs we can suggest wrapping the boat.  Includes custom trolley with standard 8″ beach wheels, 8.3SqM pin-head or 9.3 SqM square top mainsail, standard jib, standard gennaker (red, blue, yellow, black, Orange, or Custom).

• Larger 9.3 Sq. meter Square Top Mainsail (Better for winds up to 25 knots and sailing 2-up)
• Self-tacking jib kit (White or to match hull color if ordered with boat)
• Twin Tiller Extension Kit (additional tiller and retention shock-cord system)
• Boat Cover (Standard Waterproof or High UV Resistant)

You may also like…

Comb Helmet (New Product)

Khimera Dual Flotation PFD – Admiral Grey

Set of Ropes for Weta

Related products

Dynamic Beach Wheels Kit

• Privacy Policy
• Returns/Exchanges

East Coast Sailboats, Inc: 104 Shores Avenue, Point Harbor, NC 27964

Tel: 252-489-3491

• All Products

• WETA 4.4 TRIMARAN COMPLETE

$ 17,815.55

4 in stock (can be backordered)

Description

Additional information.

• Reviews (0)

New foam core Weta, ready to sail. Hull color options are White, Grey, Blue, Yellow or Orange hulls Includes custom trolley with standard 8″ beach wheels, 8.3SqM pin-head or 9.3 SqM square top mainsail, standard jib, standard gennaker (red, blue, yellow, black, Orange, or Custom). Please contact for availability. Must be quoted.

• Larger 9.3 Sq. meter Square Top Mainsail (Better for winds up to 25 knots and sailing 2-up)
• Self-tacking jib kit (White or to match hull color if ordered with boat)
• Twin Tiller Extension Kit (additional tiller and retention shock-cord system)
• Boat Cover (Standard Waterproof or High UV Resistant)

There are no reviews yet.

Be the first to review “WETA 4.4 TRIMARAN COMPLETE” Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Weta Wiki Home / Weta Wiki

We recommend reading the Weta Manual and other documents available from the Owners section of the Weta Marine website .

The Weta is a 4.4 meter fibreglass/foam composite trimaran with a boomless main, jib and roller furling gennaker. It can be sailed single handed or with up to three adults. When rigged it has a beam of 3.5m, but when put away on its beach trolley the beam is just 1.7m.

Manufacturing

Initially the boat was manufactured in New Zealand but volume production difficulties and high costs led Weta Marine to move production to Land & Ocean Composite Product Co Ltd. in China.

In August 2014 production was switched again to Xtreme Sailing Products head-quartered in Singapore (although the factory is at nearby Batan, Indonesia) where the 2015 Weta was produced using a new mould with improvements in the manufacturing process and some modifications to the main hull, amas, fittings and a new sail supplier, North Sails.

In 2017, the hull construction was switched to foam core reducing the weight to the original 120Kg. In 2020 the Self Tacking Jib Kit and Twin Tiller Extensions Kit were made available for new and existing boats. In 2021, the supports for the Self Tacking Jib track were built into the deck molding for new boats.

Distribution

As of December 2022, over 1400 boats have been sold worldwide. Approximately 50% of sales have been made in the USA and just under 33% in Europe. Australia, France and the USA have the largest racing fleets with 22 boats at Weta Fest 2014, Ft Walton Yacht Club FL and 26 at the 2014 French Weta Nationals in Carnac . Over 35 boats are expected at the 2022/23 Australian Nationals. The Weta World Map has locations of most of the Weta owners (that wanted to be included) here .

Weta Marine founders Roger and Chris Kitchen saw a gap in the market for a safe, stable, easy to rig, easy to stow, high performance, recreational family boat. Twenty years ago a variety of surf cats were available but there had been little or no development since then and many sailors were looking for a boat that could be easily handled, single handed, both on and off the water. There was no centreboard yacht available that could be used both by kids learning to sail and adults looking for high performance and thrills.

In 2001 on a trip to France, Roger and Chris were really impressed with the way the French used multihulls in their Learn to Sail programs with 3 young children learning together on a 3.5 m cat. On returning to New Zealand they commissioned a multihull designer (Tim Clissold of TC Design) to sketch up some hull forms that fitted their brief.

They built the first Weta using foam/glass construction and launched it early 2003. The boat had potential but it needed a huge amount of development. Over the following 3 years the Weta underwent trials with many design changes with input from some of New Zealand’s top sailors. The Weta created a lot of interest both nationally and internationally, especially from people who saw it as being a truly versatile family yacht that looked so good. Weta Marine was formed in February 2004 and the decision was made to manufacture the Weta.

2006 was spent setting up a top quality production line in China and sourcing world class components for the boat. The first production Weta was sold in New Zealand in October 2006. 2007 was a time of expansion into a number of overseas markets and there is now a great team of enthusiastic hard-working distributors in Australia, China, France, Netherlands, New Zealand, Sweden, Thailand, UK and USA. Weta 1000 was manufactured in July 2014.

There are a number of people/companies/organisations who have made a significant contribution to the success of the Weta Marine design team. These include:

Mike Bullot, David Charlesworth, John Cliffe, Jason Daniels, Gaastra, Harken NZ, Warwick Kitchen, Land & Ocean, Vince Lettice, NZ Trade & Enterprise, Graeme Robbins, TC Design and Markus Winter.

Yachts & Yachting (UK) 2011

SailWorld (AUS) 2010

MySailing (AUS) 2011

SailWorld (USA) 2010

SailingMagazine (USA) 2010

Sail Magazine (USA) 2009

Multihull Review (UK) 2009

In addition, Weta can now match any RAL-code colour or photo with a 25% deposit and additional charge (depending on the colour) – this excluded dark colours with a Luminosity less than 50 which tend to fade quickly due to UV.

All new boats are supplied with a container of Gelcoat pigment which can be mixed with local clear Gelcoat for repairs.

Colours for boats <#1000 are RAL codes available internationally. “Traffic Red” Red 3020 “Zinc Yellow” 1018 “Yellow Green” 6018 “Signal White” 9003

Colour Changes “Blood Red” to ‘Ferrari Red’ – approx hull #56 onwards “Lemon Yellow: to Warm Yellow – approx hull #150 onwards. “Light Grey” (RAL 7035) to White – in 2013 (hull number?)

A fully revised and updated manual is available in Google Docs format here

Definitions: Mods, TIPs and Notes

There are three information categories used in this Wiki

• MOD: Modifications are changes you can make to the boat to make it easier to sail
• TIP: Things you that might help you in caring for your boat or sailing it.
• NOTE: An important issue that owners should be aware of

Please be aware that many of the modifications suggested may be illegal for racing purposes under the International Weta Class Rules which state:

The original rudder was a foil slotted in a cassette

From ??? this was replaced with the Dotan automatically lifting and lowering rudder

From August 2008 this was replaced with the longer and more sophisticated ‘spitfire wing’ spring strut operated rudder with an elliptical bottom edge.

TIP: Always wash off salt water from the rudder fittings after use. Corrosion of the metal components can occur caused by g alvanic c orrosion between the steel and the carbon fibre. Check any stainless steel components, especially if exposed to seawater, for corrosion on a regular basis.

TIP: The rudder pintle rod used on the Spitfire Wing spring strut rudder can easily fall out if you remove it when the boat is in the water. Better to remove it on land.

NOTE If you need to replace the pintle rod, it can be manufactured from 316 Stainless Steel rod, 210mm x 8mm. The holes for the pin that hold it in place are 5mm from each end and 2.5mm wide. It is recommended to use a stainless steel fabricator as stainless steel is difficult to drill without a drill press and carbon drill bit.

MOD: You can dispense with the rod entirely (especially if you sail somewhere with many sand bars, shallow water or floating obstacles – e.g. jellyfish) which might either damage the rudder or cause it to jump up frequently with the subsequent loss of steering. Just wrap 9mm shockcord around the stock 3 TIMES for the Bungee Auto-Kickup System – details here

TIP: To avoid cracks in the tiller stock after beaching the Weta, always clip the rudder in the up position otherwise the waves can cause damage when they hit the rudder.

MOD: The tiller extension is a little short if you are hiking from the Amas. It can be extended by adding a 6-8 inch/15-20cm rod or carbon tube with a slightly smaller outer diameter than inner diameter (22.5mm) of the original extension. Remove the stopper and rubber grip from the end of the tiller extension. Wrap some tape around your new extension piece and insert it into the original tube so that it fits tightly. Wrap more tape around the join between the old and new sections. Replace the rubber grip on the end and wrap some tape around so that it can’t slip off. Add a bung to protect the end.

MOD: Twin Tiller Extension Kit In 2020 Weta Marine produced a twin tiller extension kit which consists of an extra tiller (shipped in two sections and joined with epoxy) and attachments for the tiller to allow both old and new tiller extensions to be attached either side of the tiller. Also included was a steel ring and bungee attachment which kept the free tiller extension from dragging in the water but allowed it to pivot forward in use. Details here

TIP: You may also find the inactive tiller extension catches on the edge of the tramp – one way to resolve this is to tie the loops on the tramp edge down out of the way and also extend the tiller extension to 2m long. Details here .

MOD: Another alternative is to fit a (Laser-style) traveller bridle which allows the tiller to pass under it and therefore you can keep hold of the tiller through the tack – details here .

Daggerboard

The original daggerboard was replaced with the 42cm/18″longer version with an elliptical bottom edge from August 2008

The original Weta often required a shim or lining of the slot with carpet/neoprene to prevent water from squirting up the slot and causing the daggerboard to oscillate and hum. The 2015 Weta has a reworked daggerboard slot providing a tighter more accurate fit with a “fluffy gasket” to hold it steady and prevent water squirting up it (replacement gasket is available from Weta dealers).

MOD: To prevent the daggerboard from sliding down the slot when partially raised and from sliding out if you capsize. Add a 30cm length of bungee shock-cord to the front handle hold so that the bungee can be looped around the mast and clipped onto itself.

TIP: The trailing edge of the daggerboard can easily get damaged against the back of the slot if you hit the bottom with it down. Glue some thin carpet or neoprene at the back in the bottom of the slot to help prevent damage but try never to approach a beach with the daggerboard half down.

In August 2014 the Weta 2015 was announced with sails supplied by North Sails cut to the same dimensions as the original Gaastra sails. In 2018, The Square Top 9.3Sq M (100 Sq ft) mainsail was introduced which improved performance in lighter winds and when sailing with crew but is still useable up to 25 knots. At the same time the cut of both the Square Top (SQ) and original Pin-head (PIN) mainsail was changed to a modern bi-radial shape compared to the tri-radial original. Also the colour of the sail tapes was changed from black to light blue for improved visibility. Dacron sails are still available. In 2019, the gennaker ripstop nylon supply was switched to Contender Sailcloth which allowed additional colours (Lilac, Orange, Pink).

The original sails were white Dacron but were soon replaced by clear Mylar made by Gaastra (best know for windsurfing sails). The North Sails mylar film is light grey.

Optionally, a Dacron furling jib and smaller 6.5 m 2 mainsail are available. This can be used for sailing schools so that they can still teach comfortably in 20 knots of wind and is also great for lighter sailors so that they too can sail in higher winds whilst using the jib. Dacron sails are used in the “Resort” version of the boat.

Screecher (Gennaker)

Screecher furler.

The original screecher furler was a single pull Harken 163 but it could be difficult to furl in strong winds ( a 1:2 ratio helps ) and after a brief switch to the Ronstan RS006400 furler, this was replaced by the KZ RF200 continuous line furler in April 2011 but this had problems with corrosion of the bearings (although some late models have ceramic bearings). In 2016 they switched to the new Harken 1134 continuous furler but due to increasing costs, Weta switched to the the Ronstan RS006000 furler in 2019. In 2020, this was revised to the Ronstan RS006000A with stainless-steel bearings. This resolves an issue with the furler not spinning easily when moisture penetrated the sealed bearing of the original.

TIP: When furling the gennaker (especially in strong winds) always bear away so the gennaker is largely behind the mainsail and, while keeping tension on the sheet, pull on the furling line – this will ensure a tight furl.

TIP: If your furler doesn’t unfurl fully by pulling the gennaker sheet, or won’t furl/unfurl at the top, the bearing may be gone – if you find it cannot spin the drum freely by hand then it’s most likely corroded internally and you should upgrade to the Ronstan RS006000A or Harken 1134.

TIP: The Ronstan furler is designed to throw the line off the reel when releasing the furled sail and therefore should not have any tension in the tail of the furling lines if you want to take advantage of a quick deploy.

NOTE: Wash the furler with fresh water to remove salt/sand and lubricate with dry silicon spray. Never use a greasy lubricant as this will trap sand.

MOD: The Harken drum furler can be improved with a 1:2 furler line system using a small pulley which greatly improves the unit. See photos here . (Note that the Harken drum furler may fail to furl properly in winds over 25 knots).

MOD: The plastic “shackle” used to attach the foot of the screecher to the furler on early boats is prone to failure under continuous use. It can be replaced with a lashing made from 4mm line.

Gennaker Sheets

MOD: Tapered gennaker sheets can be made for the Weta. It is recommended the tapered/core section measures 100 cm from the inside of the loop to the edge of the jacket/outer casing of the line.

TIP: To prevent the clew of the gennaker or the knot from catching on the forestay during a gybe, i t’s better to attach the gennaker sheets by passing the rope through the eye in the gennaker from the “wrong” side (ie. starboard gennaker sheet goes through from the port side) and then tie a figure 8 knot. Repeat the process with the port gennaker so that it also goes through the eye from the opposite side. This means there is no knot or corner of the sail to get caught on the forestay during a gybe.

TIP: Use a white marker or some tape to mark the gennaker blocks so that you always thread them the right side.

Gennaker Additional Block

MOD: If you find the gennaker too much to hold onto, a factory approved modification is to add an additional block at the front of the tramps. This also has the benefit of bringing the gennaker to the front of the cockpit which makes it less likely to be stepped on in a tack or gybe. More info here .

Gennaker Cleats

MOD: If you reverse the hull tie down cleats at the stern of the cockpit, they can be used to cleat the spinnaker (not recommended for tight reaching in strong winds if you want to avoid a capsize!)

Gennaker Sail Care

To lengthen the lifetime of the sail – and help to keep the shape. It’s recommended to remove the sail from the bowsprit after sailing then lay it on a flat surface and flake it from the bottom up, then loose roll it from the end.

MOD: Consider adding telltales to the gennaker about 2m up and 30cm in, one above the other using something you can see through the cloth (e.g. magnetic tape for light colours, white yarn for dark colours).

TIP: If the telltales stick to the sail when wet try spraying them (and the sail) with silicone lubricant when dry or use Scotchguard waterproofing spray. Try also creating a crease (or tying a knot) in them to avoid a flat surface that can stick to the sail.

TIP: Use magnetic tape or flagging tape (used for marking out building sites) attached to the shrouds as wind indicators which you can see without having to crane your neck to look at the top of the mast.

The mainsail is fully battened and because the boat is never sailed on a deep run does not require a boom. A bolt rope sewn into the luff of the sail is fed into a track which is glued to the 2-section mast. A V-cleat on the front of the mast engages a knot in the Dyneema leader of the halyard to provide a halyard lock at the top of the mast.

Early boats used a wire leader which was prone to failure in strong winds and waves.

NOTE: The main halyard should not be cleated under tension at the foot of the mast as this risks bowing the mast and the top section can break in strong winds (especially sailing 2-up) – use the halyard lock at the top of the mast which allows the mast to bend under stress.

TIP: The SQ 9.3 mainsail can put additional tension on the bolt rope at the foot of the mast because of the top batten and luff curve. To make it easier to raise and prevent it jumping out of the track, don’t tighten the jib or raise the gennaker before raising the mainsail. Lubricate the mast track with dry silicon spray to ease hoisting/lowering the sail.

MOD: If the bolt rope keeps jumping out of the bottom of the sail track, consider replacing the bottom 40 cm with aluminium track from the 29er which allows you to firmly close the slot with a pair of pliers.

Tension In light winds (< 7 knots) you should ease the batten tension to reduce the curve in the sail to ease the airflow and prevent the batten from inverting in a tack. In medium winds (8-25 knots) you should tension the battens for maximum power. In strong winds (25+ knots) you should ease the batten tension to reduce the power in the mainsail.

NOTE: Always leave the mainsail with the battens loose as this avoids permanently stretching the sail.

Tip: When sailing upwind in strong winds (over 25 knots), you should have the mainsheet on tight to help flatten the main but cleating it can make it harder to undo in a gust. The solution is to brace the sheet over the edge of the tramp which means you can easily release it.

The mast is in two sections which are joined by sliding them together. TIP: If the two sections are tight where they join, try dipping one end in some water or spray with dry silicon spray to provide lubricant. TIP Raise the mast when facing downwind or with the bow down on a downward slope as this makes it easier to get it vertical. TIP: A hinged mast step is available from Weta to make raising the mast easier for those who may have difficulty lifting it alone. This can be used with a cradle to allow the mast to be raised without effort. NOTE: The sail-track on the mast is made by C-Tech in New Zealand (details here) and is available from Weta Dealers in 3m sections (7.4 m are required for a complete mast track replacement). To glue the track to the mast, use a adhesive/sealant such as 3M 4200, Fixtech Fix 2 , Selleys Armourflex or Sikaflex 292. Don’t use permanent adhesives such as 3M 5200 because the mast track is prone to wear and sections may need to be replaced in the future.

TIP: If you are unable to source the sail-track from marine vendors, look for Flex-a-rail from sun shade and caravan awning suppliers.

The jib is fully battened with the battens sewn into pockets in the sail. They can be removed/replaced by undoing the stitching at the leach. Replacement battens must be the same as the originals.

NOTE: The jib is attached to the forestay using plastic clips, it may not be possible to attach the bottom clip because of the forestay lashing. The webbing straps which the clips are attached to is 50mm long on the port side and 30mm long on the starboard side.

TIP: If you cannot clip on the bottom clip you can replace it with a velcro cable tie.

TIP: Replacement clips are available from North Sails.

TIP: Jib Sail Care – Fold the top over at the first batten and then roll from the top down. This helps to prevent the bottom curling up.

Self-Tacking Jib

In 2020, Weta introduced the self-tacking jib kit which included a track with supports that could be glued to the deck, together with a 6% smaller sail with a reduced leach enabling it to tack without catching on the mast.

The kit also included blocks to enable the tension of the existing jib sheets to adjust the sheet tension and the position of the clew on the track.

The track support is now built-in to the deck moulding of new boats but adhesive kits are still available for early (<#1000) and newer boats (>#1000).

The benefit of using the self-taking jib is significant for solo sailors as it enables you to make “hands free” tacks and gybes – especially when combined with the twin-tiller kit. For racers, it means you can make faster more accurate tacks and gybes and still maintain your heading without oversteering.

MOD: Crossover Jib Sheets The Weta manual suggests attaching either end of the sheet to the clew of the jib and through the cleats so it loops across the cockpit, but this makes it difficult to adjust the jib once you are on the tramps. Also tying the sheets to the clew with a bowline is risky as bowlines can shake undone in strong winds. In addition, because the attachment point is different each time, it’s hard to have a reference marker on the sheets to gauge how much tension has been applied when trimming.

A solution is to tie a loop in the centre of the jib sheet using a Butterfly Knot and attach this loop to the jib using Soft Shackles (DIY with 1m x 4mm Dyneema) threaded through the clew holes. Then feed the sheet ends through the cleat and across the boat to tie off on the opposite tramp handle next to the shroud.

Soft shackles are light and you can have one in each jib clew hole if you wish. The benefit of having a fixed attachment is that you can then mark the jib sheet with a texter either side where they go through the cleats – giving you an instant setting indicator after you tack and for reaching/beating.

The original forestay bridle was tied to two stainless steel rings threaded through holes in the gunwale and bolted underneath. This has been replaced with a length of Dyneema line passed through the same holes with stop knots beneath the gunwale.

MOD: If you have a boat with steel rings they can be removed and the hole edges smoothed out before replacing with Dyneema.

TIP: The forestay should be tensioned so that the is no slack in the stays attached to the Amas when the boat is on the trolley – and even more in winds above 15 knots.

TIP: It’s worth checking the tension on the forestay again when the boat is in the water before you launch

TIP: Check the Dyneema for wear regularly – there have been a few incidents of failure.

The side stays are adjusted for length by the placement of the pins in the Stay Adjuster.

TIP: The recommended setting is 3 holes from the bottom for winds around 10-15 knots, 2 holes at 15-25 knots, 1 hole above 25 knots (although if sailing with the mainsail alone, move to 5 holes as this makes it easier to tack without the jib).

Mainsheet Block

The block was originally from Harken and was replaced with the Ronstan Orbit Block in ????

Trampolines

MOD: It’s highly advisable to put closed cell foam padding under the outer frame of the trampoline (a camping sleeping mat is ideal) as this makes hiking much more comfortable.

Hiking Straps

The original hiking straps were supplied without a twist in them and anchored in the centre of the tramp using two stainless steel grommets as well as being sewn into a webbing patch. Later boats have a twist in the hiking straps to make it easier to get your feet under them and have dispensed with the grommets.

MOD: If you find that your legs are too short allow you to comfortably sit on the float while wearing the harness then add an additional hiking strap outside of the supplied original (this is allowed under the International class rules).

MOD: To enable you to safely hike from the stern of the boat downwind, add an additional hiking strap between the centre ring and the rear ring on the cockpit floor. Keep it taught by passing it over an additional piece of elastic cord between the mainsheet tension anchor points at the side of the cockpit. A Laser hiking strap is exactly the right length.

MOD: NoodleRaiser™ The hiking straps can be difficult to get your feet under, especially when wearing hiking boots. You can use sections of pool noodle and/or bungee cord to hold the straps clear of the trampoline. – Cut four pieces of 4-5cm/3-4 inch of hollow pool noddle and cut a slice in each one. – Thread the pool noodle pieces onto the front and rear hiking strap sections and position them either side of the anchor point in the middle – Wrap cloth-backed tape or duct tape around them – Get some thin bungee cord (~4mm) and loop a piece of this around each hiking strap section so that it pulls over the pieces of pool noodle and thus pulls the hiking strap sections off the tramp.

Spray Deflectors

There’s no doubt that the Weta is a very wet boat – especially from around 10 knots speed when the spray from the bow goes across the middle of the tramps. So there are only two places to get less wet – hiking out hard or sitting in the middle of the boat.

MOD: An alternative is to fit spray deflectors between the tramp and the bow on either side – but they have to be able to allow water through and also allow you to get into the boat. One Weta owner in the USA has produced plans for a DIY version using tramp mesh  – Rain and Sun in the UK have also produced some ready made .  More info here.

Timeline of Changes

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Customer Service

• Free Newsletter

Affordable Cruising Sailboats, Continued

Maine Cat 41 Used Boat Review

CS 30 Used Boat Review

Hinckley 49 Used Boat Review

Best Crimpers and Strippers for Fixing Marine Electrical Connectors

Thinking Through a Solar Power Installation

How Does the Gulf Stream Influence our Weather?

Can You Run a Marine Air-Conditioner on Battery Power?

Need a New Headsail Furler? Here’s What’s Involved

Master the Sailing Basics: Never Stop Learning the Little Things

How to Mount Your Camera on Deck: Record Your Adventures with…

Un-Stepping the Mast for America’s Great Loop

Sinking? Check Your Stuffing Box

The Rain Catcher’s Guide

How to Change Your Engine Mounts

Keeping Water Clean and Fresh

Vinyl Boat Lettering DIY Application and Repair

Those Extras you Don’t Need But Love to Have

Three-Model BBQ Test

Alcohol Stoves— Swan Song or Rebirth?

UV Clothing: Is It Worth the Hype?

Preparing Yourself for Solo Sailing

How to Select Crew for a Passage or Delivery

Preparing A Boat to Sail Solo

Chafe Protection for Dock Lines

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

• Sailboat Reviews

Compact Weta Trimaran Screeches Past the Big Boys on Biscayne Bay

Mini-multihull with aerospace-like attention to detail fills niche of high-performance day sailor.

The new Weta trimaran is designed in New Zealand, built in China, and imported into the U.S. by Nor Banks Sailing of Duck, N.C.

Photo by Billy Black

When it comes to the pure love of sailing, its hard to beat a small, light efficient boat whose sole mission is to harness the wind rather than provide a home afloat. And now that Hobie and others are moving toward heavy, flexible, roto-molded plastic, and lower performance “beach boats,” its no surprise that a new mini-multihull has come along to fill the niche.

During the few days immediately following the Miami Boat Show in February, Biscayne Bay, Fla., becomes a multihull playground where shallow-draft cats and tris strut their stuff. In a David-and-Goliath replay, the 14-foot-6-inch long Weta trimaran streaked like an agile mouse amidst a herd of elephants. The big cruising cats certainly offer sumptuous accommodations, but they lumbered in the fickle 10- to 12-knot breeze that touched down and lifted off the bays green water. At the same time, the Weta 4.4 scooted off on double-digit reaches, accelerating with each puff, and ghosted through the lulls. If enjoying an active sailing experience on Miamis aquatic frontyard was the plan of the day, the Weta won hands-down.

Conceived in New Zealand by father-and-son team Roger and Chris Kitchen, and designed with collaborative help from a handful of experienced sailors, this elegantly simple and finely built boat is a glowing example of mission accomplished. The company principals, an ex-mathematics teacher and his highly skilled Laser-racing son, bridged both a generation and engineering gap, and came up with the performance boat both had envisioned. The big challenge, however, was in creating a cost-effective boat with the strength-to-weight ratio needed for performance sailing. And a good part of the Wetas challenge was to mate an efficient design concept with the careful use of high-tech and mainstream materials along with exacting composite boatbuilding techniques.

Construction

A carbon-fiber and E-glass tubular framework connects the outer amas to the hull and successfully spreads rig and hull loads. The mast and sprit are also made of carbon fiber, but the light, stiff hull structure, daggerboard, and rudder are built using less-costly E-glass and Divinycell foam. Wetas key to fabrication success stems from the builders aerospace-like attention to detail. Vacuum-bagging and strict resin control results in the elimination of resin puddling and sloppy glasswork in hard-to-get-at areas, and offers excellent weight control. The 220-pound boat is as lean and fat free as a long-distance runner, yet retains the strength and stiffness needed in a high-performance sailboat. These boats are built in China, and they represent a new trend in Asian boatbuilding, an industry once known only for thick, resin-rich laminates and carved teak trailboards.

The deck layout and hardware selection make absolute sense, and show the value of continual input from accomplished small-boat sailors. Not only is there sensible layout of the sheet leads, cleats, and control lines, but all the gear works from either inboard or outboard hiking locations. When you first climb aboard the trimaran, youll find that theres plenty of room for two seated on the comfortable side deck of the main hull, and theres even room for big feet and the mainsheet tail in the full-length cockpit well. Sitting out to windward on the canvas trampoline, the tiller extension and sheet leads make sail trimming and screacher control a snap. Its hard to make a small boat really roomy, but the Wetas wide canvas side deck extension and main hull create plenty of room for a couple and a cooler.

Photo by Ralph Naranjo

The success of this pocket-sized trimaran also stems from its sailplan, a triple threat of main, jib, and easy-handling, furling screacher. The boomless mainsail, made by windsurfer sailmaker Gaastra, incorporates five full tubular battens that control draft and allow the mainsheet to be attached to a well-reinforced clew rather than a conventional boom. Its sculpted foot allows a crew to easily duck under during tacks but still keeps sail area maximized. Gaastra transferred quite a bit of its “go fast” sail shaping into the sailplan, including light tubular batten technology and X-ply and monofilm sail material. The high-tech Gaastra sail package, like the Harken hardware and carbon sprit and mast are all standard, and the result is a package primed for performance.

The upwind sailplan is that of a classic multihull with a big main (75 square feet) and small jib (23 square feet) providing enough drive to make ghosting in light air more than a possibility. Thanks to this efficient sailplan, tight sheeting angle, and a foil-shaped daggerboard, the boat points quite well-more like a one-design dinghy than a multihull. Steer a little wider and the roller furled “screacher” can add a virtual turbo boost. This 60-square-foot gennaker deploys like any roller furler but is trimmed via a single sheet led through both port and starboard leads. As a result, there is much less line to cope with and no sheet tails to drag in the water. To date, the top recorded speed has been 16.5 knots.

The ride is both exhilarating and responsive, sort of like sit-down windsurfing, lots of speed but fewer gymnastics. The helm is fingertip light, and the boats responsiveness takes a little getting used to in order to avoid oversteering. The slight up angle of the amas keeps the windward ama out of the water most of the time, reducing drag. Spray flies, and the boats proximity to the waters surface delivers an enhanced sensation of speed. In a way, it makes sailing more of a contact sport, best suited for warm water and sunny skies. Extending the sailing season means a commitment to good drysuit or wetsuit technology.

Putting the boat away is expedited by the handy beach dolly that comes as a standard component of the new boat. It captures the main hull and locks it in place for quick de-rigging or beach storage. It also eliminates the tendency to scar the hulls by dragging them up and down the beach. Rigging, and its end-of-session reversal, takes less than 20 minutes. This includes assembling the amas and hull, stepping the mast and sprit, and setting the sails. The boats user-friendliness is a tribute to the designers. Whether or not you enjoy multihull sailing, its hard not to give high marks to a well-thought-out sailboat.

RELATED ARTICLES MORE FROM AUTHOR

Leave a reply cancel reply.

Log in to leave a comment

Latest Videos

Pearson 37 & 37-2 – Behind the Curtain

How To Test a Boat Engine

Hunter Legend 35.5 – Behind the Curtain

Whipping Line On Your Sailboat

Latest sailboat review.

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

Yacht Brokers and Marine Services

Grow Your Vision

Welcome visitors to your site with a short, engaging introduction. 

Double click to edit and add your own text.

An exhilarating addition to your lifestyle. Very easy to use and compact to transport. Low maintenance fun for all the family.

https://www.youtube.com/watch?v=dA1mNZ8rD2w

https://www.wetamarine.com/the-boat/

Weta Trimaran 4.4 Meter

Manufacturer : Weta

LOA : 4.4 m

Hull : Fiberglass

Spars : Carbon

Folded Beam : 1.7 m

Beach Trolley Included 

  Wētā North America​

Weta trimaran weta sailboat one design high performance sailing dingy.

Wētā Class North America The Class Association of the Wētā Trimaran

Sailors across North America are excited about the Wētā Trimaran.

Whether racing or day sailing, Wētā Trimaran’s popularity continues to grow.

"CATCH A RIDE"

2024 wcna north american championship, november 8-10, 2024 fort walton yacht club.

New Event Request

All WCNA Events

Event Reports Forum

Upcoming events.

MHRA Santa Cruz Invitational Santa Cruz Yacht Club Santa Cruz, CA  July 13-14, 2024

85th annual one design regatta fishing bay yacht club deltaville, va  july 20-21, 2024, rappahannock rivah regatta 1007 mothershead neck rd farnham, va  aug 23-25, 2024, wcna membership.

Connects you with other Weta owners throughout North America

Provides the structure for Weta Racing and Social Events 

Regulates class rules and maintains one-design practices

Attracts top-notch sailors by upholding high racing standards

Supports this website and WCNA events throughout the year

Includes a Forum of racing tips, event reports, and much more

US Sailing Membership

US Sailing is the national governing body of the sport of sailing. By becoming a US Sailing member, you support the organization that supports the sport of sailing.

Learn More About

US SAILING Membership

Get a $5 discount on US Sailing Membership when you join through the MVP Program using "Weta Class North America". 

WCNA organizes and promotes sailing events throughout the year

SOCIAL  SAILING

Many sailors like to sail the Wētā JUST FOR FUN

The versitility of Wētā makes it perfect for individuals, couples or families

Any time a group of Wētā sailors gather, we call it a SWARM!

Many SWARMs are scheduled throughout the year

Wētā sailors are competitive. 

Racing opportunities for every skill level be it beginner or seasoned competitor.

Champion sailors from many other one-design fleets have moved to the Wētā.

Local sailing clubs host seasonal series racing.

Regional championship regattas and invitational regattas are well attended.

SANCTIONED RACING EVENTS

WCNA National Championship - Held annually at rotating locations throughout the US

WetaFest (Midwinter Championship) - Held annually at Fort Walton Yacht Club, Florida

East Coast Championship - Held annually in the Mid-Atlantic area

SOCIAL MEDIA

Wētā Class North America

Keep up-to-date on the latest Wētā adventures in North America

Get Connected

Wētā Fleets are using WhatsApp to stay in touch.

Learn about last minute sailing, events, new products and much more!

WCNA Forum provides a place to share with other members of the Wētā Community

For Sale By Owner

Event reports, dealer's marketplace, technical advice, general discussions, check out the latest posts, freshwater-only 2012 weta, lightly sailed, many upgrades - $5,900, securing gennaker lead to outer rail of ama, tapered gen sheet.

Join WCNA and Add Photos

• America’s Cup Updates
• Southampton Boat Show
• British Yachting Awards
• Print Subscription
• Digital Subscription
• Single Issues

Your special offer

Weta 4.4 Review

‘Wetapunga’ is the Maori name for a New Zealand insect that looks like a cross between a cricket and a cockroach. Jeremy Evans goes sailing on a new trimaran with the same compact body and long legs…

Roger Kitchen and his son Chris built the first Weta prototype in 2003, having commissioned a multihull designer to sketch hull shapes to suit their brief. They wanted to create a new kind of boat for New Zealand which was easy to store, easy to rig, safe and stable, high performance and suitable for all members of a family to enjoy.

Three years and many design changes later, a production line was set up in China where the Weta is built in foam sandwich construction. Sails by Gaastra and the carbon mast, beams and spinnaker pole are also sourced in China, which helps explain the relatively low cost for a boat packed with carbon accessories. The first production Weta was sold in New Zealand in October 2006, followed by sales in China, France, Holland, Sweden, Thailand and the USA, boosting Weta production to 75 boats in its first year.

Design and rigging

Meade Gougeon, USA sailing legend and cofounder of the West System Epoxy, spotted a Weta 4.4 on a Florida beach last autumn and was so impressed that he now sails his own Weta, which is a handsome accolade from a former ‘Boat of the Year’ judge in America.

The Weta does indeed look different from anything else in the boat park. Imagine a cross between a New Zealand insect and a 60ft racing trimaran, scaled down to the size of a 14ft dinghy. It’s no wider than an average dinghy, sitting on its trailer or in the boat park with floats stowed alongside, but nor is it a hassle to double the width of the Weta in trimaran mode. The floats and carbon cross beams weigh 18kg and slide into sockets, where they are secured by tying a bowline and applying tension through a jamming cleat. This takes about a minute for each side and creates a surprisingly rigid platform — there was no obvious flex when powered up on the water.

The carbon mast slides together in two sections and weighs just 6kg, so no problem popping it up or taking it down singlehanded, using the standard method of attaching shrouds and pulling up/down on the forestay. The Gaastra laminate mainsail slides up the luff track easily, though it took us a few minutes to get the knack of locking the halyard at the top of the mast. This is standard multihull procedure, ensuring there is no halyard stretch when you pull on the downhaul to depower the sail. Pulling on the jib halyard provides tension to prevent luff sag, with the ends of the halyards neatly stowed alongside the mast. Complete rig to water time — or vice versa — should be inside 20 minutes with practice.

The Weta feels quite a bit more chunky to push or pull on its trolley than an average singlehanded dinghy. It also might be handy to have a ‘helper’ for trolley retrieval. The Weta won’t blow over, but it will blow sideways if you leave it unattended on the water for too long.

On the water

Our guest testers were Rollo Pyper and Jeremy Pudney. Rollo races an International 14 out of Itchenor SC, so clearly understands the concept of ‘high performance sailing’. Chris Kitchen had stepped in as Rollo’s crew at the International 14 world championship in New Zealand in 2005, and Rollo was keen to discover how the Kitchen family’s Weta concept had progressed from the 2005 prototype. Jeremy Pudney is a former International 14 stalwart who retired gracefully from dangling on 14s a few years ago and created his own Wind Raider custom trimaran — main hull by Phil Morrison, floats and rig from a Hurricane 5.9, big asymmetric off an International 14. He’s now sold that particular Wind Raider, with the intention of downsizing into something smaller, simpler and easier to handle, which can still provide a good enough blast to satisfy a former 14 sailor who has hit 70 years of age.

Rollo commented that the rig of the Weta looked ‘…a bit small’ but he’s clearly accustomed to the outsize rig of an International 14! The Weta rig appears nicely in proportion to the boat. It also delivered the right amount of power for our test session in Force 3-4 winds — like any multihull, the Weta is made for a breeze when the ‘grin factor’ soon kicks in. In less wind, the Weta may have felt a bit draggy, but it’s still a light boat with an easily driven, super-slim main hull, plus the daggerboard should help it point high enough to spar with most dinghies upwind.

When you launch, the Weta is an easy boat to climb on board because it’s so stable and you can get into the cockpit from the open transom or over the low side. The cockpit is roomy, with enough space for a couple of people. Speaking on behalf of older sailors, Jeremy Pudney would have liked more depth to avoid that back-straining ‘knees-up’ attitude, which you get on all shallow bottom boats when sitting on the side of the hull. Whether this is a concern will depend on personal flexibility levels, and becomes irrelevant when you move onto the trampoline from where most Weta sailing will be done.

You need a bit of a push to get on the tramp, but once out you’ve got a great view of the action and can enjoy what the Weta does best: acceleration! When a gust hits, this little boat really takes off. In an average wind speed of 10-15 knots, with one gust up to 20 knots, the Weta flew along but felt stable and easy to handle at all times. And it was quick. I gybed downwind from Itchenor to Hayling Island SC and then beat back again in double quick time.

Upwind, the Weta felt light, responsive and close-winded, although it always pays to sail free and go for speed with a multihull. Tacking on flat water was quick, precise and worry-free. In waves you may need to take more care to ensure the floats don’t stall the Weta mid-way through the turn. Offwind, you unroll the screecher which is a miniaturised version of the big headsail on an Extreme 40 cat or Orma 60 trimaran. I found the roll-out/roll-up worked really well, taking the normal precaution of sailing deep to blanket the screecher. The only way to sail is on the apparent wind. Yank in the mainsheet, cleat it off and forget it’s there, using the screecher to lead the boat downhill — steer upwind to build power, bear away to blast on the apparent wind, then steer upwind to rebuild power.

Unlike a cat there is no mainsheet traveller, and unlike a dinghy there is no kicker or gnav since there is no head-bashing boom. So you rely totally on the mainsheet for leech and foot tension offwind. If the wind is up, this should not be a problem as you can sheet in tight on the apparent wind, even when sailing deep downhill. But in marginal winds, keeping power in the mainsail will clearly be more of a challenge when sailing offwind.

Gybing was easy during our moderate wind test. The screecher flipped neatly round the forestay every time and the floats prevent any chance of the boat heeling right over, but you can run out of hands when it comes to re-sheeting the jib. That helps explain why Weta sailors leave the jib on shore when sailing in stronger winds. As mentioned, the Weta has impressive acceleration when a gust powers up, so just take care you don’t fall off the back of the tramp. If that happened, the Weta would surely leave you behind!

You need to get acclimatised to sitting out on the trampoline and finding a suitable brace position, which is comfortable for all weathers. The Weta is basically trim forgiving — just slide to the front of the rack for beating and back for reaching when the Screecher will tend to lift the bows. It’s clearly not designed for hiking off the side of the rack, which would be painful, with only floppy footstraps providing limited support on the tramp.

During our test session, the Weta never showed any inclination to bury its bows or capsize. What’s more, we didn’t opt for a capsize, knowing that the Weta would invert and probably shove its mast into the shallow muddy bottom of Chichester Harbour. With a fast flowing tide, that would be a potential recipe for a broken carbon mast. If the worst should happen, it’s some consolation that you are only likely to have to replace one half of your carbon mast!

But Wetas can capsize. The Wetamarine website shows some interesting YouTube high wind antics, featuring a Weta blasting in Force 5-6 winds. The main bow and leeward float submarines on several occasions, but the Weta nearly always recovers and carries on sailing. But when the Weta does capsize, it turns almost immediately upside-down. However, a neat technique that has been developed to get it back up again: that involves unscrewing a hatch in the stern of the nearest float and standing on the float so it floods and sinks, which will flip your Weta to the 90-degree capsize position. Then you can pull the Weta upright on the daggerboard in normal dinghy style.

Weta 4.4 review: Verdict

The first ever New Zealand Weta National Championship was held on Lake Taupo last December, and the first ever European Championship will be held at Muiderberg in the Netherlands from September 26-28. That kind of racing would be fun for both singlehanded and multi-handed Weta sailors, but you could also race against dinghies using a Portsmouth club or trial number, or against cats using the Weta’s SCHRS measurement rating.

The Weta looks good with a choice of green, red, yellow or grey hull colours and the all-Chinese construction appears first class, with carbon and foam sandwich ensuring the Weta is a stiff, lightweight performance boat that should provide many years of good service. The rig also looks great, with Gaastra laminate sails providing a seethrough view and flexible carbon mast ensuring the rig is both light and efficient.

Not everything can be perfect. The spinnaker pole does not retract and could be a worry manoeuvring among tightly packed boats. Jeremy Pudney felt the Weta would be easier to handle with two skiff-style tiller extensions, although my view was that you soon get accustomed to flicking the extension across the new side. Both Jeremy and Rollo had problems with the screecher-furling cleat unlocking at inopportune times, while I found the mainsheet cleat a bit of a fiddle since it tends to waggle around. Other improvements could include a mini-traveller for mainsail leech tension, a self-tacking jib to take the fumbling out of tacks and gybes and decent footstraps for better security on the tramps, all of which would add weight, complexity and cost to the boat.

The Weta has plenty going for it as a somewhat unusual, but totally modern ‘family boat.’ For summer blasting, it’s big enough to take young kids for a ride which will surely put a smile on their faces, and fast enough to ensure that adults or teenagers get guaranteed fun. Optimum conditions should be around 12-20 knots. If the wind is lighter, children will be able to handle the boat. If the wind is stronger, experienced sailors will sheet in and hang on for a memorable and possible topsy-turvey blast. Another potential market is sailors with lower body disabilities who have been looking at the Weta 4.4 with interest.

RELATED ARTICLES MORE FROM AUTHOR

RS21: Rupert Homes tests RS’ latest keelboat

Elan E6 on test: fast short-handed cruiser/racer

Video: Nacra 15 FCS boat test with Chris Rashley and Chloe Collenette

Yachts & Yachting is the leading performance sailing magazine, covering every aspect of the racing scene, from dinghies to keelboats. Our insightful features and stunning photography bring you the inside track on the world’s most exciting regattas together with advice and inspiration from the very best sailors, coaches and industry experts.

• News & Events
• Sailing Techniques
• Event Spotlight

ADVERTISING

© 2024 Chelsea Magazine Company, part of the Telegraph Media Group | Terms & Conditions | Privacy Policy | Cookie Policy

• Wētā in Action
• Where to Buy
• Owners Locker
• News & Events

• Wētā Owners

10 reasons to love sailing your Wētā!

• Incredible stability • High performance - speed up to 20 knots • Simple rig - no boom • Versatility - sail solo or together • Lightweight yet robust • Compact storage • No abs of steel required • Rig and launch by yourself in 20 minutes • Proven New Zealand design • Capsize resistant and easy to recover

The Wētā is a very social boat. So while we are serious about design, craftsmanship, and the materials we use, the objective is fun. Even if you’re racing your Wētā in serious competitions, we want to make sure you’re enjoying yourself. And if you want to introduce kids – or anyone – to the joys of sailing, a Wētā is the perfect boat. Deliberately crafted for stability and versatility, the Wētā is easy to sail with the family. The kids feel safe, and they learn the most important thing about sailing: that it’s tons of fun!

One of the greatest feelings when you’re out on the water in a Wētā is exhilaration. Everyone loves to go fast! An excellent sea boat, a Wētā is built for speed. And it’s built from lightweight, high tech materials, meaning a Wētā is sturdy, stable, but light, ensuring even in gentle winds this beautifully balanced and responsive boat can get some sensational speeds up. With a bit of a breeze on you can reach speeds of 20 knots. Now that’s some serious fun.

Fast and Easy Setup

Lightweight and simple, rig and launch by yourself.

Sail solo or mix it up with the family.

One of the driving aims when designing the Wētā was to build it from materials that were robust, but lightweight, so that a Wētā could be assembled, sailed and rigged easily by one person. The simple but clever custom beach trolley and 6kg, two-piece mast make moving, launching, rigging and storing a Wētā a breeze!

The fun bit – getting out and fast on the water – is easy, too, with the boat designed for ease of handling whether you’re a seasoned skipper or an enthusiastic novice. The three-sail design, boomless rig and minimum control lines mean you can make the most of the wind single-handedly, and even with the family on board, you can tack like a monohull but speed like a multihull, with absolute ease.

And when you’ve had all the fun you can take, everything packs down quickly and easily and stores on a surprisingly small footprint.

A robust and versatile trimaran

Where to buy

Locate a Wētā near you

Info Sheets / Manuals & Guides / Wētā World Map / Wētā News

Go to Weta 4.4 Trimaran, 2010 at [email protected] Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts. Sailboat Guide 2022 Weta 4.4 Trimaran Trimaran almost-new incl. self-tacking jib gennaker trailer & UV-resistant boat cover Description Seller's Description Immaculate Weta (Hull 1343), originally purchased new in March 2022. This almost-new vessel is in pristine condition, having been sailed less than ten times. The boat comes equipped with the highly sought-after self-tacking jib option, featuring a deck-molded track and the furling gennaker. The Weta has been meticulously cared for and maintained with a thorough rinsing, derigging, and covering routine after every use. The accompanying galvanized Road King Trailer has clocked fewer than 50 miles. It comes with a convenient integrated beach-trolley, ensuring a nearly effortless launch into the water. We have decided to sell the boat due to our recent purchase of a Lagoon cruising catamaran, which we sail full time. This provides an excellent opportunity for someone to acquire a like-new Weta at a competitive price. We are offering this package for $16,500, including the boat and trailer. The retail price for this boat configuration, according to the official Weta website, is currently $20,616.64 tax. The total length of boat and trailer (including trailer tongue) is about 18 ft. The width (wheel to wheel) is about 6 ft. The Weta is located in St. Petersburg, FL, and is available for immediate purchase. For inquiries or to schedule a viewing, please contact us at 727-554-2050. Rig and Sails Auxilary power, accomodations, calculations. The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more. Classic hull speed formula: Hull Speed = 1.34 x √LWL Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL Sail Area / Displacement Ratio A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more. SA/D = SA ÷ (D ÷ 64) 2/3 SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay). D : Displacement in pounds. Ballast / Displacement Ratio A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize. Ballast / Displacement * 100 Displacement / Length Ratio A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more. D/L = (D ÷ 2240) ÷ (0.01 x LWL)³ D: Displacement of the boat in pounds. LWL: Waterline length in feet Comfort Ratio This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more. Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 ) D: Displacement of the boat in pounds LOA: Length overall in feet Beam: Width of boat at the widest point in feet Capsize Screening Formula This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more. CSV = Beam ÷ ³√(D / 64) This listing is presented by SailboatListings.com . Visit their website for more information or to contact the seller. View on SailboatListings.com Embed this page on your own website by copying and pasting this code. About Sailboat Guide ©2024 Sea Time Tech, LLC This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.     Beam:  11.5'    Draft:  .5'     Beam:  11.5'    Draft:  1'     Beam:  11.6'    Draft:  2.5'     Beam:  11.5'     Beam:  11.5'    Draft:  0.5'     Beam:  11'     Beam:  11.6'    Draft:  3.6'     Beam:  11' 6'    Draft:  3' 6'     Beam:  11.5' © 2001-2024 ./)   . . ./)   . . 218 COMMENTS Lightweight and simple, rig and launch by yourself in 20 minutes. Fast and easy setup. Lightweight and simple, rig and launch by yourself in 20 minutes. One design class. Wētā has an active strong base of racing fleets across the world. Sails for every wind strength. Redesigned by Norths in 2017, the bi-radial cut mainsails provide manageable high performance in all conditions. Wētā A robust and versatile trimaran. Learn More . Latest News & Events. May 15th, 2024. Neuse River Swarm. June 14th, 2024. Lac de Naussac 7 et 8 Juin 2024. July 16th, 2024. 2024 East Coast Championships. Wētā Worldwide. See where our boats are all over the world. WETA 4.4 Trimaran Dbrd. Rigging Type: Fractional Sloop: LOA: 19.03 ft / 5.80 m: ... Weta Marine: Dealers: East Coast Sailboats: Download Boat Record: Notes. Hull length: 4.4m / 14.42 ft Retracted hull beam: 1.7m / 5.58 ft. Total sail area including main, jib and gennaker: 19.5m2 / 210 sqft 2021 Weta 4.4 Trimaran Seller's Description. 2021 Weta Trimaran. Barely used, new price 19,500. Super stable, easy to sail and incredibly fast. Hit speeds of 20 knots (23 mph). Road King Trailer and beach dolly included. View Wetas in action on Youtube! Amazing design. Advertisement. Weta 4.4 Trimaran Complete Weta 4.4 Trimaran Complete $ 17,332.00. Colour: Clear: Weta 4.4 Trimaran Complete quantity. Add to cart. SKU: 10000F Category: Weta Trimaran Tags: Trimaran, Weta, Weta 4.4, Weta Trimaran. Description Additional information Description. New foam core Weta, ready to sail. Hull color options are White, or Grey. Weta 4.4 Review A detailed review of the Weta 4.4, a compact and high-performance trimaran designed for family sailing and racing. Learn about its features, rigging, performance, pros and cons from the perspective of experienced sailors. Wētā Trimaran Wētā Trimaran. 9.3 m 2 (100 sq ft) [1] (Sq. Top) The Wētā 4.4 Trimaran is a 4.4 metre (14 foot) sailing dinghy conceived and developed in New Zealand from 2001-2006 by Roger and Chris Kitchen and others with original drawings by TC Design's Tim Clissold. WETA 4.4 TRIMARAN COMPLETE WETA 4.4 TRIMARAN COMPLETE $ 17,815.55. Home. Products. WETA 4.4 TRIMARAN COMPLETE. 4 in stock (can be backordered) WETA 4.4 TRIMARAN COMPLETE quantity. Add to cart. SKU: 10000F Category: Weta Trimaran. Description Additional information Reviews (0) Description. New foam core Weta, ready to sail. Hull color options are White, Grey, Blue, Yellow ... 2021 Weta 4.4 Trimaran sailboat for sale in Missouri 18' Weta 4.4 Trimaran. Year. Length. Beam. Draft. Location. Price. 2021. 18' 11.5' 1' Missouri. $12,750. Description: 2021 Weta Trimaran. Barely used, new price 19,500. Super stable, easy to sail and incredibly fast. Hit speeds of 20 knots (23 mph). Road King Trailer and beach dolly included. View Wetas in action on Youtube! Weta Wiki The Weta is a 4.4 meter fibreglass/foam composite trimaran with a boomless main, jib and roller furling gennaker. It can be sailed single handed or with up to three adults. When rigged it has a beam of 3.5m, but when put away on its beach trolley the beam is just 1.7m. Year. 2021 Weta Trimaran 4.4 meter sailboat for sale in Florida Florida. $16,000. Description: Hull number 1315, purchased Mar 2021. Mint condition, washed after each use, garage stored. White hull, square top 9.3sqm main, self-tacking jib, yellow gennaker, galvanized road trailer and alluminum Weta beach dolly. Equipment: Carbon bow & float protectors, twin tiller with extensions, synthetic rigging with T ... Compact Weta Trimaran Screeches Past the Big Boys on Biscayne Bay In a David-and-Goliath replay, the 14-foot-6-inch long Weta trimaran streaked like an agile mouse amidst a herd of elephants. The big cruising cats certainly offer sumptuous accommodations, but they lumbered in the fickle 10- to 12-knot breeze that touched down and lifted off the bays green water. At the same time, the Weta 4.4 scooted off on ... Weta Trimaran 4.4 Meter Manufacturer : Weta. LOA : 4.4 m. Beam : 3.5. Hull : Fiberglass. Spars : Carbon. Folded Beam : 1.7 m. Beach Trolley Included Weta sailboats for sale by owner. 18' Weta 4.4 Trimaran Columbia, MissouriAsking $12,750. 36' Catalina MkII Sturgeon Bay, WisconsinAsking $78,000. 16' Hobie Cat Hobie 16 Sisters, OregonAsking $4,500. 9' Dyer Dhow Sailing Model North Kingstown, Rhode IslandAsking $3,500. 42' Endeavour 42cc Erie, PennsylvaniaAsking $110,000. Weta 4.4 Weta 4.4 is a 14′ 5″ / 4.4 m trimaran sailboat designed by Tim Clissold/Roger and Chris Kitchen and built by Weta Marine starting in 2004. Great choice! Your favorites are temporarily saved for this session. ... The WETA 4.4 is now manufactured by Xstreme Sailing Products of Indonesia. Retractable beam: 5.58'. Sail area - gennaker 8.0 ... Weta Trimaran Connects you with other Weta owners throughout North America. Provides the structure for Weta Racing and Social Events. Regulates class rules and maintains one-design practices. Attracts top-notch sailors by upholding high racing standards. Supports this website and WCNA events throughout the year. Includes a Forum of racing tips, event reports ... 2007 Weta Marine Weta 4.4 Trimaran Description: Larrikin is a beautiful 2007 Weta Trimaran - it's one of the earlier Wetas (Hull # 45) in the original canary yellow. The boat is in good condition; I am the 2nd owner, having purchased it in 2017 from the 1st owner who imported it originally but only sailed it a few times in the first 10 years all on inland lakes. Weta 4.4 Review Design and rigging. Meade Gougeon, USA sailing legend and cofounder of the West System Epoxy, spotted a Weta 4.4 on a Florida beach last autumn and was so impressed that he now sails his own Weta, which is a handsome accolade from a former 'Boat of the Year' judge in America. The Weta does indeed look different from anything else in the ... 10 reasons to love sailing your Wētā! An excellent sea boat, a Wētā is built for speed. And it's built from lightweight, high tech materials, meaning a Wētā is sturdy, stable, but light, ensuring even in gentle winds this beautifully balanced and responsive boat can get some sensational speeds up. With a bit of a breeze on you can reach speeds of 20 knots. Now that's some ... Weta 4.4 Trimaran, 2010, Selma, Oregon, $8,000, SOLD 7/8/20 Weta 4.4 Trimaran, 2010 #322 White Hulls, Red gennaker, black mylar main/jib. Stored under cover (included) in covered space for three years, used twice by me, the third owner. Sails, hulls, and gear in near original condition. No defects, no gouges, original running rigging in excellent shape. Includes beach dolly and trailer (dolly nests onto ... 2007 Weta Marine Weta 4.4 Trimaran sailboat for sale in Oregon 2007. 14.4'. 11.5'. .5'. Oregon. $6,500. Description: Description: Larrikin is a beautiful 2007 Weta Trimaran - it's one of the earlier Wetas (Hull # 45) in the original canary yellow. The boat is in good condition; I am the 2nd owner, having purchased it in 2017 from the 1st owner who imported it originally but only sailed it a few times in ... 2022 Weta 4.4 Trimaran Trimaran almost-new incl. self-tacking jib 2022 Weta 4.4 Trimaran Trimaran almost-new incl. self-tacking jib gennaker trailer & UV-resistant boat cover. St. Petersburg, FL, US. Listed May 5. Expired. $ ... The Weta has been meticulously cared for and maintained with a thorough rinsing, derigging, and covering routine after every use. The accompanying galvanized Road King Trailer has ... Weta sailboats for sale by owner. Weta preowned sailboats for sale by owner. Weta used sailboats for sale by owner. Home. Register & Post. View All Sailboats. Search. Avoid Fraud. ... 18' Weta 4.4 Trimaran Columbia, Missouri Asking $12,750. 27' Pacific Seacraft Orion Hingham, Massachusetts Asking $18,500. 39' O'Day Jeanneau design Lake Champlain, Vermont catamaran gulet motorboat riverboat sailboat trimaran yacht