Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

  • Sailboat Guide

Merit 25 is a 24 ′ 6 ″ / 7.5 m monohull sailboat designed by Paul Yates and built by Merit Marine Inc. starting in 1978.

Drawing of Merit 25

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

  • SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
  • D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

  • D: Displacement of the boat in pounds.
  • LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

  • D: Displacement of the boat in pounds
  • LOA: Length overall in feet
  • Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Embed this page on your own website by copying and pasting this code.

  • About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

MERIT 25 Detailed Review

https://images.harbormoor.com/originals/324f4120-52c2-45ef-8a11-694e35e99a87

If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of MERIT 25. Built by Merit Marine Inc. and designed by Paul Yates, the boat was first built in 1978. It has a hull type of Fin w/spade rudder and LOA is 7.47. Its sail area/displacement ratio 21.85. Its auxiliary power tank, manufactured by undefined, runs on undefined.

MERIT 25 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about MERIT 25 and decide if it is a fit for your boating needs.

Boat Information

Boat specifications, sail boat calculation, rig and sail specs, contributions, who designed the merit 25.

MERIT 25 was designed by Paul Yates.

Who builds MERIT 25?

MERIT 25 is built by Merit Marine Inc..

When was MERIT 25 first built?

MERIT 25 was first built in 1978.

How long is MERIT 25?

MERIT 25 is 6.1 m in length.

What is mast height on MERIT 25?

MERIT 25 has a mast height of 8.53 m.

Member Boats at HarborMoor

Review of Merit 25

Basic specs..

The Merit 25 is equipped with a fin keel. A boat with a fin keel is more manoeuvrable but has less directional stability than a similar boat with a long keel.

The boat can enter even shallow marinas as the draft is just about 1.22 - 1.32 meter (4.00 - 4.30 ft) dependent on the load. See immersion rate below.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.1 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Merit 25 is about 102 kg/cm, alternatively 572 lbs/inch. Meaning: if you load 102 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 572 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

What is L/B (Length Beam Ratio)?

Maintenance

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 17m 2 (182 ft 2 ). Based on this, your favourite maritime shop can tell you the quantity you need.

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

UsageLengthDiameter
Mainsail halyard 22.6 m(74.2 feet)8 mm(5/16 inch)
Jib/genoa halyard22.6 m(74.2 feet)8 mm(5/16 inch)
Spinnaker halyard22.6 m(74.2 feet)8 mm(5/16 inch)
Jib sheet 7.6 m(25.0 feet)10 mm(3/8 inch)
Genoa sheet7.6 m(25.0 feet)10 mm(3/8 inch)
Mainsheet 19.1 m(62.5 feet)10 mm(3/8 inch)
Spinnaker sheet16.8 m(55.0 feet)10 mm(3/8 inch)
Cunningham3.0 m(9.7 feet)8 mm(5/16 inch)
Kickingstrap5.9 m(19.4 feet)8 mm(5/16 inch)
Clew-outhaul5.9 m(19.4 feet)8 mm(5/16 inch)

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

We are always looking for new photos. If you can contribute with photos for Merit 25 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.

The Merit 25 is a 24.5ft fractional sloop designed by Paul Yates and built in fiberglass by Merit Marine Inc. since 1978.

780 units have been built..

The Merit 25 is a light sailboat which is a high performer. It is stable / stiff and has a low righting capability if capsized. It is best suited as a racing boat.

Merit 25 for sale elsewhere on the web:

merit 25 sailboat interior

Main features

Model Merit 25
Length 24.50 ft
Beam 8 ft
Draft 4 ft
Country United states (North America)
Estimated price $ 0 ??

Login or register to personnalize this screen.

You will be able to pin external links of your choice.

merit 25 sailboat interior

See how Sailboatlab works in video

Sail area / displ. 21.85
Ballast / displ. 36.21 %
Displ. / length 161.83
Comfort ratio 13.15
Capsize 2.25
Hull type Monohull fin keel with spade rudder
Construction Fiberglass
Waterline length 20 ft
Maximum draft 4 ft
Displacement 2900 lbs
Ballast 1050 lbs
Hull speed 5.99 knots

merit 25 sailboat interior

We help you build your own hydraulic steering system - Lecomble & Schmitt

Rigging Fractional Sloop
Sail area (100%) 277 sq.ft
Air draft 0 ft ??
Sail area fore 138.86 sq.ft
Sail area main 136.50 sq.ft
I 28.75 ft
J 9.66 ft
P 28 ft
E 9.75 ft
Nb engines 1
Total power 0 HP
Fuel capacity 0 gals

Accommodations

Water capacity 0 gals
Headroom 0 ft
Nb of cabins 0
Nb of berths 0
Nb heads 0

Builder data

Builder Merit Marine Inc.
Designer Paul Yates
First built 1978
Last built 0 ??
Number built 780

Other photos

merit 25 sailboat interior

Modal Title

The content of your modal.

Personalize your sailboat data sheet

Paste a link here:

Give it a title:

And eventually a link to an image for the thumbnail:

merit 25 sailboat interior

  • Learn to Sail Memberships
  • Private Lessons
  • Online Learning
  • Group Sails, Racing & Events
  • Memberships
  • Reciprocal Privileges
  • Members Only
  • Tahiti May 2024
  • Croatia September 2024
  • British Virgin Islands December 2024
  • Skippered Sails
  • Corporate Events

Merit 25

Quantity:  16 sailboats

Max capacity:  5 people*

Required Skipper Skill Level: Basic Coastal Cruising (ASA 103) or equivalent experience

Not ready to skipper?  Join a group sail

The Merit 25 is a solidly built 25-foot sloop that seats five comfortably in a self-draining cockpit. Despite relatively simple control systems, the Merit has the durability and flexibility for comfortable, all-season sailing in the Bay Area, where typical wind speeds can range from near zero to above 25 knots.  Spinnaker’s Merits are rigged for sailing in good daytime visibility under a full main and working-size roller-furled jib. Most of the club’s Merits can carry spinnakers as well. All the mainsails can be reefed for winds above 18 or so knots. In strong winds, the boat can be sailed comfortably under reefed main and reduced or completely furled jib.

Merit 25 Skippered Charter

*Hosting a large group?  Check out our team building program

Midweek Rates 
2 Hours3 Hours4 HoursPer each additional hour
445555665110
Weekend & Holiday Rates 
2 Hours3 Hours4 HoursPer each additional hour
580690110

* Due to USCG regulations, this boat can take up to four passengers

*Skipper gratuity not included

Merit 25 Bareboat Charters

*You must be a Club Member to bareboat charter

MidweekWeekend
SunsetFull DayFull Day
195225250

Learn About Upcoming Events

  • 451 Seaport Court
  • Redwood City, CA 94063
  • 650-363-1390
  • Rich Ferrari, The Chief
  • Bob Diamond, School and Vacations Director
  • Dana Ochstein
  • Instructors
  • Redwood Landing Marina

Copyright © 2021  Spinnaker Sailing Inc. All Rights Reserved.

SailNet Community banner

  • Forum Listing
  • Marketplace
  • Advanced Search
  • About The Boat
  • Boat Review Forum
  • SailNet is a forum community dedicated to Sailing enthusiasts. Come join the discussion about sailing, modifications, classifieds, troubleshooting, repairs, reviews, maintenance, and more!

Merit 25 - is it worth the haul?

merit 25 sailboat interior

  • Add to quote

http://www.sailingtexas.com/smerit25j.html This is boat I'm looking at and I was wondering if its really worth the gas money and time to haul back to northern VA. Its been pretty hard to find one around here for this ones asking price. Looks to be in nice shape. If the owner met me 1/2 way would that help the deal? Any advice is appreciated. Thanks.  

merit 25 sailboat interior

Of course, you might consider sailing her actually, and then a survey... if you agree on the price, then the half way meeting makes sense...  

merit 25 sailboat interior

Come to Maryland There's a good looking Merit 25 for sale at my marina. I don't know the price but can send you the phone number for the owner so that you can talk to him directly. They are terrific boats, and nice looking too. It's on the hard at Oak Harbor Marina, Pasadena, MD (north of Annapolis.)  

SailorMitch said: There's a good looking Merit 25 for sale at my marina. I don't know the price but can send you the phone number for the owner so that you can talk to him directly. They are terrific boats, and nice looking too. It's on the hard at Oak Harbor Marina, Pasadena, MD (north of Annapolis.) Click to expand...

merit 25 sailboat interior

Pheonomenal Boat!  

here in los angeles, my sailing school/club owns a number of merit 25's, and i've seen them at other sailing schools i've visited. i do not know why it's a popular school boat, but i'm sure it's not a coincidence. i am going to try one next week. it's a sharp-looking boat; but for now, that's all i know about them.  

  • ?            
  • 175.3K members

Top Contributors this Month

merit 25 sailboat interior

IMAGES

  1. 1982 Merit 25 sailboat for sale in Idaho

    merit 25 sailboat interior

  2. 1983 Merit 25 sailboat for sale in Texas

    merit 25 sailboat interior

  3. Merit 25, 1984, Hickory, North Carolina, sailboat for sale from Sailing

    merit 25 sailboat interior

  4. Merit 25 sailboat for sale

    merit 25 sailboat interior

  5. Merit 25 sailboat for sale

    merit 25 sailboat interior

  6. Merit 25. 1984, Belton, Texas, sailboat for sale from Sailing Texas

    merit 25 sailboat interior

VIDEO

  1. Wicked Salty Sailing Merit 25

  2. Hallberg Rassy 312 "Ellös"

  3. This Sailboat is READY to SAIL ANYWHERE / Right Now!

  4. tacking Merit 25, 1 sailor

  5. The Magic of Merit 22 Sailboat #sailing #boat #shorts

  6. Refitting Risque II

COMMENTS

  1. Merit 25

    The boat has internally mast-mounted halyards, spinnaker-pole lift and outhaul, plus an internally-mounted reefing system. The 4:1 mainsheet traveler is mounted in the middle of the cockpit. A boom vang and Cunningham are standard equipment.

  2. Merit 25

    Merit 25 is a 24′ 6″ / 7.5 m monohull sailboat designed by Paul Yates and built by Merit Marine Inc. starting in 1978.

  3. MERIT 25: Reviews, Specifications, Built, Engine

    MERIT 25 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about MERIT 25 and decide if it is a fit for your boating needs.

  4. Review of Merit 25

    The Merit 25 is equipped with a fin keel. The fin keel is the most common keel and provides splendid manoeuvrability. The downside is that it has less directional stability than a long keel. The boat can enter even shallow marinas as the draft is just about 1.22 - 1.32 meter (4.00 - 4.30 ft) dependent on the load. See immersion rate below.

  5. Merit 25

    The Merit 25 is a 24.5ft fractional sloop designed by Paul Yates and built in fiberglass by Merit Marine Inc. since 1978. 780 units have been built. The Merit 25 is a light sailboat which is a high performer.

  6. Merit 25

    The Merit 25 is a solidly built 25-foot sloop that seats five comfortably in a self-draining cockpit. Despite relatively simple control systems, the Merit has the durability and flexibility for comfortable, all-season sailing in the Bay Area, where typical wind speeds can range from near zero to above 25 knots.

  7. Merit 25 Columbia River Fleet

    The Merit 25 is a multipurpose racer/cruiser that sacrifices very little with a large comfortable cockpit and high ballast to displacement ratio make it a confident and stable daysailor with a functional interior that invites weekend cruising. Merits 25’s have raced both PHRF and One-Design with outstanding success.

  8. Merit 25

    There's a good looking Merit 25 for sale at my marina. I don't know the price but can send you the phone number for the owner so that you can talk to him directly. They are terrific boats, and nice looking too. It's on the hard at Oak Harbor Marina, Pasadena, MD (north of Annapolis.)