Review of Amigo 33
Basic specs..
Both the hull and the deck is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.
The interior is like many other boats made of mahogany. Mahogany belongs to the hardwood species, known for being water-repellent and resistant to decay. It has an attractive wood grain and holds wood polish and varnish well. The boat is equipped with 4-5 berths, a galley, 65.0 liter fresh water capacity and toilet facility. Note: the boat has also been sold to be self-made/-interiored, which means that the quality of each boat may vary.
The boat equipped with a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.
The Amigo 33 has been built with different keel alternatives.
The Amigo 33 is equipped with a long keel. A full keel provide a better directional stability than a similar boat with a fin keel; on the other hand, better directional stability means also that the boat is more difficult to handle in a harbour with less space.
The keel is made of iron. Many people prefer lead keel in favour of iron. The main argument is that lead is much heavier than iron and a lead keel can therefore be made smaller which again result in less wet surface, i.e. less drag. In fact iron is quite heavy, just 30% less heavy than lead, so the advantage of a lead keel is often overstated.
Amigo 33 can enter even shallow marinas as the draft is just about 1.40 - 1.50 meter (4.59 - 4.89 ft) dependent on the load. See immersion rate below.
Unknown keel type
This keel is also made of iron.
The boat is typically equipped with an inboard Volvo Penta MD7 diesel engine
The transmission is a shaft drive. A shaft drive will in the long run require less maintenance than other types of drive e.g. a sail drive.
The fuel tank, which is made of stainless steel, has a capacity of 50.0 liters (13 US gallons, 10 imperial gallons).
![](http://gbes.online/777/templates/cheerup/res/banner1.jpg)
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Amigo 33 is 1.81, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 6.5 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Amigo 33 is about 134 kg/cm, alternatively 751 lbs/inch. Meaning: if you load 134 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 751 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
What is L/B (Length Beam Ratio)?
What is a Ballast Ratio?
What is Displacement Length Ratio?
What is Relative Speed Performance?
Maintenance
When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 15m 2 (161 ft 2 ). Based on this, your favourite maritime shop can tell you the quantity you need.
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
Usage | Length | Diameter | ||
Jib sheet | 9.0 m | (29.5 feet) | 10 mm | (3/8 inch) |
Genoa sheet | 9.0 m | (29.5 feet) | 10 mm | (3/8 inch) |
Mainsheet | 22.5 m | (73.8 feet) | 10 mm | (3/8 inch) |
Spinnaker sheet | 19.8 m | (65.0 feet) | 10 mm | (3/8 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Amigo 33 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.
The Amigo 33 is a 29.53ft masthead sloop designed by Carl Andersson and built in fiberglass by Amigo Yachts (SWE) between 1981 and 1990.
46 units have been built..
The Amigo 33 is a moderate weight sailboat which is under powered. It is very stable / stiff and has a good righting capability if capsized. It is best suited as a coastal cruiser.
![Amigo 33 - photo 1/2 Amigo 33 sailboat under sail](https://sailboatlab.com/media/photos/amigo_33_photo.jpg)
Amigo 33 for sale elsewhere on the web:
![amigo 33 sailboat amigo 33 sailboat](https://sailboatlab.com/media/photos_for_sale/logo-google.jpg)
Main features
Model | Amigo 33 | ||
Length | 29.53 ft | ||
Beam | 9.87 ft | ||
Draft | 4.60 ft | ||
Country | Sweden (Europe) | ||
Estimated price | $ 0 | ?? |
Login or register to personnalize this screen.
You will be able to pin external links of your choice.
![amigo 33 sailboat amigo 33 sailboat](https://i.ytimg.com/vi/uRvS_kvR4Q0/hqdefault.jpg)
See how Sailboatlab works in video
Sail area / displ. | 0 | ?? | |
Ballast / displ. | 44.74 % | ||
Displ. / length | 289.67 | ||
Comfort ratio | 24.27 | ||
Capsize | 1.95 |
Hull type | Monohull long keel | ||
Construction | Fiberglass | ||
Waterline length | 23.46 ft | ||
Maximum draft | 4.60 ft | ||
Displacement | 8378 lbs | ||
Ballast | 3748 lbs | ||
Hull speed | 6.49 knots |
We help you build your own hydraulic steering system - Lecomble & Schmitt
Rigging | Masthead Sloop | ||
Sail area (100%) | 0 sq.ft | ?? | |
Air draft | 0 ft | ?? | |
Sail area fore | 0 sq.ft | ?? | |
Sail area main | 0 sq.ft | ?? | |
I | 0 ft | ?? | |
J | 0 ft | ?? | |
P | 0 ft | ?? | |
E | 0 ft | ?? |
Nb engines | 1 | ||
Total power | 21 HP | ||
Fuel capacity | 0 gals |
Accommodations
Water capacity | 0 gals | ||
Headroom | 0 ft | ||
Nb of cabins | 0 | ||
Nb of berths | 0 | ||
Nb heads | 0 |
Builder data
Builder | Amigo Yachts (SWE) | ||
Designer | Carl Andersson | ||
First built | 1981 | ||
Last built | 1990 | ||
Number built | 46 |
![](http://gbes.online/777/templates/cheerup/res/banner1.jpg)
Other photos
![Amigo 33 amigo 33 sailboat](https://sailboatlab.com/media/photos/amigo_33_drawing.jpg)
Modal Title
The content of your modal.
Personalize your sailboat data sheet
Home > Find Your Sail > Search by Make and Model > Amigo > Amigo 33
" * " indicates required fields
Step 1 of 3
Let's Get to Know Each Other
Let's connect, why it's important to partner with a designer on your amigo 33 sail.
The design is the most critical part of your new sail. Ensuring the sail fits and performs its best is a must for our crew. The Precision Sails Design team are experts at their craft. Unlike other sail lofts all of our sailors work one-on-one with a designer to perfect their Amigo 33 sail.
No Two Amigo 33 Sails Are Alike
There are many factors that affect the performance and design of your sails. Location, sailing experience, and weather conditions all come into play when picking the perfect sail. Two mainsails made for two Amigo 33’s in California and Florida will have different designs, sailcloth, and options based on what is best for the sailor.
Taking measurements is easy. All sailors work alongside our measurement team to measure and confirm their rig specs. This helps ensure your design is flawless and allows us to extend our Perfect Fit Guarantee to all of our sailors.
Discover the best cloth for your sailing needs, our sail details, or more about how Precision Sails is leading the sail-making industry with innovative new practices.
![amigo 33 sailboat Headsail-And-Mainsail-in-the-Bahamas](https://www.precisionsailloft.com/wp-content/uploads/2023/12/Headsail-And-Mainsail-in-the-Bahamas.jpg)
Proudly offering the largest selection of sailcloth in the industry, our team is always available to help you find your perfect sail. Whether you're a weekend sailor, coastal cruiser, or club racer our team is ready to walk you through the process.
Types of Sails
Precision Sail Loft specializes in producing headsails, mainsails, spinnakers, gennakers, and code zeros. So no matter the type of sail you’re looking for, we can help. Our sails are trusted by cruisers and racers alike from around the globe. Review the sail options and craftsmanship available to customize your dream sail.
Build & Process
Every sail we craft is produced to the highest standards with the best hardware, craftsmanship, and skill-set in the industry. Pair that with Precision Sails' approach to communication and your sailboat will be ready to set sail before you know it.
Unparalleled Commitment To Helping Sailors
As experts in design, communication, and production our team is ready to take on the task of making sails for your boat. Give us a call to get started.
“ I just received my asymmetrical spinnaker, with sock and turtle bag, along with a new 135 Genoa. The entire process was simple and both sales and the design team were in regular contact if there were any questions. The customer portal was easy to use and lets you keep track of where in the process your sails are. Great sails, great service -Graham Edwards (Facebook)
“ The whole team at Precision Sails was fantastic from start to finish. We’ve had a laminate main and genoa made so far and have a spinnaker on the way. They listened carefully to our needs and recommended a great sail cloth. We couldn’t have gotten more bang for our buck! -Noah Regelous (Google)
“ We received our spinnaker and launched it yesterday and I just wanted to let you know how pleased we are with it. The service we received from your company was exceptional and the quality of your product is second to none. We will certainly be return customers in the next few months to replace our main and jib sails and will recommend your company to all our sailing buddies. Once again-thank you.” -Daniel Jackson (Google)
“ we had good communication during the planning stages and the knowledgeable people at precision sails really got me fixed up good! The sails look and work fabulous! my boat sails better than it ever had! couldn’t be more pleased with the product AND the service!” -Fred Jelich (Facebook)
“ Our new furling jib for a Corsair 27 Had to be specially designed due to the height of the furler, but this was accomplished quickly and in short order we had our sail which fits beautifully and has a great shape. It’s everything we could have wanted, high tech design, thoughtfully executed and affordable.” -Nancy Y. (Yelp)
Request a Amigo 33 Quote
Looking to buy a new headsail or mainsail for your Amigo 33? Request a free quote from Precision Sails for a new custom sail. Our team will work with you to design the perfect sail for you.
Thanks for telling us a bit about yourself and your boat. Our team will send you a preliminary quote based on information we have gathered from sailors similar to you.
We will give you a call in order to narrow down the options on your quote and improve the accuracy. If you want us to call you at a specific time, feel free to schedule a time on our calendar!
Thanks for telling us a bit about yourself and your boat. Our team will reach out to offer some suggestions and get started on finding you the perfect sail!
![](http://gbes.online/777/templates/cheerup/res/banner1.jpg)
IMAGES